Best Large capacity Toilet Valve Kit

Danco HYR451T HyrdroRight Universal Water-Saving Toilet Repair Kit with Dual Flush Valve, Lever Handle, White

  • WATER-SAVING DUAL FLUSH TOILET REPAIR KIT: Easily converts a standard toilet into a dual flush toilet that saves water by reducing the amount of water used with each flush. The permafit silicone seal is also chlorine and chemical resistant and will not warp..
  • ELIMINATES TOILET LEAKS: Eliminates common leaky toilet problems due to a worn-out flapper, handle or faulty flapper chain..
  • DUAL-FLUSH LIGHT-TOUCH LEVER UNIQUE SPLIT HANDLE DESIGN: The short center lever is the Quick Flush setting that uses significantly lower water volumes for liquids and paper – this setting is needed 4 out of 5 times. The second complete push lever at end is the Full Flush that uses the normal amount of water for solids..
  • COMPATIBILITY: The Dual Flush Converter works with standard 2 in. flush valves and requires a 10-inch minimum clearance from highest point of the flush valve opening to the inside of the tank lid. NOT COMPATIBLE WITH MANSFIELD TOILETS. The HYR451T combines two products that together will increase your toilet's efficiency: HYR271 Dual Flush Converter and HC630 HydroClean fill valve..
  • HASSLE-FREE INSTALLATION: Drop-in installation without tools in 5 to 10 minutes - tank removal not required..
  • IMPORTANT INSTALLATION TIP: Do not remove overflow tube and flush....
Check Stock

Danco HYR460 Hydroright HyrdroRight Universal Water-Saving Toilet Repair Kit with Dual Flush Valve, Push Btton Handle, White

  • WATER-SAVING DUAL FLUSH TOILET REPAIR KIT: Easily converts a standard toilet into a dual flush toilet that saves water by reducing the amount of water used with each flush. The permafit silicone seal is also chlorine and chemical resistant and will not warp.
  • ELIMINATES TOILET LEAKS: Eliminates common leaky toilet problems due to a worn-out flapper, handle or faulty flapper chain.
  • DUAL-FLUSH LIGHT-TOUCH BUTTON UNIQUE SPLIT HANDLE DESIGN: The short center button is the Quick Flush setting that uses significantly lower water volumes for liquids and paper – this setting is needed 4 out of 5 times. The second complete push button at end is the Full Flush that uses the normal amount of water for solids.
  • COMPATIBILITY: The Dual Flush Converter works with standard 2 in. flush valves and requires a 10-inch minimum clearance from highest point of the flush valve opening to the inside of the tank lid. NOT COMPATIBLE WITH MANSFIELD TOILETS. The HYR451T combines two products that together will increase your toilet’s efficiency: HYR271 Dual Flush Converter and HC630 HydroClean fill valve.
  • HASSLE-FREE INSTALLATION: Drop-in installation without tools in 5 to 10 minutes – tank removal not required.
  • IMPORTANT INSTALLATION TIP: Do not remove overflow tube and flu....
Check Stock

Fluidmaster K-400H-039 High Performance Toilet Fill Valve with 2-Inch Adjustable Toilet Flapper Kit

  • The PerforMAX fill valve and 2 in. Flapper Kit is the premium solution to make your 2 in. flush valve toilet run like new.
  • PerforMAX toilet fill valve offers high performance with adjustable tank and bowl water for full water control.
  • PerforMAX Water-Saving Toilet Flapper included to save water use per flush.
  • Adjustable fill valve height to fit more tanks, corrosion resistant flapper, Solid frame for a secure seal, 7 year warranty.
Check Stock

4 Pack Flush Valve Seal Gasket Replacement Compatible with Mansfield 210 and 211, Toilet Flush Valve Replacement Kit Red RV Toilet Seal Compatible with Mansfield 210 and 211

  • Suitable for: these toilet tank gaskets are suitable for Mansfield models 210 and 211 series.
  • You will get 4 pieces toilet seal replacement in red color.
  • Enough quantity can reduce the number of purchases, protect your home life and meet your demands.
  • Proper Size: toilet flush valve seal measures about 8.1 x 8.5 x 0.16 cm/ 2-1/8 x 3-1/8 x 1/16 inch.
  • Suitable size fits well for most toilet, please check the size before ordering.
  • Quality Material: the toilet valve seals are made of rubber, with nice deformability and corrosion resistance, which can prolong the service life of the product and help your toilet work better.
  • Easy to Install: installation dose not need complicated process, the valve seal repair kit can be installed easily with simple steps, please see the installation tutorial below for details.
  • Solve Your Troubles: the toilet valve seal replacement is to solve the problem of excessive flushing sound and too small flushing volume of your toilet, which has caused trouble to your life.
  • The existence of these toilet seal parts is to solve your troubles and make your home life happy and easy.
Check Stock

HTDAK 12 Inch (About 30cm) Toilet Fill Valve Silent Toilet Repair Water Saving Dual Flush Fittings Silent Split Toilet Valve Top Button Replacement Assembly

  • Toilet flush valve: for split toilets with top button, button hole diameter 3.8cm, drain hole diameter 6cm-7cm, measured tank height: 27cm-34cm, with tank cover height: 32cm-40cm.
  • Toilet filling valve: for toilets with bottom inlet, installation thread G15/16, adjustable range according to different tank heights: 27cm-34cm..
  • The double flush valve of the toilet can adjust the water level up and down to achieve full flush or half flush, and save water by adjusting the flush volume to reduce unnecessary expenses..
  • The toilet replacement valve kit is made of stainless steel, high-density carbon particle rubber, and high-quality silica gel: it has anti-corrosion, wear-resistant, rust-proof, leak-proof and other properties, and is suitable for operation under various water pressures and water quality..
  • The universal toilet replacement valve body is simple in structure, easy to replace, and only takes 10 minutes to install. It is easy to clean and maintain, so that your toilet components can continue to run smoothly..
Check Stock

Korky Platinum Fill Valve and Flapper Kit

  • UNIVERSAL FILL VALVE: This toilet fill valve replaces ballcocks & worn down valves for different types of 2-piece & 1-piece toilets. It’s easy to install & keeps your toilet running smoothly..
  • EASY TO INSTALL: Quiet replacement fill valve has a twist-lock adjustment that makes installation the easiest when you’re doing toilet repairs. Adjustable from 7.75” to 13.5.”.
  • INCLUDES: Installs in less than 5 minutes. Includes fill valve, refill tube, metal refill tube clip, mounting nut, cone washer, refill adjuster, coupling nut, tamper proof key & instructions..
  • UNIVERSAL FLAPPER: The 2″ universal flapper adjusts to fit flush valves in HET toilets & the flexible long lasting rubber creates a tight seal..
  • FOR LEAKING & RUNNING TOILETS: Save on expensive water waste with this large toilet flapper with a universal & adjustable design that fits standard flush valves & newer toilet models. No tools required..
  • LONG LASTING CHLORAZONE red rubber city water treatment, hard & well water. This toilet part replacement includes the universal adjustable flapper & stainless steel chain..
Check Stock

Fluidmaster 400AKRP10 400AKR Universal All in One Toilet Repair Kit, 2 inches, Easy Install

  • RESTORES OVERALL TOILET PERFORMANCE: All in one toilet repair kit replaces inefficient fill and flush valves, leaky flappers, and broken toilet handles to make your toilet run like new..
  • UNIVERSAL DESIGN: 400A toilet fill valve adjusts easily from 9 – 14 inches, fits most 2-inch flush valve toilets, and is ideal for use in 1.6 to 3.5 gallons per flush toilets or larger.
  • HIGH PERFORMANCE FLAPPER: PerforMAX high performance 2-inch adjustable water-saving toilet flapper maximizes water usage with each flush.
  • EASY INSTALLATION: Easily installs in 10 minutes or less to get your toilet flushing like new again.
Check Stock

LASCO 04-4104, 1-Pack

  • Adjustable 6-Inch-12-Inch, with refill tube and supply nut, no float needed.
Check Stock

385311641 Water Valve Kit, Plastic RV Camper Toilet Valve Parts for Pedal Flush Valve Toilets Compatible with Sealand 300 310 311 320 and 321 Series RV Marine Toilet Flush Valve Replacement (1 Piece)

  • Quality material: this 385311641 water valve kit made of quality ABS plastic material, sturdy construction to prolong the serve life and performance of this rv toilet parts.
  • Nicely fix and fit your toilet's hardware.
  • Applied for: the rv toilet valve parts and flush ball gaskets are compatible with Sealand 300/ 310/ 320 RV, Camper, trailer toilets, very practical.
  • Easy to use: you just need to snap the rv flush valve in, secure with 2 screws, and reconnect water lines.
  • Make it easier on yourself if you don't have ample room behind your toilet and use a mirror (or your phone in selfie mode) so that you can see the back of the assembly.
  • Nice combination: you will get 1 x toilet valve, 1 x rv toilet ball seal replacement, 1 x hose clamp, 2 x stainless mesh filters and 2 x screws.
  • Warming tips: check part numbers to ensure proper fit.
  • During the installing the rv water valve, please insure to install button with the correct angle in case that being broken.
Check Stock