Best Brass Gas Fittings

TL TOOLEGIN Brass Hose Barb Fitting Union/Splicer/Mender/Joiner Assortment Kits 3/16 1/4 5/16 3/8 1/2 5/8 Barbed x Barbed 6pcs

For use with LP and natural gas, refrigeration, and hydraulic applications.
Temperature control circuits,pneumatic circuits,cacuum and fluid systems test apparatus,lubricant,coolantlines, Temperature range of -40°F to 160°F (-53°C to 121°C).
CA360 Brass fittings,CA377 Brass for forged fittings.Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability..
NOT DEEMED LEAD FREE. NOT FOR POTABLE WATER.

Check Stock

Kinchoix 24" Flexible Yellow Coated Gas Hose Connector Kit for Stove Dryer Furnace Gas Water Heater Flexible Gas Line with Connector 3/4" FIP & 3/4"MIP Fitting

...Thicker pipe diameter can transmission gas quickly..
「STURDY MATERIAL」- The inside of the flexible gas line is stainless steel SUS304 corrosion-resistant material, the surface layer is 0.079inch UV-resistant yellow polyethylene jacket, comes with a 3/4" male brass fittings on both end, standard male and female pipe threads for easy connection..
「EASY TO INSTALL」- Easy to install the hose connector kit for your gas dryer. Only one wrench and a little bit teflon tape are all you need to install the hose..
「CAUTION」- The connectors and fittings are designed for use only on the original installation and not to be reused for another gas appliance or at another location. Test for leaks only with leak test solution. Rinse with clean water after leak testing..

Check Stock

Hardkits 69 pcs Brass Hose Barb Fittings Assortment Kits 1/8 3/16 1/4 5/16 3/8 1/2 Barb Splicer & Barb To Male Coupler & Tee

【PACKAGE INCLUDES】 -----This Barb Fittings Assortment contains Splicer 3/16"(5) 1/4"(5) 5/16"(5) 3/8"(5) 1/2"(5) ，Barb Tee:1/8"(2) 3/16"(2) 1/4"(2) 5/16"(2) 3/8"(2) 1/2"(2).
【PACKAGE INCLUDES】 ----- This npt barb kits contains Male Coupler: 3/16" barb to 1/8" MNPT(2) 1/4" barb to 1/8" MNPT (2) 1/4" barb to 1/4" MNPT (2) 5/16" barb to 1/4" MNPT (4) 5/16" barb to 3/8" MNPT (4) 3/8" barb to 1/4" MNPT(4) 3/8" barb to 3/8" MNPT(2) 1/2" barb to 3/8" MNPT(2) 1/2" barb to 1/2" MNPT(2) &304 stainless steel clamp rings 8 pcs.
【CREATE A GOOD SEALING】 ----- NPT barb assortmentUse these hose barb fittings and clamp rings to efficiently connect the flexible tubing or hose. This assorted brass barbed fittings set would allow you to maintain a tight seal..
【WIDE APPLICATIONS】 ----- This brass crimp fitting are essential component to prevent leakage of oil, gas, fluid and fuel. Great for industrial use, automotive, aquarium, marine and much more..
【HIGH QUALITY】Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability，Temperatures range from -40 to 260 F..

Check Stock

SUNGATOR 3 Pack Barbed Brass Hose Fittings 1/2 Barb to 1/2 NPT Male Threaded End Fittings Hose Connector Adapter with Sealing Tape and Hose Clamps

【SIZE AND PACKAGING】: 1/2"barb X 1/2"NPT male pipe, package includes 3 hose barb fittings, 1 sealing tape, 3 hose clamps.
【DURABLE】: Made of High quality solid brass, not a cast product and has a thick wall, this hose barb fitting is firm and durable, and provides high resistance to abrasion and corrosion, longer service life than iron and iron galvanized pipe fittings.
【SUPERIOR THREADS】: Deeper and smoother threads with barbed edges provide effective and tight connection, not easy to slip.
【OPERATING TEMPERATURES】: Solid brass can withstand up to 100 °C (212 °F).
【FUNCTION】: Barb head for connecting hoses, NPT male end used to connect NPT pipes, the hose barb fittings can apply to gas, oil and fuel as well as air tools.

Check Stock

Slime 40069 Inflation Station, Garage Inflator, Pro-Series, Wall Mounted Air on Demand, Flat to Full in 4 Minutes, Cars, Trucks, Bicycles, 120V,Black

...or gas tube,Compressor gas tube,Grill gas line.etc.
【Sturdy material 】- The inside of the flexible gas line is stainless steel SUS304 corrosion-resistant material, the surface layer is 0.079inch UV-resistant yellow polyethylene jacket, Comes with a 1/2" MALE Brass fittings on both end, Standard Male and Female Pipe Threads for easy connections..
【Flexible and Safety】- Corrugated Stainless Steel Tubing is flexible and can be cut into any length you need,easily snakes into attic and basements areas, around corners and bends, Using one-piece molding exquisite Craft, There is no interface in the middle of the pipe body, reducing the connection point and preventing gas leakage.Really convenient and 100% safety..
【Installation】-High temperature resistance,Low pressure resistance,Explosion-proof and compressive material, it can be installed exposed to indoor light , or it can also be embedded in concrete, or behind the wall in dry wall systems as needed. also Suitable for burial installation,Underground Installation easier to handle Bends around corners,eliminating need for additional joints and fittings..

Check Stock

SUNGATOR Brass Barbed Hose Fittings 1 Barb to 1 NPT Male Threaded End Hose Barb Pipe Fittings Hose Adapter Connector with Sealing Tape and Hose Clamps 2 Pack

【SIZE AND PACKAGING】: 1"barb X 1"NPT male pipe, package includes 2 hose barb fittings, 1 sealing tape, 2 hose clamps.
【DURABLE】: Made of High quality solid brass, not a cast product and has a thick wall, this hose barb fitting is firm and durable, and provides high resistance to abrasion and corrosion, longer service life than iron and iron galvanized pipe fittings.
【SUPERIOR THREADS】: Deeper and smoother threads with barbed edges provide effective and tight connection, not easy to slip.
【OPERATING TEMPERATURES】: Solid brass can withstand up to 100 °C (212 °F).
【FUNCTION】: Barb head for connecting hoses, NPT male end used to connect NPT pipes, the hose barb fittings can apply to gas, oil and fuel.

Check Stock

DOZYANT 12 Feet 1/2 inch ID Natural Gas Grill Hose with Quick Connect Fittings Assembly for Low Pressure Appliance -3/8 Female to 1/2 Male Adapter for Outdoor NG/Propane Appliance - CSA Certified

The 3/8" Female Flare by 1/2" Male Flare Brass Adapter is included to allows you to convert NG to 3/8" male connector standard propane appliance.
1/2" ID Hose with 1/2" Quick Disconnect Plug x 1/2" Female Flare Fittings & 3/8" Female Flare by 1/2" Male Flare Brass Adapter.
1/2 inch inside diameter hose has the BTU capacity needed for 30-inch and larger grills for use with natural gas.
12 Feet Flexible hose used in natural gas or propane applications, allows you to move gas appliance around. Connects any outdoor NG appliance to the....
Comes with dust cap and plug to protect the brass adapter.CSA certificated - Pass CSA certificate for your safety.

Check Stock

NQN 12 Foot 0-30 PSI High Pressure Adjustable Propane Regulator with Gauge 0~60PSI Gas Flow Indicator, Gas Cooker 3/8inch Female Flare Fitting, Stainless Steel Braided Hose and Gas Grill LP Regulator

Flare Male, 3/8" Flare Male x 3/8" Flare Male, 1/4" NPT Male x 3/8" Flare Male, 1/8" NPT Male x 3/8" Flare Male, 3/8" Brass Gas Ball Valve. These conversion connection extand the outdoor.
【Premium Material】3/8" female flare fittings on both ends and 7 different types of adapters fittings kit of this 3/8" propane hose are made of 100% Solid Brass to ensure secure and durable for long-lasting to use. The 3/8” Female Flare propane hose is made of durable stainless steel braided with anti corrosion, anti-aging, air tightness, heat-resistance, flexibility features. This propane extension hose with CSA Certification, ensures air tightness and stability. High Pressure: 350 PSI..
【Standard Fittings】This 3/8" Female Fitting x 3/8" Female Fitting Propane Hose comes with 7 different types of adapter adapters. Excellent 3/8" Propane Hose Conversion Adapter Kit for easy storage and portability, flexible use and space saving. This 12ft Braided Stainless Steel High Pressure Propane Extension Hose comes with a standard connector kit to take all your worries away. For RVs Best choice, travel trailer..

Check Stock

Gas Flex 3/4 GAS Tubing Pipe KIT 33 Ft with 2 Fittings GasFlex Natural GAS Propane

FLEXIBLE ALUMINUM PIPE WITH INSIDE AND OUTSIDE PE COVER.
3/4" Nominal Pipe size: 16mm ID x 20mm OD (0.625" ID x 0.787" OD).
CAPACITY: 220,000 BTUH FOR LPG APPLIANCES : 200,000 BTUH FOR NATURAL GAS APPLIANCES.
KIT arrives with the brass connectors hand tightened for ease of installation.
Comes with 2 fittings , the fittings are MALE NPT 3/4" both ends.

Check Stock