Best Brass copper Fittings

CDQBWKJGFJ 3 Pcs Brass Compression Fitting 3/16 Tube OD x 1/4 OD Union Reducer Connector

  • Three piece construction - nut, sleeve and body.
  • Compression Fittings do not require any flaring, soldering or other type of tubing preparation..
  • Brass for corrosion resistance, high temperature ductility and low magnetic permeability.
  • For copper, brass, aluminum, or plastic tubing.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

SharkBite 1/2 Inch Disconnect Tongs for Push to Connect Brass Plumbing Fittings, U711

  • SHARKBITE REMOVAL TOOL: 1/2 inch disconnect tongs allow for brass push connect fittings to be disconnected from the pipe quickly and easily.
  • can remove or adjust push to connect fittings in tight spaces for easy disassembly.
  • COPPER, PEX, CPVC, CTS, HDPE: SharkBite disconnect tong is compatible with copper tubing, CTS, CPVC, HDPE, and PEX fittings, and connects all three types in any combination, ideal for working in tight work spaces.
  • DURABLE AND HIGH QUALITY: Fitting remover is made with durable stainless steel and wide grip handles by a name you know and trust.
  • SharkBite's quality and performance are field-proven and trusted in the plumbing industry.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
  • MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA.
Check Stock

Exchilerator Basic - Efficient Wort Chiller for Home Brew Beer - 25% Faster Than Stainless Steel Chiller - Best Counterflow Wort Chiller - Great Home Brewers Gift

  • EASY TO USE - FAST CLEAN UP. The Maxx is for a brewer with pump, without pumps or with warm chilling water..
  • USES FDA COMPLIANT copper, PEX, stainless collars, lead free solder and lead free brass fittings. Unlike garden hose designs with so called adjustable nut and ferrule fittings, the ExChilerator is skillfully soldered the full length of the fittings this leaves no place for infections to hide! (see cross sectional photos).
  • COMES READY for you to apply 1/2 Inch National Pipe Thread fittings of your choice..
  • 5 GALLONS 5MINUTES 5 YEAR WARRANTY. YOU DESERVE THE QUALITY AND WORKMANSHIP OF THE MAXX ON YOUR PERSONAL AND UNIQUE BREW STAND!.
  • COPPER CHILLS FASTER THAN STAINLESS BUY YOURS TODAY !.
Check Stock

AINEED Hose Repair Kit, 3 Sets Solid Brass Garden Hose Quick Connect Male to Female Connectors, 3 Sets 3/4 Inch Brass Garden Hose Repair Connector with 6 Pieces Stainless Steel Clamps

  • [Quick and Easy to Install] These garden hose fittings are very easy to connect and disconnect, quick release allows for easy attach and removal of hose. Convenient quick connect hose adapter provides tight, secure fittings, no-Leak connection.
  • [Life Time Warranty] Confident in our products, if for any reason you are not SATISFIED, contact us and our customer service team will help you RETURN or REFUND.
  • [Package Includes] Come with 3 sets of brass male and female quick connectors, 3 sets of aluminum garden hose repair kit and 6 pieces rubber washers. This hose quick connect brass set is durable and leak-free for gardening use in all sessions.
  • [Sturdy Hose Repair Kit] 3 male & 3 female garden hose repair ends, made of premium aluminum with copper-like color surface, and 304 stainless steel clamps, use for repairing or replacing broken female or male hose connector, water hose end.
  • [Durable Material] Made of high quality brass, rust proof solid brass to make sure connector fittings are durable enough with no leaking quality. Quick disconnect fittings allow easy attach and removal of the connector anytime.
Check Stock

Aquiflux Self Pickling Flux for Precious Metals Gold Silver Jewelry and Hard Soldering (32 oz.)

  • Nokorode regular paste solder flux lead free, 8 oz.
  • Recroseal's nokorode regular paste solder flux 8Oz.
  • Cleans and fluxes in one operation saving time and money.
  • Special oil base protects the solder joint against corrosive attack.
  • It's non-aggressive formula is ideal when used on copper and brass fittings.
  • Lead free and acid free-safe to use on potable water systems.
  • When heated, it reduces surface tension and allows the solder to flow easily and uniformly into the joint.
Check Stock

1/8\ Compression Union Brass Tube Fitting, 1/8\ OD x 1/8\ OD, 5pcs

  • Three piece construction - nut, sleeve and body with attached insert.Easy to disassemble no flaring tool required..
  • Use with copper, brass, aluminum, or plastic tubing. -65 Degree F to +250 degree F temperature range. Standard fittings use short nuts..
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

SharkBite 1/2 Inch Disconnect Clip for Push to Connect Brass Plumbing Fittings, U710A

  • SHARKBITE DISCONNECT CLIP: 1/2 inch disconnect clips allow for universal brass push connect fittings to be disconnected from the pipe quickly and easily.
  • can remove or adjust push to connect fittings with no tools, crimping, glue or soldering required.
  • COPPER, PEX, CPVC, CTS, HDPE: SharkBite disconnect clip is compatible with copper tubing, CTS, CPVC, HDPE, and PEX fittings, and connects all three types in any combination, ideal for working in tight work spaces.
  • DURABLE AND HIGH QUALITY: Fitting remover is made of durable and lightweight plastic with wide grip handles by a name you know and trust.
  • SharkBite's quality and performance are field-proven and trusted in the plumbing industry.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
  • MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA.
Check Stock

EilxMag DOT Air Line Fittings Assortment, 44 Pcs Push to Connect Fittings NPT Male Thread & DOT Brass Air Brake Line Fittings Kit

  • 【Premium Material】: Our air line fittings are made of PBT Plastic, the air brake brass fittings DOT approved are made of high quality CA360 brass, with corrosion resistance, high temperature ductility and low permeability. Great for long time use..
  • 【Quantity】: Unique dot air line quick connect fittings nylon tubing kit: The plastic tube fittings contain 28 pieces: 8 pcs Male straight push connectors, 6 pcs Straight tube unions. 6 pcs 90 degree Elbows. 4 pcs 90 degree Elbows NPT thread. 4 pcs Tube tees. The brass tube fittings contain 16 pieces: 5 pcs Male connectors. 5 pcs Male 90° elbows. 3 pcs Tube tees. 3 pcs Tube unions. Fit type: 1/2", 3/8", 1/4"..
  • 【Typical Application】: The push-to-connect fitting 1/4 inch are suitable for PU / PA / PE / PVC. The dot air fittings assortment can be used with air systems, and copper tubing in air brake systems. They are widely applied in automotive, manufacturing production lines, car or truck repair, industrial workshops, daily garden or lawn mower repair, towing machine hose connections and so on..
  • 【Easy to install】: Our air fitting kit quicks....
Check Stock

AMZCNC Copper Tube Fittings Crimping Tool Copper Pipe Crimper Press with 1/2,3/4 and 1 inch Jaw for ProPress Copper Fitting-Manufactured Plumbing, Pipe Press Copper Crimp Tool

  • Built-in Dual Jaw: IWS-1234PS copper ring crimp tool with built-in 1/2”&3/4'' well-polished jaw, Go/No-Go gauge,and instruction manual on how to make a crimp connection, check connections with Go-No-Go gauge and calibrate the tool.
  • Purpose: IWS-1234PS F1807 PEX crimp tool is designed to compress copper crimp rings to secure PEX or PE-RT tubing to brass or poly crimp fittings.
  • Capacity: Works with 2 major sizes of PEX tubing - 1/2" and 3/4" Factory calibrated and meets ASTM F-1807 standard.
  • Compatibility: Copper crimp rings (Sioux Chief, Watts, Nibco and other brands). Brass or Poly crimp style PEX fittings. All types and brands of PEX tubing - Everhot, Viega, Nibco, Watts, etc.
  • Smooth actuation mechanism allows secure connections with minimal force required. Hardened steel construction ensures reliability and durability.
Check Stock