Best Toilet Valve And Lever Kit

Danco 80816 Complete Toilet Repair Kit Fill Valve, Flapper, Rod, Float Replacement, White

TOILET REPAIR KIT: The Danco Toilet Repair Kit includes replacement parts for the most common toilet parts that cause a leaky toilet and will restore your toilet to its original working condition..
TOILET FILL VALVE DIMENSIONS: The fill valve height is approximately 8.5 inches from the bottom of inside the tank..
TOILET BALL ROD FLOAT & BALL FLOT DIMENSIONS: The length of the brass rod is 7.75” and the length of the float is 5.5”.
when the brass road is threaded into both the float and threaded into the fill valve, the total length of the rod and float ends up being about 11.75”..
TOILET FLAPPER DIMENSIONS: The toilet flapper is ideal to replace worn-out flappers and is designed to fit 2 in. toilet flush valves..
EASY TO INSTALL: Includes easy to follow installation instructions. Complete this DIY Project with common household tools such as screwdriver and adjustable wrench..
BUILT TO LAST: The durable plastic and rubber constructions provides strength and durability which allows for optimal performance..
SINGLE-FLUSH APPLICATIONS: This toilet repair kit works for standard single-flush applications..
COMPLETE TOILET REPAIR KIT INCLUDES: Universal flapper with adapter, spring, float with rod, and ballcock with refill tube..

Check Stock

Bidet Sprayer for Toilet-2 Pack Handheld Sprayer Kit Adjustable Water Pressure Control Stainless Steel Easy Install for Feminine Hygiene Baby Wash and Pet Shower Sprayer

PREMIUM MATERIALS - The bidet sprayer for toilet consists of 304 stainless steel bidet sprayers, stainless steel hose, not easy to rust and high quality material. Longer service life..
SPECIFICATIONS - Handheld bidet includes 2 bidet sprayers, 4.9ft hose, 7/8" T-valve, hook bracket, rubber o-rings (inside T-valve), 2 screws and 2 anchors, installation instructions . PLEASE NOTE: The water inlet for the toilet tank is 7/8" in diameter..
ADJUSTABLE WATER PRESSURE - Control the water pressure by pressing down on the toilet bidet sprayer. The water pressure is at its maximum when the handle is fully depressed. The second you release the lever, it stops spraying water..
MULTIPLE USES - The hand sprayer can be used as a sanitary sprayer, toilet wash, pet shower, car wash gun, baby shower shower. Gentle pressure mode is available for feminine hygiene cleaning or baby showers and pet baths..
SIMPLE INSTALLATION - The package includes the required installation kit so you don't need to buy anything else. There are two 2 ways to install, it can be hung on the wall. It can also be hung beside the toilet without punching..

Check Stock

Keeney Mfg. Co. Toilet Repair Kit

Complete Package - Contains all the parts needed to completely upgrade toilet while saving up to 38% more water..
Adjustable - Toilet fill valve can be easily adjusted from 8” to 13” to fit most toilets and available with 2” flapper..
Fits American Standard, Kohler and other toilets..
Easy to Install - Detailed step-by-step instructions included with helpful graphics and suggested helpful tools for a successful installation..
Pack Includes: (1) flush valve, (1) tank-to-bowl gasket, (3) 5/16" x 3" corrosion-resistant bolts, (6) corrosion-resistant washers, (6) rubber washers, (3) hex nuts, (3) wing nuts, (1) adjustable fill valve assembly, (1) flexible refill tube with clip, (7) water-saving caps, (1) 2" toilet flapper with chain, (1) flush lever.

Check Stock

Toilet Handle Replacement kit – Front Mount Copper Toilet Tank Flush Trip Lever (2 Packs) All Metal Brass Flusher Toilet Repair Part w/ Zinc Alloy Handle Stainless Steel Flapper Chain & Nut

[Front Mount Copper Toilet Trip Lever] This FRONT MOUNT copper toilet handle lever fits most standard front mount toilet tank with 0.63”-0.81” square hole (about 5/8”-3/4”). Please make sure the original toilet handle or the mounting hole is front of your toilet tank. If your toilet has a 5/8” square hole, please remove the black square rubber ring before installing. (Not for side-mount or angel-mount.).
[Durable All Metal] Made of thickened copper lever & Zinc alloy chrome plated Handle, more corrosion resistant than aluminum alloy lever, more durable than flimsy plastic chrome plated handle. This is a heavy duty toilet handle replacement kit, which is double weight than the aluminum alloy toilet flusher lever and even better than the original toilet tank lever..
[Super Easy to Install] Just screw the nut and finished. With 3 holes at the end of the lever and adjustable flapper chain, you can adjust a suitable length according to your toilet flush system to get the best flush experience..
[3 Layers Chrome Plated] This toilet handle is made of zinc alloy with 3 layers chrome plated, which can resists scratching, fading & tarnishing. One-piece thicken metal design to prevent breakage. What’s more, the durable quality & elegant design will com....

Check Stock

BARROCK Handheld Bidet Sprayer for Toilet, Stainless Steel Metal Made Baby Cloth Diaper Spraying Kit, Bathroom Toilet Bidet Attachment Set for Bathing Pets and Feminine Hygiene, Brushed Brass Gold

...ium Handheld Bidet Set=Worth It】 BARROCK handheld bidet sprayer sets are made of high quality materials to ensure durable and long-lasting: All metal stainless steel bidet sprayer and holder,explosion-proof stainless steel bidet hose, solid brass 7/8" T-valve(please make sure the water inlet diameter of your toilet tank is 7 / 8 inch before purchase the toilet bidet set).
Superior anti-fingerprint brushed nickel finish for rust-proof, anti-corrosion and is easier to clean and maintain.
【Adjustable Water Pressure-Your Good Helper】 Press bidet lever to control water pressure from soft spray to jet spray: Press lever gently to get gentle spray to do personal cleaning or bathing pets.
Press lever deepest to get jet spray to washing baby cloth diaper,cleaning bathroom floor or wall, water your flowers, clean your toilet and so on.
It will become your great helper in your life.
【Prevent Leakage Design-Protect Your House】 The high-end solid brass T-valve, the innovative thickened conical washer inside the nylon nut, and the explosion-proof stainless steel bidet hose can protect your house from water flooding. For double protection, the T-valve should always ....

Check Stock

Toilet Tank Gasket Replacement Kit with 3 Sets Brass Hardware Kits and 2 Pcs Gasket Fits Most 2-Inch/2.5-Inch Flush Valve Opening Toilet Tanks.

【Fits 2" flush valve opening】The 2 inch tank to bowl gasket and hardware Kit is universal to fit most 2 inch two-piece toilet,fits most 2-Inch/2.5-Inch flush valve opening toilet tanks..
【Easy to install】Leaking toilet tank? Fixed a leaky tank with this toilet tank repair kit prefect fit and easy to install,even a non-plumber can install it..
【Package】Tank to bowl gasket kit with 3 sets brass hardware kits and 2 Pcs long lasting rubber gasket fits (2 inch +2.5 inch) for fit flush valve opening..
【Quick installation design】The toilet tank gasket replacement kit adopts a quick installation structure,which can be easily installed without crouching.
【1-YEAR WARRANTY & 30-DAY FULL REFUND POLICY】 Our toilet bowl repair kit with a 1-year warranty,contact us if you are not satisfied with this toilet tank gasket kit for any reason,you may return it without any questions asked within 30-days of the purchase date for a full refund of the purchase price..

Check Stock

Toilet Handle Replacement kit - Front Mount Copper Toilet Tank Flush Trip Lever Brass Flusher Arm All Metal Toilet Repair part w/ Zinc Alloy Handle Stainless Steel Flapper Chain & Nut for Kohler, TOTO

[Front Mount Copper Toilet Trip Lever] This FRONT MOUNT copper toilet handle lever fits most standard front mount toilet tank with 0.63''-0.81'' square hole (about 5/8''-3/4''). Please make sure the original toilet handle or the mounting hole is front of your toilet tank. If your toilet has a 5/8'' square hole, please remove the black square rubber ring before installing. (NOT for side-mount or angel-mount.).
[Durable All Metal] Made of thickened copper lever & Zinc alloy chrome plated Handle, more corrosion resistant than aluminum alloy lever, more durable than flimsy plastic chrome plated handle. This is a heavy duty toilet handle replacement kit, which is double weight than the aluminum alloy toilet flusher lever and even better than the original toilet tank lever..
[Super Easy to Install] Just screw the nut and finished. With 3 holes at the end of the lever and adjustable flapper chain, you can adjust a suitable length according to your toilet flush system to get the best flush experience..
[Elegant & Bright, 3 Layers Chrome Plated] This toilet handle is made of zinc alloy with 3 layers chrome plated, which can resists scratching, fading & tarnishing. One-piece thicken metal design to prevent breakage. What's more, the durable quality & elegant desi....

Check Stock

Windspeed Side Mount Toilet Tank Flush Lever Handle for Toilets

Toilet tank flush lever with handle, our chrome plated and stylish platinum toilet flush handle replacement quickly upgrades your toilet..
Material: Brass, alloy and plastic, toilet flusher replacement kit, metal plating wrench with copper lever, not easy to rust, highly durable handle arm construction, strong and durable for long time use..
Brass Lever Length: Approx. 9 inch in length, and 3 inch in width. There are three holes in the copper lever which allow different position for installation..
Fit most side mounted tank, suitable for TOTO toilet tank, flush tank lever handle replacement is compatible for ST701/CST604CEF/CST614CEF/CST634CEF/CST644CEF/CST853/CST853E/CST853S/CST854/CST854E/CST854EL/CST854S/CST854SL/CST863/CST863E/CST864/CST864L/CST864E/CST874S/CST884/CW844/CW864/CW854RB/CW764BT400/SW764B/CW764BT305/CW744RB etc..
Perfect solution for your decorative bathroom, the toilet side flush handle to decorate your bathroom, make your life perfect and convenient. chrome toilet handle is great for kids, toddlers and elderly without having to apply too much pressure..

Check Stock

4 Pieces Toilet Handle Replacement Kit Front Mount Toilet Tank Flush Lever Replacement with Toilet Flapper Replacement and 2 Pieces Stainless Steel Chain Fits Most Toilets

Universal flapper: the baffle of the toilet flapper measures about 2 inches, universal size, which can be adjusted according to the actual situation and suitable for the for American standard.
Toilet flapper is the repair replacement for American standard 7381129-200.0070A toilet flapper.
At the same time, it is tightly sealed by soft and durable rubber and a foam roller, not easy to leak.
Practical design: the counter balance toilet flapper features with a front flush lever which is designed to be applied in toilet.
The anti-loosening nut of the draw rod has a lever, which fits well for the square mounting hole.
Meanwhile, the nut also has a reverse thread, which will not become loose with the passage of time.
You can twist and bend it the metal rod in the water tank according to the actual situation of your toilet, then observe the actual effect it brings.
Nice replacement parts: this toilet stopper flapper features with a universal and adjustable function, nice for standard flush valves and other toilets, helping to save water and developing healthy lifestyle.
Besides, toilet stopper flapper is easy and fast to install without tools.
Powerful functions: toilet handle replacement kit has powerful functions.
The durable rubber not only can resist exhau....

Check Stock