Best Viscosity Index Improver

AmScope ML-A-1 Microscope Immersion Oil 1 Oz Type A

Advanced Technosynthese lubricant for High Performance/Protection.
Specifically designed for powerful & recent cars fitted with Gasoline/Diesel engines/naturally aspirated/turbocharged/indirect/direct injection..
Suitable for all types of fuel: leaded/unleaded Gasoline/Ethanol/LPG/Diesel/Biofuel. // Compatible with catalytic converters..
Can be mixed with synthetic/mineral oils..
Viscosity Grade: SAE J 300/5W-30. // Density at 20°C (68°F): ASTM D1298. // Viscosity at 40°C (104°F): ASTM D445/71.2 mm²/s. // Viscosity at 100°C (212°F): ASTM D445/11.8 mm²/s. // Viscosity HTHS at 150°C (302°F): ASTM D4741/3.5 mPa.s. // Viscosity Index: ASTM D2270. // Pour Point: ASTM D97/-38°C/-36°F. // Flash Point: ASTM D92/224°C/435°F. // Sulfated Ash: ASTM D874/1.1% Weight. // TBN: ASTM D2896/10.2 mg KOH/g..

For use in all systems where DEXRON or MERCON standard is required. // For automatic gearboxes/torque converters/power steering systems/boat reversing gears/hydrostatic transmissions/hydraulic or mechanical systems that require DEXRON or MERCON standards..
MOTUL DEXRON III can be used (and mixed) for applications where DEXRON/B DEXRON/DEXRON II D/DEXRON IIE/DEXRON III is required..
Technosynthese ATF features more fluid at low temperature than Dexron IIE oils, which allows easier gear change in cold weather..
Higher oxidation resistance than Dexron IIE standard. // Oil film stability under high temperature. // Anti-wear, Anti-corrosion, Anti-foam..
Color: Red. // Density at 20°C (68°F): ASTM D1298. // Viscosity at 40°C (104°F): ASTM D445/33.4 mm²/s. // Viscosity at 100°C (212°F): ASTM D445/7.2 mm²/s. // Viscosity Index: ASTM D2270. // Flash Point: ASTM D92/204°C/399°F. // Pour Point: ASTM D97/-48°C/-54°F..

Spec. Gravity 1.23 g/cc Mixed Viscosity 175 cP At 25°C, Thixotropic Index 1.0.
Mechanical Properties Hardness, Shore D 86, Pot Life 1.5 hours, Refractive Index 1.51.
Glass Transition Temp (Tg), ultimate 102°C.
cure time 24 hrs At 25°C, 1-2 hrs At 65°C.

Premium: Extremely high quality, hydrotreated vacuum pump oil.
Engineered to maintain viscosity even in extreme temperatures.
Essential: Don't damage your equipment with substitute oils.
Your vacuum extractor depends on regular service and the quality and purity of your vacuum pump oil.
Clean: Used oil contains contaminants like moisture, acids, vapors, and dirt.
Vacuum pump oil should be changed after each use to improve performance and the life of the pump.
Universal: This mechanical lubricant is compatible with pumps made by most manufacturers.
Specifications: 225 Viscosity SUS at 100 degrees Fahrenheit.

Spec. Gravity 1.44 g/cc Mixed Viscosity 27,000 cP After mixing Pot Life 3 hrs solids contents % 100.
Hardness Shore D 78 Adhesive Bond Strength 2100 psi At 25°C Elong at Yield 5 % Color Light Tan.
Volume Resistivity 1.50e+14 ohm-cmDielectric Constant 3.5 At 1000 Hz Thixotropic Index 1.4.
Maxi Service Temp Air 293 °F Min Service Temp Air -76.0 °F CTE linear 26.1 µin/in -°F At Temp 68 °F.
Thixotropic Index 1.2 Cure Time 1.00 - 4.00 hour At 65°C 24.0 hour At 25°C Pot Life 180 min.

FULL SYNTHETIC - No compromise formulation, full synthetic with extremely high-performance metrics. EXTREMELY ECONOMICAL - Lowest cost per hour of operation. Period. MULTI-VISC FORMULATION for wide viscosity range applications..
TRUE ALL-SEASON - Extreme temperature range for arctic cold (-54 F) to hot desert summers. Trouble-free, long duration, flawless hydraulic response, and power transfer..
7,000 -10,000 Hour RATING - Minimum 7,000 hour rating and up to 10,000 operational hours in severe service. ZERO FOAMING - Virtually zero foaming in high-stress environments and extremely rapid air release & air separation. Prevents hydraulic cavitation..
EXTREME THERMAL STABILITY - Highest viscosity index (194) of any commercially available hydraulic oil. Outstanding temperature tolerances and shear stability under high loads. Prevents overheating, blown hoses, over-pressure, and facilitates excellent heat transfer to keep hydraulic systems cool..
CONTAINS 300% ANTI WEAR BOOST - Exceptionally high ZINC levels and corrosion inhibitors to protect expensive pistons and all types of hydraulic pumps..

READY TO USE AIR BRUSH PAINTS - This Air Brush Paint kit comes with 126 airbrush paints.
TRANSFORM YOUR WARPAINTS FOR AIRBRUSH – This airbrush flow improver effectively dilutes your paint thinner.
INNOVATIVE COLOR TRIADS – Choose your triad of airbrush colors for shadow, midtones and highlights.
ACRYLIC MEDIUM FLOW IMPROVER OF CHOICE- Get maximum coats for Warhammer, Star Wars, and D&D models.
NON-TOXIC AND ECO FRIENDLY – This paint airbrush paint kit is non-toxic and safe to use.

Meets or exceeds the specifications requirements for most European, Asian, and US vehicles power steering / servo hydraulic steering systems in modern vehicles.
compatible with all types of seals materials in virtually all power steering systems.
universal top off and complete fill formula.
the green color mixes with any color power steering fluid.
Extremely high viscosity index assures superior control in both exceedingly hot and very cold climates (-50F).
Exceptional oxidation stability assures the fluid will not thicken or foul up with time.
very high heat tolerances without losing viscosity and properties.
contains high-quality elastomers and seal conditioners to maintain seal integrity for at least 150,000 miles.
contains top tier custom built optimized additive pack.
protects all metals including servo/power steering pumps from corrosion and rust.
ultra-rapid aeration and water separation.