Best Higher Viscosity Index

Testor Corp 3527C Non-Toxic Cement w/Applicator 1oz

  • Set includes 1 ounce bottle each of thick (Maxi-Cure TM), medium (Insta-Cure+ TM) and thin (Insta-Cure TM) Cyanoacrylate Glue and Debonder (Un-Cure....
  • Insta-Cure (TM) is the thinnest viscosity CA glue offered by BSI. It has a water-thin viscosity that wicks deep into joints by capillary action and....
  • Insta-Cure+ (TM) is BSI’s medium or higher viscosity CA glue used for loose fitting joints or filling small gaps.
  • Maxi-Cure (TM) is BSI’s thickest viscosity CA glue and is the best CA for most plastics, making it the perfect choice for plastic model assembly.
  • INSTA-SET (TM) is a catalyst which acts as an accelerator that allows CAs to fully cure in 6-8 seconds. INSTA-SET (TM) is formulated with a strawberry....
Check Stock

LET'S RESIN UV Resin with Light,Upgraded 200g Crystal Clear&Low Odor UV Resin Kit,UV Light,Silicone Mat,Ultraviolet Epoxy Resin Hard,UV Resin Starter Kit for Jewelry,Craft Decor

  • ..., which can fully Irradiate your crafts. Press once, it turns off after 60s, long press for 3s, and turns off after 120s. We are also equipped with mixing tools and a silicone mat. They can help you keep the desktop clean during operation, and can mix a variety of colors to create more unique UV resin works..
  • High Viscosity: LET'S RESIN well-tailored UV resin kit formulation and perfect photoinitiator ratio to help you achieve the best curing effect during production. And add acrylic adhesive,so that clear UV resin has high adhesiveness,viscosity up to 3700mpa·s,can bond various materials,such as glass decoration,crystal crafts,can also use UV glue to draw 3D paintings,use Make bubble texture on the tumbler cup,resin UV provides you with more creative space to create beautiful and dazzling works!.
  • Crystal Clear&Anti-yellowing: LET'S RESIN UV resin hard is added with antioxidants. The refractive index material is more than 1.5times higher, making the finished work more transparent and yellow-resistant than other UV epoxy resin. Apply without leaving traces, suitable for any light-transmitting material. The UV Resin is also great for making vaults, seals, and tiny delicate landscape DIY work like ocean waves, water splashes, wine more astonishin....
Check Stock

AA-Bond FDA22 FDA Medical Grade Epoxy Adhesive Two Part Room Temp Cure 5gm kit

  • Spec. Gravity 1.44 g/cc Mixed Viscosity 27,000 cP After mixing Pot Life 3 hrs solids contents % 100.
  • Hardness Shore D 78 Adhesive Bond Strength 2100 psi At 25°C Elong at Yield 5 % Color Light Tan.
  • Volume Resistivity 1.50e+14 ohm-cmDielectric Constant 3.5 At 1000 Hz Thixotropic Index 1.4.
  • Maxi Service Temp Air 293 °F Min Service Temp Air -76.0 °F CTE linear 26.1 µin/in -°F At Temp 68 °F.
  • Thixotropic Index 1.2 Cure Time 1.00 - 4.00 hour At 65°C 24.0 hour At 25°C Pot Life 180 min.
Check Stock

Duragard Arctic Blue Hydraulic Fluid - 5 Gallon Pail

  • FULL SYNTHETIC - No compromise formulation, full synthetic with extremely high-performance metrics. EXTREMELY ECONOMICAL - Lowest cost per hour of operation. Period. MULTI-VISC FORMULATION for wide viscosity range applications..
  • TRUE ALL-SEASON - Extreme temperature range for arctic cold (-54 F) to hot desert summers. Trouble-free, long duration, flawless hydraulic response, and power transfer..
  • 7,000 -10,000 Hour RATING - Minimum 7,000 hour rating and up to 10,000 operational hours in severe service. ZERO FOAMING - Virtually zero foaming in high-stress environments and extremely rapid air release & air separation. Prevents hydraulic cavitation..
  • EXTREME THERMAL STABILITY - Highest viscosity index (194) of any commercially available hydraulic oil. Outstanding temperature tolerances and shear stability under high loads. Prevents overheating, blown hoses, over-pressure, and facilitates excellent heat transfer to keep hydraulic systems cool..
  • CONTAINS 300% ANTI WEAR BOOST - Exceptionally high ZINC levels and corrosion inhibitors to protect expensive pistons and all types of hydraulic pumps..
Check Stock

Quicksilver 20W-50 Full Synthetic Motorcycle Oil – 1 Gallon

  • NO COMPROMISE FORMULATION – Ours is a state-of-the-art formulation, built for performance. Synthetic ester base oils, built-in friction modifiers, and outstanding viscosity stability under high thermal stress and high RPM..
  • HIGHLY OXIDATION STABLE – Protects the engine from oil thickening, high-temperature sludge, and varnish deposits. SHEAR STABLE HIGH VI INDEX – Improver-protects against viscosity breakdown in severe service and racing conditions..
  • VERY HIGH WEAR PROTECTION – Anti-wear agents and built-in friction modifiers effectively protect cam lobes and other highly loaded parts from wear, including chains and clutches. Excellent performance and high wear protection in high temp engines such as the V-TWIN.
  • Exceed FZG Load Stage 12 – ULTRA FAST GEAR CHANGES – Exceptional gear changes and clutch engagement, facilitates rapid gear changes in all conditions..
  • UNIVERSAL FORMULATION – Fits a wide range of small 4T engines – Motorcycles, scooters, off-road dirt bikes, etc. FULL WARRANTY – Meets and exceeds all Japanese OEM warranty requirements..
Check Stock

TRIAX Synthetic OEM Grade Power Steering Fluid, Universal, Arctic Grade -50 Cold Flow, Fits Most Asian, US, and European Cars, Full Synthetic with Esters, Widest Spec Application (1 Quart)

  • Meets or exceeds the specifications requirements for most European, Asian, and US vehicles power steering / servo hydraulic steering systems in modern vehicles.
  • compatible with all types of seals materials in virtually all power steering systems.
  • universal top off and complete fill formula.
  • the green color mixes with any color power steering fluid.
  • Extremely high viscosity index assures superior control in both exceedingly hot and very cold climates (-50F).
  • Exceptional oxidation stability assures the fluid will not thicken or foul up with time.
  • very high heat tolerances without losing viscosity and properties.
  • contains high-quality elastomers and seal conditioners to maintain seal integrity for at least 150,000 miles.
  • contains top tier custom built optimized additive pack.
  • protects all metals including servo/power steering pumps from corrosion and rust.
  • ultra-rapid aeration and water separation.
Check Stock

Klein Tools 56117 Premium Synthetic Wax Wire and Cable Pulling Lubricant, 1-Quart Squeeze Bottle

  • increased load-bearing capacity, beyond 800-1000% higher than most conventional compressor oils.
  • thick, high durability film strength to prevent metal to metal contact even in high operating temperatures conditions.
  • offers both high temp continuous operation capabilities and arctic grade - 50 F.
  • multi viscosity keeps fluid requirements at a minimum eliminating the need for lower or higher viscosity oils due to temperature range.
  • Works exceptionally well on rotary, vane, screw, and reciprocal air compressors in severe service with high compression temperatures and long operating hours.
  • High purity base oils with top tier detergent pack guaranteed sludge free operation and exceptionally clean equipment.
  • exceptional bearing protection eliminates bearing vibrations and polish.
  • dramatically prolongs component life far beyond ordinary lubricants.
  • Not recommended for breathing air pumping compressors, oxygen compressors, or LPG compressors fitted on natural gas pipelines..
Check Stock

Satellite city CRK-H-SS super solvent 2oz debonder for CA GLUE

  • Set includes 1 ounce bottle each of thick (Maxi-Cure TM), medium (Insta-Cure+ TM) and thin (Insta-Cure TM) Cyanoacrylate Glue and Debonder (Un-Cure TM) and 2 ounce bottle of Accelerator (Insta-Set TM)..
  • Insta-Cure (TM) is the thinnest viscosity CA glue offered by BSI. It has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds..
  • Insta-Cure+ (TM) is BSI’s medium or higher viscosity CA glue used for loose fitting joints or filling small gaps.
  • Maxi-Cure (TM) is BSI’s thickest viscosity CA glue and is the best CA for most plastics, making it the perfect choice for plastic model assembly.
  • INSTA-SET (TM) is a catalyst which acts as an accelerator that allows CAs to fully cure in 6-8 seconds. INSTA-SET (TM) is formulated with a strawberry scent and activates CA without any degrading of the CAs strength. UN-CURE (TM) debonder will soften cured CA to clean up squeeze out, spills or for disassembly..
Check Stock

AeroShell - 33 Airframe Grease 14oz MIL-PRF-23827C

  • Fully synthetic lubricating oil / Extreme temperature range / Resists burnoff / High temp, high-viscosity index formula.
  • Moisture barrier / Rust preventative / Excellent for trigger, slide & actions.
  • Precision needle tip applicator for firearms, fishing reels, knives, etc..
  • Long lasting mil-spec grease for AR 15 rifle building, superior adhesion essential for hot days and high bond strength for long term storage needs.
  • Lubrication performs under extreme pressure and heat to prevent damage.
Check Stock