Best Turning A Spiral On A Lathe

Accusize Industrial Tools 1\ 9 Pieces/Set, Indexable Carbide Turning Tools and Boring Bar, 2988-0001

  • Package includes: you will receive 4 pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
  • Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manu....
Check Stock

Accusize Industrial Tools 1/2 x 1/2 x 4 in. (Width by Height by Oal) Hss+5% M35 Cobalt Lathe Tool Bit, 5095-0032

  • M35 Cobalt (HSS + 5%) square lathe tool bits blank, much harder and more durable than M2 high-speed steel lathe tool bits.
  • Ground for heavy-duty cuts on casting and forgings. It has significantly higher wear resistance than M2 HSS。.
  • You may machine it to turning tools to do any lathe turning operations. The possibilities are infinite..
  • Step turning, taper turning, chamfer turning, contour turning, facing, grooving, parting, cut-off, internal threading, outside threading, boring, knurling, etc..
Check Stock

WenCrew Carbide Tipped Wood Turning Tools Set, 2023 Upgrade Carbide Lathe Tools for Woodturning, Lathe Rougher Finisher Swan Neck Hollowing Tools with Extendable Shafts & Full Size Cutters Inserts

  • ... ” can offer better strength and durability to helps maintain edge persistence, to avoid constant sharpening..
  • ▶▶▶ HIGH STABILITY: High performance stainless steel arbor and aluminum oxide handles increase stability and shock resistance. Better shock resistant wood turning tools will ensure the handle will not loosen when vibrating, which will make you get a good cutting effect in safe operation(Heavy duty wood turning tools for lathe are less likely to roll and move on the tool holder than wood tools).
  • ▶▶▶ SIMPLE OPERATEION : Carbide wood turning tools allow both beginner and experienced turners to quickly start projects by reducing the learning curve associated with traditional turning tools. And our wood lathe tools bring you outstanding results, Ideal for lathe woodworking or DIY enthusiasts.
  • ▶▶▶ FAST HANDLE SWITCHING: Excellent reliable ergonomics grip makes you feel comfortable and light. Adjustable and Extendable handle support freely adjust the length according to your preference. Wood turning tools equipped with tools to adjust and extend the length, easy and flexible to assemble and disassemble....
Check Stock

The Lathe Of Heaven

  • The VINWOX Carbide Turning Tools are designed with ease of use in mind. It is ideal for wood turners of all skill levels and helps ensure success right from the start. The VINWOX Carbide Lathe Tools eliminate the need for sharpening of your turning tools since it features a rotatable cutter head. Start your easy wood turning on your Wood Lathe with VINWOX Carbide Turning tools now.
  • Including One set Replaceable Carbide Tip Insert installed on chisel. Rougher: 11.1x11.1x1.75mm 4 sided Square Shape Carbide Tip. Finisher: 12mm Diameter Round Shape Carbide Tip. Detailer: 28x10mm Diamond shape Carbide Tip. Peach Square Radius: 11.3x11.3x1.75mm with 4 sided 2" Arc Square Radius Carbide Tip. Blade images on product picture are only for Clear Vision..
  • 1/2/3/4 Indexed Carbide tip design always offer sharpest edge for turning and maximum cutting life.
  • Top quality and Long cutting life Guaranteed.
Check Stock

Upgraded Mini Lathe 7\X14\

  • 【GREAT CONSTRUCTION & POWERFUL】- The mini metal lathe is made from high grade iron with a powerful lathe motor:550W. High grade iron construction makes it more sturdy during turning, drilling, threading and cutting processing.Two rails provides smooth and durable moving..
  • 【NEW UPGRADE DESIGN】-This upgrade mini lathe uses metal gear instead a nylon one,increase service life.Adopts aluminum handwheel is more durable than plastic handwheel,and not easy to be damaged.Digital display screen is convenient for you to follow up the processing.Add automatic power-off protection switch to make the operation safer.An extra lamp can help you finish processing in places with insufficient light.We provide one extra gear belt and free 7PCS lathe carbide tool..
  • 【PRECISION DESIGN】-Power metal lathes has large center distance 350mm(13.78") and swing over bed:180mm (7.09"),spindle bore: 21mm(0.82"). A accurate self-centering 3-jaw is supplied,for holding a variety of round or square cylindrical materials stability.The metal lathe features forward and reverse design. The variable speed of MT4 Spindle range 0-2500RPM, two speeds are available for meet your different metal workings: Low Speed 0-1250RPM, High Speed 100-2250 RPM..
Check Stock

FJL FORCE Lathe Tools Set of 4, Mirror Polishing Wood Lathe Tools Latest Version Carbide Lathe Tools, Carbide Turning Tools, with Diamond Round Square Carbide Inserts

  • 【PRODUTCS INCLUDE】 - Carbide lathe tools including:(1)11" handle(2)7.9" wood turning tools including square,round,diamond,rounded(3)easy to replace the cutting head of the T15 wrench,all parts are made of special hard sponge full fit wrapped and placed in a packaging box..
  • 【REFUSE TO LOOSEN】 - Some common wooden handle carbide lathe tools will feel a certain degree of looseness or even fall off at the connection between the handle and the tool bar after 25 to 30 days of use.In contrast,the high-quality aluminum alloy handle,stainless steel handle all-metal material,double insurance carbide turning tools fixing structure can free you from the worry of product sturdiness in full..
  • 【HIGH CUTTING EFFICIENCY】 - The sharp high-density tungsten lathe tools cutting edge allows you to confront the wood as if a hot knife cutting butter as simple and smooth,compared with other typical carbon and high-speed steel material cutting head more durable,if wood turning tools becomes dull,just use the included T15 wrench to change the blade direction,you will have a fresh,clean cutting edge again..
  • 【EASY TO CONTROL】 - Whether it is the frosted aluminum handle of the wood lathe ,or the high- speed steel material of the knife shank,the mirror polished f....
Check Stock

Woodturning Carbide Lathe Tools 17” Full Size Wood Turning Tool Set of 3 Rougher Detailer Finisher Includes Replacement Cutter Inserts 6 pcs – Diamond Round and Square Screws and Key Star Wrenches

  • ✅ CARBIDE WOODTURNING TOOLS - Our lathe turning tools has greatly simplified wood turning, This set of carbide lathe tools is ideal for turners at any skill level, making woodturning fast and more enjoyable. Each lathe chisel features a carbide tip with multiple sharp edges that can be rotated several times, Just rotate the cutter head ¼ turn for a clean, sharp edge and you are back to turning wood..
  • ✅ CARBIDE TURNING TOOLS SET - Premium quality CNC machined from ½” square stainless steel, making them stronger, stiffer and less likely to roll than round shaft tools. Features a square shaft so the flat back can be kept flat on the tool rest and level with the floor.
  • ✅ ERGONOMICS TOOL HANDLE - Hard and Solid beech wood，Ergonomics design makes it more comfortable while doing turning job. Unlike the aluminum handle wood turning tool on the market which comes with only one handle, which means you have to change out the bar every time you want to switch tools..
  • ✅ WOODTURNING TOOLS & ACCESSORIES - Set includes 3 turning tools : rougher tip – Square 15 x 15 x 2.5mm R50, detailer tip – Diamond 10x28m with Radius point , finisher, with extra sets of carbide inserts. Set comes with extra replaceable carbide insert: 3 Sets of indexable Re....
Check Stock

Indexable Lathe Turning Tool,16mm Shank 7 Pieces Carbide Turning Tool Set,Mental Lathe Tools Holder with Portable Case,for Turning Grooving Threading with Tin Coated Carbide Inserts.

  • Package includes: you will receive 4 pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
  • Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manu....
Check Stock

Double Bearing Live Revolving Centers For Lathe Machine- Engineering Tools (2MT- M12 X 1)

  • Quality Precision Double Bearing Live Revolving Centers-Made from Quality Tools Steel.
  • Comes in 2MT with M12 x 1 mounting threads to mount the chuck or drill chuck for long work piece support while turning on the lathe.
  • Chose as per your Lathe machine tailstock 's taper . Perfect for both Wood turning & metal working.
  • Shanks are hardened & precisely ground . The mounting thread spigot has been machined to hold through a spanner to hold it from revolving and tightening the chuck on it..
  • Concentric run out within 10 microns. Recommended for Conventional Lathe Machines Only.
Check Stock