Best Torque Limitor

TAGVIT 3/8 Inch Drive Click Torque Wrench Set, (5-45 ft.-lb./6.8-61.2Nm) Dual Direction Adjustable Torque Wrench with Spark Plug Socket, Extension Bar and Universal Joint for Bicycle Motorcycle Car

  • 【± 3% High Accuracy】The torque range of industrial-grade torque wrench is 5-45 ft.-lb./6.8-61.2Nm, Each torque wrench has been fully calibrated and tested according to DIN ISO 6789, ISO 6789 and ASME B107.14M, and has a separate calibration certificate. Using a torque wrench helps to extend the life of components and prevent damage due to over-tightening..
  • 【High Quality & Durable】The professional 3/8 Inch Drive torque wrench is made of wear-resistant, rust-proof chrome vanadium steel, which is comfortable to hold, non-slip and anti-corrosion. Nm and FT-LB dual scales adopt laser technology, which are clear and easy to read, not easy to wear, and are suitable for most use occasions..
  • 【Dual Direction Torque Wrench】The paddles on the head of the adjustable torque wrench can be used at any time to adjust the direction of use, so that the wrench can be used in both clockwise and counterclockwise directions to meet your different operating needs. Widely used in car spark plug replacement, bicycle and motorcycle maintenance, equipment installation, electrical engineering, product assembly, etc..
Check Stock

TAGVIT Digital Torque Wrench(7.38-147.5 ft-lbs./10-200 Nm), 1/2-Inch Drive Digital Torque Wrench Electronic Torque Wrench with Buzzer and LED Flash Notification for Bike Motorcycle Car Maintenance

  • High Precision: The torque range of the digital torque wrench is 7.38-147.5 ft-lbs./10-200Nm, with four different torque units: Nm, Ft-lb, in.lb, Kgf.cm, which can be quickly switched according to needs. Accuracy is ±2% clockwise and ±3% counterclockwise, in accordance with ISO 6789 and ASME B107.14M, with an official calibration certificate. Use a professionally manufactured 72-tooth ratchet head for greater precision in use and no slippage..
  • TRACK/PEAK Mode: The 1/2 inch drive digital torque wrench has two measurement modes, the TRACK mode can display the real-time torque value, and the PEAK mode can display the maximum torque value during use. The motorcycle torque wrench adopts a large LCD display, which is clear and easy to read. The highly backlit screen makes it easy to use even in dimly lit environments..
  • 10 Preset Modes: By adjusting the M0-M9 mode of the bicycle digital torque wrench , multiple sets of commonly used torque values and upper and lower limit alarm ranges of torque values can be preset (M0 Mode: preset torque value.
  • M1-M9 Mode: preset torque value Upper and lower limits). Ideal for beginners and professionals, it is widely used in bicycles, motorcycles, auto repair and industrial use, etc..
  • Quick Release Button: The quick releas....
Check Stock

Milwaukee MLW246620 Milwaukee M12 FUEL 1/2 in Drive Digitial Torque Wrench w/ONE-KEY

  • Delivers up to 50% Faster Installation by replacing the hand tool or two tool installation process with the POWERSTATE brushless motor and torque wrench in one tool.
  • Precise Torque Accuracy of up to +/-2% CW, +/-3% CCW of full scale for torque critical fasteners.
  • Faster, More Productive Torque Reporting with ONE-KEY providing torque data and customizable reports for inspectors or owners.
  • ONE-KEY technology allows for customization, tracking, tool security, and inventory management.
  • Adjustable run-down torque to control the tools output torque via the motor to prevent over torque.
Check Stock

4554 Torque Gauge 1/2″ Drive

  • OOTCC-4554 Torque Aanglee Gauge 1/2″ Drive-Drive Torque Aanglee Gauges are required when servicing many late model engines that use torque-to-yield fasteners. OOTCC No. 4554 1/2" Drive Torque Aanglee Gauge measures Aanglee of rotation after pre-torque in torque-Aanglee applications. The 360° scale is marked in 2° increments and intervals of 10° and 30°.
  • easily zeroed for next application by turning the tool housing. Has 1/2" male and female square drives. Value is at the CCOREE of the OOTCC.
  • Item Dimensions: 9.1 x 4.25 x 2.15 inches.
Check Stock

Neiko 20743A 3/4”-Inch Digital Torque Adapter, 150-750 ft-lb, Digital Torque Wrench Converter/Torque Wrench Adapter, Alerts Torque Setting, Calibrate Digital and Analog Torque Wrenches

  • TORQUE WRENCH CONVERSION: This digital torque adapter converts any ratchet wrench into a precision torque wrench with a digital gauge and serves as an accurate calibration device for existing digital and analog torque wrenches..
  • METRIC/SAE & BI-DIRECTIONAL: This digital adapter can calculate torque at both metric and SAE units (Ft.-Lb., N-m and kg-m) and bolsters a 3/4-inch drive with socket drive and can measure in both directions, clockwise and counter-clockwise..
  • PEAK AND TRACE MODE: This torque adapter unit provides two types of modes: a peak mode that indicates when a specific level of torque is reached and a trace mode that actively shows how much torque is being applied on the display..
  • NOISE ALERT AT TORQUE SETTING: The audible confirmation is accompanied by a 3 LED light indicator system to give you a progressive audio notification when reaching specified torque ratings/settings and auto shuts off after 80 seconds of idle time..
  • ADAPTER SPECIFICATIONS: Torque range: 150-750 Ft-Lb or 200-1000 N-m.
Check Stock

TEKTON 1/2 Inch Drive Split Beam Torque Wrench (40-250 ft.-lb.) | TRQ62203

  • Includes 1-pc. 1/2 in. drive torque wrench.
  • Product manual with torque conversion chart.
  • Accurate to +-4% throughout the entire 40-250 ft.-lb. torque range.
  • Each torque wrench is serialized and calibrated according to the ASME B107.300-2010 standard and the detailed test results are recorded on the included certificate.
  • A smooth-turning thumbscrew makes it easy to set a precise torque value, while the teeth inside the flip-up cover lock that torque setting in place during use.
  • Unlike other torque wrench designs, this wrench can be stored at any torque setting without losing accuracy.
  • A scale on the body of the wrench allows for quick conversion from foot-pounds to newton-meters.
Check Stock

TEKTON 3/8 Inch Drive Split Beam Torque Wrench (20-100 ft.-lb.) | TRQ62103

  • Includes 1-pc. 3/8 in. drive torque wrench.
  • Product manual with torque conversion chart.
  • Accurate to +-4% throughout the entire 20-100 ft.-lb. torque range.
  • Each torque wrench is serialized and calibrated according to the ASME B107.300-2010 standard and the detailed test results are recorded on the included certificate.
  • A smooth-turning thumbscrew makes it easy to set a precise torque value, while the teeth inside the flip-up cover lock that torque setting in place during use.
  • Unlike other torque wrench designs, this wrench can be stored at any torque setting without losing accuracy.
  • A scale on the body of the wrench allows for quick conversion from foot-pounds to newton-meters.
Check Stock

ARES 43011-1/4-Inch Drive Micrometer Torque Wrench - Dual Torque Scales - 40-200 in/lbs (4.52-22.6Nm) - Click Torque Wrench - Ultra Smooth Torque Dialing with High Visibility Laser Etched Markings

  • ITEM SPECIFICATIONS: The ARES 1/4-Inch Drive Micrometer Torque Wrench features dual torque scales with in/lbs and newton meters readings and ranges of 40-200 in/lbs and 4.52-22.6 Nm with an accuracy tolerance of ±3%. The ultra smooth handle rotation with high visibility laser etched markings makes it easy to adjust your specified torque. Designed with longevity in mind, all of our torque wrenches are calibrated before shipping and meet ANSI standards..
  • DESIGN CONSIDERATIONS: This click type torque wrench is designed with ultra smooth torque dialing, and the quick torque change mechanism features a spring loaded pull down knurled collar that secures the torque setting with a positive lock mechanism. The quick release mechanism helps you dial in your torque setting effortlessly and instantly. The click type design alerts you when torque is reach and helps to prevent over-torquing..
  • CONVENIENT STORAGE: This click type micrometer torque wrench comes with a high quality storage case, so you'll always have the perfect place to keep it while it's not in use, and you'll never have to search for it when you need it. This torque wrench features a black nickel finish on the shaft and ratchet, and a red anodized finish on the aluminum machine knurled handle. The ....
Check Stock

NEIKO 20742A 3/8” Digital Torque Adapter, 14.7-99.6 Ft-Lb, 3/8” Drive Digital Torque Wrench Converter/Torque Wrench Adapter, Alert Signals Torque Setting, Calibrate Digital & Analog Torque Wrench

  • TORQUE WRENCH CONVERSION: This digital torque adapter converts any ratchet wrench into a precision torque wrench with a digital gauge and serves as an accurate calibration device for existing digital and analog torque wrenches..
  • METRIC/SAE & BI-DIRECTIONAL: This digital adapter can calculate torque at both metric and SAE units (Ft.-Lb., N-m and kg-m) and bolsters a 3/8-inch drive with socket drive and can measure in both directions, clockwise and counter-clockwise..
  • PEAK AND TRACE MODE: This torque adapter unit provides two types of modes: a peak mode that indicates when a specific level of torque is reached and a trace mode that actively shows how much torque is being applied on the display..
  • NOISE ALERT AT TORQUE SETTING: The audible confirmation is accompanied by a 3 LED light indicator system to give you a progressive audio notification when reaching specified torque ratings/settings and auto shuts off after 80 seconds of idle time..
  • ADAPTER SPECIFICATIONS: Torque range: 14.7-99.6 Ft-Lb or 27-135 N-m.
Check Stock