Best Current Ransformer

Current Transducer, SZT15-CH-420E Current Transducer Transmitter Transformer Sensor AC Current Converter 0-50A,Stable Performance

【DC Current Output Signal】 - The SZT15-CH-420E AC current transducer provides real-time isolated measurement of AC current in the grid or circuit and converts it to a 0-5V / 0-10V or 4-20mA DC current output signal ..
【Withstand Voltage】 - Through-heart structure design, insulation withstand voltage up to 2000V AC. The measured current AC: 0-10A / 20A / 50A can be selected..
【Usage】 - Magnetic hysteresis less than 1%, can be used in strong magnetic field conditions. The current transducer is used for AC current monitoring, detection, current overload protection, and is also used as an electronic switch for automatic control systems..
【High Performance】 - The outer casing is made of self-extinguishing material, it has the characteristics of strong overload ability, high precision, high isolation, high security, low power consumption and strong anti-interference ability..
【Easy To Installation】 - There is no need to connect the dc series into the circuit during measurement, safe isolation of input and output. It is suitable for various applications requiring current and voltage conversion..

Check Stock

MakerHawk Electronic Load Tester - USB Load Tester 150W 200V 20A Resistor Adjustable Constant Current Battery Capacity Tester Module Intelligent Dischar

Prevent burning warning: when the input voltage battery and large power test, access must be beforeusing two current adjustment knob counterclockwise to the minimum to zero, then the access, accordingto the priority according to current power to slowly adjust current knob, must not instantly transferred infull, so there are excessive instantaneous power load discharge tube burnt huge risk! Please use thespecial attention to this point, thank you!.
Two power supply methods: 1. DC6-12V DC5.0 power supply.
2. DC6-12V Micro USB power supply.The body discharge power cannot exceed 150W, otherwise there is a risk of burnout..
Voltage measurement range: 0.00V ~ 200V, Current measurement range: 0.00A ~ 20A..
How to operate: Set the capacity, power, time using the Keystrokes method Reset:1. Reset button Long all data (mAh, Klitschko, 00: 00: 00).
2. Fast button twice capacity reset (mAh).
4. Fast button Four time reset (00:00:00).
5. Fast button five settings auto standby, Discharge count down regularly.
6. No load output No load, fast seven key, And current zero zero current, Environmental temperature Accurate calibration..
150W power refers to: In accordance with the power calculation formula P = UI (power = voltage x curre....

Check Stock

MakerHawk Electronic Load Tester USB Load Tester 150W 200V 20A Resistor Adjustable Constant Current Battery Capacity Tester Module Intelligent Discharge Resistance Power Tester

Prevent burning warning: when the input voltage battery and large power test, access must be beforeusing two current adjustment knob counterclockwise to the minimum to zero, then the access, accordingto the priority according to current power to slowly adjust current knob, must not instantly transferred infull, so there are excessive instantaneous power load discharge tube burnt huge risk! Please use thespecial attention to this point, thank you!.
Two power supply methods: 1. DC6-12V DC5.0 power supply.
2. DC6-12V Micro USB power supply.The body discharge power cannot exceed 150W, otherwise there is a risk of burnout..
Voltage measurement range: 0.00V ~ 200V, Current measurement range: 0.00A ~ 20A..
How to operate: Set the capacity, power, time using the Keystrokes method Reset:1. Reset button Long all data (mAh, Klitschko, 00: 00: 00).
2. Fast button twice capacity reset (mAh).
4. Fast button Four time reset (00:00:00).
5. Fast button five settings auto standby, Discharge count down regularly.
6. No load output No load, fast seven key, And current zero zero current, Environmental temperature Accurate calibration..
150W power refers to: In accordance with the power calculation formula P = UI (power = voltage x curre....

Check Stock

Digilent Pmod ISNS20: 20A Current Sensor

【FUNCTION】Adjustable DC current induction switch is a switch output detection, monitoring and protection product developed by using advanced non-sourced power supply (only for alternating current) technology.
【IDEAL CHOICE】Compared with the traditional transformer and thermal protector, the current induction switch has the advantages of high accuracy, stable performance and long service life, it is an ideal choice for automatic industrial control equipment and power monitoring.
【APPLICATION】Widely used in substations, variable frequency speed regulation devices, frequency converter devices, electrolytic plating, electric locomotives, street lamp monitoring, coal mines and other automation industries that require current monitoring.
【PRINCIPLE】The current induction switch uses the principle of electromagnetic mutual inductance of current for safety, introduction, and convenience to monitor or detect the current of electrical equipment.
【TWO TYPES】The switch type is normally open and normally closed, you can choose the appropriate product according to your needs, the startup time is less than 0.1 seconds. The shell material is fireproof ABS, which is safer to use.

Check Stock

Efest 4213 LUC V6 LCD 6 Bay Multi-functional Charger

With 6 charging slots, compatible with and identifies Li-ion (10440, 14500, 14650, 16340, 16650, 17650, 17670, 17350, 18350, 18490, 18500, 18650, 26500, 26650) -Each slot has an independent monitoring and charging current function.
High quality LCD display Screen to display battery charging status..
With two optional charging modes (0.68A or 2A) that is easily changed using the Multi-function Button.
Charge up to 6 batteries using the 0.68A charging mode.Only Slot 3 and Slot 4 can charge at 2.0A.
The single slot maximum charging current is 2A, the maximum total charging current is 4A.
Features over-current, over-voltage, short-circuit, and reverse polarity protectionDescriptionWith 6 charging slots, compatible with and identifies Li-ion (10440, 14500, 14650, 16340, 16650, 17650, 17670, 17350, 18350, 18490, 18500, 18650, 26500, 26650). Each slot has an independent monitoring and charging current function.High quality LCD display Screen to display battery charging status. With two optional charging modes (0.68A or 2A) that is easily changed using the Multi-function Button .Charge up to 6 batteries using the 0.68A charging mode.Only Slot 3 and Slot 4 can charge at 2.0A .The single slot maximum charging current is 2A, the maximum total charging current is 4A.....

Check Stock

Raguso AC Current Transducer, Small Compact Simple Installation AC Current Transmitter Widely Applicable for Home for Industry for Indoor

High-quality material: The AC current transmitter is made of high-quality ABS material, which is strong and durable..
High accuracy: professional design of transmitter and receiver modules, mutual inductance current monitoring, high current detection accuracy, safe isolation of input and output..
Self-powered: The current sensor clip is self-powered, no external power supply is required, and it is easy to use..
Withstand voltage: The current sensor relay adopts a straight-through structure design, and the isolation withstand voltage is up to 2000V..
Application: AC current sensor is suitable for AC current measurement and monitoring, AC motor overload protection, electronic switch of automatic control system, etc..

Check Stock

DC Current Switch,Current Sensing Relay DC Current Sensing Switch 0-300A Amp Sensor Monitoring Relay D366

Basic Function:When the piercing current exceeds the set value, the output switch will act Automatically reset when the piercing current is less than the set value..
Set threshold: set the threshold when the perforation current exceeds the threshold, the relay will work, and when the perforation current is lower than the threshold, the relay will reset.
Indicator light: the indicator light is off when there is no current, the green light is on when the current is lower than the threshold, and the red light is on when the current is higher than the threshold.
Delay adjustment: power-off delay can be set from 0 to 99 seconds, clockwise to increase and counter-clockwise to decrease.
Detection range: 0-50A, [email protected] AC/DC contact capacity.

Check Stock

CENTAURUS SCT-013-000 Split Core Current Transformer Sensor Non-invasive SCT013000 AC Current Split Core Transformer Sensor SCT-013-000 100A/50mA

【OPTIMAL PERFORMANCE】CENTAURUS premium upgrade SCT-013-000 Current Transformer Sensor is used for current measuring, monitoring and protection of AC motors, lighting equipment, air compressors, etc..
【HIGH QUALITY】CENTAURUS premium SCT-013-000 AC Current Transformer Sensor is made of high quality Ferrite material which can use for a long time.This split core current transformer is particularly suitable for DIY use and it works well with arduino and raspberry pi..
【MAIN SPECIFICATION】Opening size: 13mm×13mm, fully compatible with most similar products.
The lead length is 1.5 meters, the standard Φ3.5 three-core plug output..
【OPTIMAL RELIABILITY】CENTAURUS SCT-013-000 AC Current Transformer Sensor has two forms of output current, voltage (voltage output built-in the sampling resistor).Non-linearity ±3% (10%～120% rated input current)..
【PACKAGE & SERVICE】Package Include: 1Pcs x SCT-013-000 Split Core Current Transformer Sensor .Any question Pls fell free to contact us, we will reply you within 24H.And we offer a 12 month warranty..

Check Stock

DUNSI SCT-013-000 Split Core Current Transformer Sensor Non-invasive SCT013000 AC Current Split Core Transformer Sensor SCT-013-000 100A/50mA

【HIGH QUALITY】DUNSI premium SCT-013-000 AC Current Transformer Sensor is made of high quality Ferrite material which can use for a long time.This split core current transformer is particularly suitable for DIY use and it works well with arduino and raspberry pi..
【MAIN SPECIFICATION】Opening size: 13mm×13mm, fully compatible with most similar products.
The lead length is 1.5 meters, the standard Φ3.5 three-core plug output..
【OPTIMAL PERFORMANCE】DUNSI premium upgrade SCT-013-000 Current Transformer Sensor is used for current measuring, monitoring and protection of AC motors, lighting equipment, air compressors, etc..
【OPTIMAL RELIABILITY】DUNSI SCT-013-000 AC Current Transformer Sensor has two forms of output current, voltage (voltage output built-in the sampling resistor).Non-linearity ±3% (10%～120% rated input current)..
【PACKAGE & SERVICE】Package Include: 1Pcs x SCT-013-000 Split Core Current Transformer Sensor .Any question Pls fell free to contact us, we will reply you within 24H.And we offer a 12 month warranty..

Check Stock