Best Working Current

Stylemafia Max 300A Continuous Duty Solenoid Relay Nickel-Plating for Golf Carts, Winch, Marine in Rush 12VDC

  • Resistance is 14Ω, Capacity is 10.2W, Contacts:Normally Open (NO)/ 12VDC WITH 2 COPPER POINT.
  • Replaces:70-111224,3635820, 1114208, 1114218, 1114223, 1114534, 1114547/ Bracket:Straight.
  • Spst, One circuit: Off - On, Bracket mounting:Holes 5/16 x 19/32 2-13/64 on center.
  • Our Coil Roll is using 180℃ copper wire, Cover is Nickel-Plating, Meet Environmental Plating Requirment, And Avoid Rusting, Shining.
  • Max Transient current can be 300A, but Continuous Working Current recommend under 150 Amp/ WARRANTY: Life Long Warranty and Free Return and Full Refund.
  • Note: Normally Make 80A as Working Current, Need Break 5 sec on, 50 min off.
Check Stock

MELIFE JSN-SR04T Integrated Ultrasonic Module Distance Measuring Transducer Waterproof Sensor Module for Arduino

  • Come with a waterproof sealed emitter. This sensor is suitable for outdoor applications such as car reversing sensors, security alarms, industrial inspection, etc..
  • Integrated with wire enclosed waterproof probe, suitable for wet, harsh measurement occasions. Please note that the device is waterproof, but it couldn't work underwater..
  • Working voltage: DC 5V, Static current:5mA, Total current work: 30mA. Working range: 25cm-4M, Working frequency: 40KHZ, Detecting angle: 70 degree..
  • The module has a variety of modes that can be modified manually, suitable for testing and teaching experiments in different occasions..
  • Widely Application: Horizontal distance messurement, Obstacle avoidance, automatic control, Traffic control, Security, industrial control..
Check Stock

HiLetgo 2pcs JSN-SR04T Integrated Ultrasonic Module Distance Measuring Transducer Sensor Waterproof for Arduino

  • With a waterproof sealed emitter. This sensor is suitable for outdoor applications such as car reversing sensors, security alarms, industrial inspection, etc..
  • Integrated with wire enclosed waterproof probe, suitable for wet, harsh measurement occasions. Please note that the device is waterproof, but it couldn't work underwater..
  • Working voltage:DC 5V, Static current:5mA, Total current work: 30mA. Working range: 25cm-4M, Working frequency: 40KHZ, Detecting angle: 70 degree..
  • The module has a variety of modes that can be modified manually, suitable for testing and teaching experiments in different occasions..
  • Application: Horizontal distance messurement,Obstacle avoidance, automatic control, Traffic control, Security, industrial control..
Check Stock

INA219 High Side DC Current Sensor Breakout - 26V ±3.2A Max

  • 【Mini Split Base Current Transformer】It's the smallest one compared to the similar products (output 100MA).Current Transformer, 100A 100mA AC Current Sensor, Split Core Amp Transformer Sensing Relay, Mini Clip-on Easy to Install CT Without Power Off. current sensor structure sensor.
  • 【Professional Use】Current transducer used for energy meter in special.
  • AC 220v, 380v power supply can both be applied.plit Core Current Transformer,AC Current Sensor,Output Class Analog Sensor,Working Principle Magnetic Sensor, Useful for Measuring Whole Building Electricity Consumption.current sensing relay isolation.
  • 【Good Mechanical Properties】Fully enclosed, good mechanical properties and environmental resistance, strong voltage isolation capability, safety and reliability..
  • 【Snap Joint Structure】The diameter of inner hole is 16mm, the accuracy is 0.5 grade, Using snap joint structure, it can be fixed to the cable directly through nylon ties..
  • 【Easy to use】When you fix the energy meter, you don't need to cut off the power if you use this product. Split Core Current Transformer Coil Sensor for 100A Amp Energy Meter.ac transformer amp meter amp tester.
Check Stock

Motor Controller, DROK PWM DC Motor Speed Controller 10-50V 60A High Power HHO RC Driver PWM Controller Module 12V 24V 48V 3000W Extension Cord with Switch

  • Parameter: DROK DC motor controller operating voltage range is DC 10-50V, max rated current is 60A, control power range is 0.01-3000W, working temperature range of -20℃-40℃..
  • High-end Configuration: Our motor driver control board uses PWM modulation system to adjust light & speed. In addition, it is designed with radiators to doing heat dissipation created by MOS tube..
  • Convenient Speed Control: With wires to connect potentiometer and regulation switch to control the speed, it is convenient to use..
  • Low Quiescent Current: our speed regulation module is designed with low quiescent current 0.04A(When the working voltage is DC10V-50V, the quiescent current cannot exceed 40mA)..
  • Wide Application: our motor driver control board can be applied to universal DC brush motor speed regulation.
  • production line conveyor belt speed regulation.
Check Stock

Smarkey 9 Volt USB Car Adapter for Medela Pump-in-Style Advanced Breast Pump Replaces Part # 67174 or 920.7010 9207010（Easy to Carry When Travel）

  • Support Medela Pump In Style Advance （920.7010 9207010） Charging from Power Bank or car adapter or any 5V Power Supply.
  • Connectors: DC jack 5.5mm to USB A male. Only for 5V to 9V and no switch but more stable working. (Pumps cannot work if your car USB port current .
  • Easy to use: Plug and play. Brief and beautiful outlook, small volume easy to carry when travel. Lower heat and long working time.
  • Can support Lansinoh Smartpump Double Electric Breast Pump and Lansinoh Signature Pro Double Electric Breast Pump working and replace Lansinoh 9V Portable Car Adapter #53475.
  • Can Support Evenflo Deluxe Advanced Double Electric Breast Pump working.
Check Stock

Battery Charger 24V 30A Fast Smart Golf Cart Battery Charger Fully-Automatic Electric Pallet Jack & Forklift & Club Car Charger with Temp. Control, LCD Display, Cooling Fan, 3 Protection System 110V

  • ...ally after it is fully charged, the fully charged indicator will light up to remind you..
  • 【Smart Temperature Control Forklift Battery Charger】The inside of 24v forklift battery charger adopts intelligent temperature control technology,which can automatically adjust the working temperature of pallet jack charger to ensure the normal operation of pallet jack battery charger. When the battery is about to be fully charged, 24v intelligent forklift battery charger will automatically convert the high current into the small current for charging, which can protect your battery from damage..
  • 【Built-in Cooling Fan of Club Car Battery Charger】The working current of the golf cart charger is large when it is running. Since natural ventilation cannot meet the cooling requirements of the 24 volt golf cart battery charger, the golf cart battery charger is equipped with a cooling fan to effectively cool the 24v club car charger and make it work smoothly. Maintaining good ventilation can make the club car charger work better and ensure a longer service life of club car battery charger..
  • 【Overvoltage/Overcurrent/Overheating Protecti....
Check Stock

2pcs JSN-SR04T Integrated Ultrasonic Module, MELIFE 5V Distance Measuring Transducer Waterproof Sensor Module with 2.5M Cable for Arduino

  • Come with a waterproof sealed emitter. This sensor is suitable for outdoor applications such as car reversing sensors, security alarms, industrial inspection, etc..
  • Integrated with wire enclosed waterproof probe, suitable for wet, harsh measurement occasions. Please note that the device is waterproof, but it couldn't work underwater..
  • Working voltage: DC 5V, Static current:5mA, Total current work: 30mA. Working range: 25cm-4M, Working frequency: 40KHZ, Detecting angle: 70 degree..
  • The module has a variety of modes that can be modified manually, suitable for testing and teaching experiments in different occasions..
  • Widely Application: Horizontal distance messurement, Obstacle avoidance, automatic control, Traffic control, Security, industrial control..
Check Stock

Mist Maker 10 Head Ultrasonic Mist Maker Fogger Mister Air Humidifier Fog Machine with Waterproof Power Supply for Gardening Pond Pool Rockery Balcony Landscape

  • ❅【10 Heads Mist Maker Fogger】The ultrasonic mist maker with waterproof power supply, 10 spray heads. The spray volume can be up to 5000ml/H. 304 stainless steel shell.
  • Power Supply: 110V, Working voltage: DC48V.
  • Water temperature: 5-50°C (the normal temperature is 30°C). Suitable for all kinds of water, with pure water, tap water, electrolyzed water..
  • ❅【High Quality】The pond fog sprayer is made of 304 stainless steel, which has high strength, corrosion resistance, good durability, can prevent scale, has high thermal conductivity.
  • the built-in copper plate radiator has a better heat dissipation effect. With 110V waterproof power supply, suitable for a dry or humid environment (not be placed directly in the water), and it will not be damaged due to the generation of fog, longer service life..
  • ❅【Safety Use】10 spray heads are designed with independent lines and will not affect each other. The surface of the mist maker is equipped with a power-off sensor, which has high sensitivity, will automatically power off when lack of water..
  • ❅【Automatic Current Regulation】The machine current voltage and temperature by less....
Check Stock