Best Welding Rod welding Wires

25 Rods Aluminum Welding Rods, Aluminum Brazing Rods for Propane Torch, Aluminum Soldering Rods for Alu, Alu Alloy, Aluminum Repair, 1/16″ X 9.84″

MATERIAL: 21 Rods 1/16″ x 9.84″ aluminum brazing rods are included in the package. The chemical composition of the brazing rods: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%..
ADVANTAGES: Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile Strength ( RM): 130N/mm². The aluminum soldering rods has good fluidity during welding, strong caulking, and can flow into small spaces..
PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can be opened for easy storage and use..
APPLICATION: Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve y....

Check Stock

Forney 30810 Welding Rod, 1/8-Inch

All position welding, low hydrogen rod for general purpose AC applications requiring low penetration, can also be used on DC+.
Designed for welding head enable steels and projects involving hard to weld steels including thick sections and restrained joints with cracking issues.
Not recommended for use with low open circuit-Voltage OCV power sources.
Excellent for tack welds and out of position welding.
Ideal for general fabrication of cold roll steels.

Check Stock

21 Rods Aluminum Brazing Rod Low Temperature, Aluminum Welding Rods for Propane Torch, Flux Core Welding Wire for Alu, Alu Alloy, Aluminum Repair, 1/16\ X 16.93\ (1.6 mm)

MATERIAL: 21 Rods 1/16" x 16.93" aluminum brazing rods are included in the package. The chemical composition of the brazing rods: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%..
ADVANTAGES: Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile Strength ( RM): 130N/mm². The aluminum soldering rods has good fluidity during welding, strong caulking, and can flow into small spaces..
PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can be opened for easy storage and use..
APPLICATION: Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve you ....

Check Stock

Forney 32005 E7014 Welding Rod, 3/32-Inch, 5-Pound

All position welding rod with digging arc, deep penetration on dirty, rusty and painted materials.
Ideal for joints requiring deep penetration such as square edge butt welds, good for vertical and overhead welding with light slag.
Excellent for galvanized steel and rusty/oily steel in maintenance or repair applications, plus pipe welding.

Check Stock

Makita PR00000034 1-3/8\ Welding Nozzle

WELDING NOZZLE SUPPORT: PVC floor round welding nozzle with wheels, can be used with welding wire, with rollers to guide the welding seam straighter..
WELDING NOZZLE WITH WHEEL: The welding nozzle with wheel can be directly fixed on the hot air gun. When there is a wheel, the wheel can be directly attached to the gap, and the gap can be filled evenly along the line of the gap, which can solve the manual filling of the weld. The filling is not straight..
WELDING ROD SPECIFICATIONS: Hot Air Gun Welding Nozzle can use 3mm/4mm/5mm..
WELDING NOZZLE WITH WHEEL ADAPTER: 8mm inner diameter of the heat gun nozzle, which can be matched with any other welding nozzle with an outer diameter of 8mm..
MATERIAL: 304 stainless steel alloy, with good corrosion resistance and heat resistance, can withstand high temperatures of 800-1000℃, will not rust, oxidize, and deform under high temperature for a long time. It is an ideal accessory for plastic welding..

Check Stock

Forney 30701 E7018 Welding Rod, 3/32-Inch, 1-Pound

All position welding, low hydrogen rod for general purpose AC applications requiring low penetration, can also be used on DC+.
Designed for welding head enable steels and projects involving hard to weld steels including thick sections and restrained joints with cracking issues.
Not recommended for use with low open circuit-Voltage OCV power sources.
Excellent for tack welds and out of position welding.
Ideal for general fabrication of cold roll steels.

Check Stock

106pcs Plastic Welding Rods ABS PP PU PE PA PC TPO 7 Types of Plastic Welder Rods for Car Bumper Kayak Repair Kit with Reinforcing Stainless Steel Mesh Plastic Welding Kit Welding Supplies

PLASTIC WELDING KIT WITH RODS: 106 pieces 12-color plastic welding rods. Includes 7 of the most commonly used plastics-(PP)polypropylene, (PU)polyurethane, (PE)polyethylene, (PC)polycarbonate, (PA)polyamide/nylon, ABS, TPO. Round welding rods are available in 7pcs colors, 8pcs for each color. Flat welding rods are available in 5 colors, 10pcs of each color. The round welding rods are 13 inches long and 1/8 inch in diameter. Flat welding rods measure 9.8 x 0.2 x 0.1inch..
MULTIPLE PLASTIC TYPES: ABS/PP/PU/PE/PA/PC/TPO Various types of plastic repair welding rods that can help you repair car bumpers, kayaks, lawn mowers, plastic Water tanks and more broken plastic parts. Each bundle of plastic welding rods has a corresponding plastic label, which allows you to choose the type of material you need. Please determine the type of plastic you are welding and select the corresponding material, which can better provide a seamless repair for your welding job..
WELDING RODS GOOD PERFORMANCE: The plastic welding rod has good toughness and stable moisture-proof insulation, not easy to wear and aging, suitable for repairing damaged plastic parts made of plastic. Use with the plas....

Check Stock

100PCS-Flux Core Welding Wire for Aluminum,Low Temperature Flux Cored Welding Rod Make Repair Aluminum Radiator,Ideal for Both Beginners And Professionals Alike,752°F(400°C) Melting Point.(13"/1.6mm)

Simplified welding process: Flux-cored rods have a low melting point and do not require solder powder, making them easy to use even for beginners..
High-quality aluminum brazing: The aluminum brazing rods come with flux already included, ensuring a durable and long-lasting bond..
Only for Welding Aluminum - 100Pcs(13"/1.6mm)Flux Core Welding Wire are Suitable for Welding or Surfacing Welding Aluminum, Aluminum Alloy, Aluminum-Magnesium Alloy and Other White Metals,752°F(400°C )Melting Point..
Flux Cored Aluminum Welding Rod Make Repair Aluminum Radiator Easily： Flux Core Welding Wire is Commonly Used for Repairing Aluminum Radiators in Automobiles, Motorcycles, Air Conditioners, and Refrigerators, Making it A Versatile Tool to Have In Your Toolbox..

Check Stock

Silver Brazing Rod BCuP-5 20 Flat Bar Welding Stick JAgP-15 15% Silver Phos Welding Rods 0.050 x1/8 x14 for Air-conditioners Refrigerators and Freezers

Material: The package includes 20PCS 15% Silver Brazing Rods BCuP-3.Silver (Ag) 4.8-5.2%.
Copper (Cu): Rest. For the best results..
Standard: The BCuP-5 silver brazing rod containing 15% silver, is equivalent to the American standard AWS BCuP-5 national standard BCu88PAg and L205. It has certain plasticity and is suitable for welding of copper and its alloy joints that cannot maintain a tight fit. Melting point 645-815 degrees Celsius..
Advantage: The low temperature phosphor silver welding rod is easy to install and remove. Good fluidity during welding, can flow into small space. Low metling point 704-816℃, good fluidity during welding, molten metal can flow to small gaps.
Application：The brass brazing rod is used for brazing of silver & silver alloy in motors, air-conditioners, meters, and refrigeration industry,Widely used in brazing of copper and copper alloys in electrical machinery, electrical appliances, glasses and other industries.
Service: Fox Alloy Time-proven formulation.
A team of experienced welding engineers ready to answer all your welding questions.

Check Stock