Best Brass Outside Tap Fittings

Browning 1427049408 Fitted Case Chesapeake Blk/BRN Over/Under 34

  • Solid wood frame covered with black vinyl and alligator-pattern brown vinyl trim.
  • Accessory compartment and elastic retainers for four choke tubes.
  • Solid brass hinges, fittings and latches.
  • Buckmark oval brass plaque on the outside.
Check Stock

IBC Tote Fittings with Valve Tote Adapter 2.95' Coarse Thread Tote Ball Valve Heavy Duty Tote Tank Drain Ball Valve Connector for Water Liquid Container NPT DN50

  • Applicable Model – Entrance 60cm thick thread (conventional tonnage barrel DN40/50 ball valve butterfly valve outlet size). The outlet 6-point pipeline of the water tank adapter can be connected to conventional PPR, PVC, metal pipe valves, etc. Accepts standard 1/2″ (13mm) garden hose with snap-on hose fittings.
  • Replacement Ton Barrels Faucet – Replace the new water tank adapter in time to protect the life of your existing valve or for fine flow control. This is a good way to stop beating the knuckles on the tank cage and allows you to draw water off a tank with ease, the tap also acts as useful back up safety valve.
  • Wide Applicable – Suitable for IBC containers/ton buckets, garden hoses, watering equipment, pressure washers, RVs, campers, boats, faucets, lawn sprinklers, can withstand agricultural water, reverse osmosis, ink, paint, etc. liquids, coatings, waste water, etc.
Check Stock

Maxline M7580 Master Kit, 3/4-Inch x 300-Feet

  • of 3/4-Inch Tubing, (3) Air Outlet Kits, (2) Tee Fittings, 3/4-Inch Straight Fitting, (20) Pipe Clips, Debar and Cutter Tool.
  • 175 psi maximum working pressure, 3/4-Inch inside diameter x 1-Inch outside diameter.
  • Compression style nickel plated brass fittings.
  • maximum from the air compressor, up to 4000 sq..
Check Stock

HJYAJZT Misting Cooling System (Newly Designed Atomizing Line) 50FT(15m) Atomization Line+ 14 Brass Spray Nozzles + One Brass Adapter (3/4 Inch) Patio Spray System for Outdoor Cooling

  • {Newly Designed New Generation Atomization Line} This atomization cooling system is more durable. High hardness. Strong pressure resistance. Long service life. It will not affect your experience due to leakage..
  • {Brass Fittings}The nozzles of our outdoor atomizing cooling systems are made of precision brass with a small diameter and produce a very fine mist. Don't worry about our Mr. Water getting you wet, our mist cooling cools the surrounding area. Cool to 50-68°F..
  • {Water Saving And No Electricity Consumption}This water mister system is more water saving than manual watering. And it can be directly sprayed with tap water for cooling without consuming electricity. It is recommended that the tap water pressure can reach 45psi. The atomization effect will be good..
  • {Easy To Install} The mist cooling system is pre-assembled. So you just need to connect it to the tap and use it on patios, gardens, trampolines, patios, backyards, agriculture, gardens, greenhouses.keep pets cool.while keeping greenery alive..
  • {After Sales Service}If you have any questions about the product, we provide 24-hour online customer service. And provide 100% satisfied customer service. You are also welcome to email us for product improvement suggestions..
Check Stock

IBC Tote Fittings, IBC Tote Adapter, 1/2' IBC Tote Tank Adapter Winterizing with 2' Coarse Thread for 275-330 Gallon, Leakproof Garden Hose Faucet Connector Replace Valve Set with Brass Spigot

  • Applicable Model – Entrance 60cm thick thread (conventional tonnage barrel DN40/50 ball valve butterfly valve outlet size). The outlet 6-point pipeline of the water tank adapter can be connected to conventional PPR, PVC, metal pipe valves, etc. Accepts standard 1/2″ (13mm) garden hose with snap-on hose fittings.
  • Replacement Ton Barrels Faucet – Replace the new water tank adapter in time to protect the life of your existing valve or for fine flow control. This is a good way to stop beating the knuckles on the tank cage and allows you to draw water off a tank with ease, the tap also acts as useful back up safety valve.
  • Wide Applicable – Suitable for IBC containers/ton buckets, garden hoses, watering equipment, pressure washers, RVs, campers, boats, faucets, lawn sprinklers, can withstand agricultural water, reverse osmosis, ink, paint, etc. liquids, coatings, waste water, etc.
Check Stock

Mudder Bpv31 Piercing Valve 134a Kit R134a Refrigerant Charge Hose with Gauge, Hose Refrigerant Can Tap with Gauge R134a Can Connect to R12/r22 Port Ac 1/2 and Universal Retrofit Valve with Dust Cap

  • ...ce area for installation and use, and you only need 1 hex key wrench (included) to install the kit.
  • If you want to attach the gauge with BPV piercing tap valve, you need a retrofit valve (included).
  • R134a Charging hose: 19 inch hose with R-134a can to R-12/R-22 service port connection, 1/2 inch end fits R12, 22, 502 fittings.
  • And the gauge has scale readings for R134, R12, and 22. 90-degree push and lock coupler with auto shut off.
  • Replace model of BPV-31 piercing tap valve: AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31.
  • Compatible with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes.
  • Universal retrofit valve: the retrofit valve converts from R-12 to R-134a air conditioning system and suit for 7/16 inch low side port.
  • Suit for vehicles pre-1994, comes with R-134a refill fittings.
Check Stock

Boltigen R134A Self Sealing Can Tap Valve Refrigerant Dispenser Tool with Tank Adapter for 1/4 and 1/2-inch AC Freon Charging Hose (1/2 Self Sealing)

  • 【R134A SELF-SEALING CAN TAP 】 Our R134a self sealing can tap valve fits for 12oz R134a self-sealing cans and designs with hand operated valve control.this 134A self sealing can tap can only be used for self-sealing cans with 1/2'' ACME thread, either cannot be used on puncture style cans..
  • 【WIDE COMPATIBILITY】Our r134a self sealing can tap fits self sealing R134a containers(such as 12oz Self-Sealing Container) with ACME threads to directly connect 1/4" SAE (R12 R22) female fitting AC charging hose .Come with R134A can tap refrigerant dispenser and tank adapter, compatible with both 1/4" and 1/2" female fittings ac charging hose..
  • 【TANK ADAPTER】Our R134A car air conditioning tank adapter comes with 1/4" SAE female x 1/2" ACME male flare, connects to R134A manifold..
  • 【PREMIUM QUALITY】Round smooth handle for easy operation. Our R134A refrigerant self-sealing can tap with adapter is made of heavy duty brass to last under extreme conditions for durable using, with screw-on design and safety check valve, even working under extreme conditions, features with long-lasting seals to prevent leaking..
Check Stock

Water Booster AC Pressure Pump 110V, Self Priming Upgrade Pump 5.5 Gpm 70 Psi with Power Plug, Pipe Fittings Brass Connector Strainer Filter for Kitchen Bathroom RV Marine Yacht, Garden Hose

  • Tip: To avoid leakage to the pump rotor in case of some product failure, the correct operation is to put the pump head down or flat during installation.
  • Smart Start-stop Switch: built in automatic pressure switch which turns it on immediately when the faucet on.
  • Equippend with industry standard fittings, power plug and galvanized anti-rust mounting base to directly replace similar common water pressure pump.
  • Wide Application: great for use in kitchen, bathroom, camping and hunting.
  • It is also a great partner of camper, sprayer, garden sprinklers, fertilizers, sprinkler faucet and agricultural irrigation as you like.
  • Please connect all parts closely to avoid leakage or combine seal tape with pump strainer to better prevent leaks on pipes and plumbing.
  • Why You Choose Us: quality home and industrial facility should be available to everyone.
  • You'll get 1 x AC diaphragm water pump, 1 x 1/2 inch twist-on water strainer (includes 50 mesh stainless steel screen), 2 x hose fittings, 2 x brass fittings, 1 x user manual, 1 x box container.
Check Stock

Gas Flex 3/4 GAS Tubing Pipe KIT 33 Ft with 2 Fittings GasFlex Natural GAS Propane

  • FLEXIBLE ALUMINUM PIPE WITH INSIDE AND OUTSIDE PE COVER.
  • 3/4" Nominal Pipe size: 16mm ID x 20mm OD (0.625" ID x 0.787" OD).
  • CAPACITY: 220,000 BTUH FOR LPG APPLIANCES : 200,000 BTUH FOR NATURAL GAS APPLIANCES.
  • KIT arrives with the brass connectors hand tightened for ease of installation.
  • Comes with 2 fittings , the fittings are MALE NPT 3/4" both ends.
Check Stock