Best Teflon Tube Fitting

3/4” Rod End Heim Joint KIT Left and Right Hand Thread 2 Big .750” Chromoly Joints Panhard kit

  • Heim Joint Rod End Kit: Each pack comes with 1-right hand thread and 1-Left hand thread Heim set along with jam nut spacers that are zinc coated to offer more durability and tube adapter to fit 1" ID tube.
  • Long Term Use: These massive Heim joints are heat-treated and hard chrome plated to give you a better finish for longer use. Chromoly is stronger than steel and offers 28,000 Pound static load rating for heavy-duty performance.
  • Friendly Support: Our Heim joints for 3/4” rod end are backed by our 24/7 friendly support that is always willing to help. If you have any issues with the product then just contact us so we can help you resolve them smoothly and quickly.
  • Multi Function: Made using a 3/4” bore so the Heim joints offer more strength and precision fitting which coupled with the is Teflon Nylon Race ensures exceptional durability to complement steering joints and link joints on hot rods or custom builds..
  • Chromoly Construction: These Heim joints for steering and suspension are made using Chromoly (offers higher strength than carbon steel) as well as being resistant to rust and corrosion to provide long term use..
Check Stock

CHPOWER PTFE Bowden Tubing 1 Meter XS Series for 1.75mm Filament with PTFE Teflon Tube Cutter + Upgraded PC4-M6 and PC4-M10 Pneumatic Fittings with Metal Teeth and Collet Clip

  • Teflon Tube - outside diameter 4mm, inside diameter 2mm.
  • it made of premium PTFE (Poly Tetra Fluoro Ethylene) material, safety....
  • PC4-M6 fittings - thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm.
  • PC4-M10 fittings - thread M10/6mm, inner diameter(black end) 4mm, fit for the tube whose outer diameter is 4mm.
  • 2 Colors options - white and blue teflon tube are avaliable,They are compatible with all 1.75mm PLA ABS 3D printer.
  • Attention - small 3D printer accessories, please keep away from children.
Check Stock

LUTER 3 Pieces Teflon Tube PTFE White Tubing 1m + 3 Pieces Quick Fitting for PC4-M6 + 3 Pieces Straight Pneumatic Fitting Push for PC4-M10 to Connect for 3D Printer 1.75mm Filament

  • PTFE Blue Tubing - the blue color teflon tube outside diameter 4mm, inside diameter 2mm, density 2.15-2.20g/cm3.
  • PC4-M6 fittings - thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm.
  • PC4-M10 fittings - thread M10/6mm, inner diameter(black end) 4mm, fit for the tube whose outer diameter is 4mm.
  • Premium Material - the teflon tube made of durable PTFE (Poly Tetra Fluoro Ethylene) material, PC4-M6 Fittings is made of Copper.
  • Attention - small 3D printer accessories, please keep away from children.
Check Stock

Seeutek Heat Press 12x10 inch 5 in 1 Shirt Press Tshirt Pressing Machine Swing Away Digital Heat Transfer Multifunctional Sublimation Press Combo for T Shirts Mug Hat Plate Cap

  • ...adopts double-tube heating design, which makes the whole heating plate heat evenly, and the printed pattern is clearer than single-tube heating design. Adjust the proper pressure with the adjustment knob for better performance. The heating plate is easy to remove, easily replace the plate press and hat press..
  • ✅【Teflon Coated Heating Plate】Heat press 12x10 adopted the latest teflon coated heating plate, protect your vinyl, clothes while doing the heat transfer. The teflon heat plate is heat resistance, easy to clean, and can make pattern more steady. Innovative alloy slide guide rail design for easy conversion between other heating element. Ergonomic design handle, comfortable and durable..
  • ✅【Slide Out Design & 360° Swing Away】Heat press 5 in 1, swing away design, allows the heating element to be moved aside, reducing the chances of unexpected touch. Temp range: 0~482℉(0~250℃), Time range: 999s. Set the temp and time according to demand, it stops heating when the heat plate heats up to the preset temp. And sound alarm will be issued when the countdown is over..
  • ✅【Widely Used】Tshirt pressing machine combo can be used for t-shirts, caps, ceramic plates, mugs, coasters, mouse pads and more. The heating plate can quickly reach the pre....
Check Stock

304 Stainless Steel Compression Tube Fitting Double Ferrule Joint Connector Equal Straight Adapter(Φ1/2-Φ1/2)

  • STAINLESS STEEL: The 304 stainless steel compression tube fitting double ferrule construction for durability and resistance to corrosion..
  • SCOPE OF APPLICATION: The stainless steel compression tube fitting double ferrule has dual couplings for joining two tubes of the same diameter..
  • LESS LEAKAGE: This stainless steel compression tube fitting has a double ferrule construction, reducing the possibility of leakage..
  • SIMPLE OPERATION: Back ferrules hold tubing tight within the body of the fitting while front ferrules hold tubing tight through the nut..
  • APPLICABLE MEDIUM: This stainless steel compression tube fitting double ferrule is applied to oil, water, gas and other non-corrosive or corrosive medium..
Check Stock

2pcs Compression Tube Fitting Adapter, Stainless Steel Straight Adapter, Double Ferrule Joint Connector, for Connecting Pipes Fittings(Ф6-Ф14)

  • 【Reasonable Design】The quick-screw design of the sleeve has good air tightness and is not easy to leaking..
  • 【High-quality Materials】The tube fitting adapter is made of 304 stainless steel, which is resistant to rust and corrosion..
  • 【Good Fixability】The design of the middle card board of the compression tube fitting adapter can be fixed without shaking..
  • 【The Scope of Application】The tube fitting double ferrule joint connector is an adapter used to connect different types of pipes or fittings..
  • 【Easy to Install and Disassemble】The stainless steel compression tube fitting adapter can be quickly installed and removed, making it more convenient to use..
Check Stock

OUOSY Non-Stick PTFE Teflon Sheet for Heat Press 16' x 24 Reusable Transfer Sheets for T-Shirt Press HTV Ironing Quilting Crafting Baking and Heat transferring, 500 Degrees 4 Pack, White

  • Non-stick & Easy Clean Up : Clean up is a breeze. Nothing sticks to these PTFE teflon sheet. You just wash them in soapy water and soft cloth. Please do not scratch them with sharp knives.Meanwhile, the sheets are waterproof. Just wipe off drips or water with soft cloth..
  • Heat & Tear Resistance : The transfer sheets are made from high quality food-grade fiberglass cloth coated PTFE teflon that makes them strong and sturdy. They are heat and tear resistance. High temperature up to 260℃ (500℉). They are perfect items for some projects in high temperature..
  • Reusable & Durable : These sheets can be used over and over again.Both side use.The teflon sheets are easy to cut down to any size and do exactly what you need them to do..
  • Wide Application: The heat teflon sheet can serve as pressing vinyl onto shirts, iron-transfer, quilting,crafting, baking sheets, cooking sheet, splatter liners for oven, iron clothes protector, painting sheets, HTV transfer sheet and more. The non-stick surface is easily wipe off messy materials like wipe acrylic, watercolors, resin, hot glue, wax, baking clay. You can use these over fabric to protect more delicate fibers..
  • Package Include: 4 pack teflon sheets in a package. Each size is 16’’ x 24’’ (40 x 60cm). They come....
Check Stock

M MINGLE Pressure Washer Adapter, Metric M22 15mm Female Thread to M22 14mm Male Fitting, 4500 PSI

  • ATTENTION: CONVERT METRIC M22 15MM FEMALE TO M22 14MM MALE. M22 14mm fitting is compatible with Generac, Simpson, Briggs Stratton, craftsman, karcher, Ryobi pressure washer. M22 15mm fitting is compatible with Sun Joe, Campbell, MI-T-M, AR Blue, Stanley, Cleanforce, Simoniz, Excell power washer..
  • If not sure which fitting on the pressure washer accessory, please measure the outsize diameter of inside plug at the female end or measure the inside diameter of male end. If 14mm, it is M22 14mm fitting. If 15mm, it is M22 15mm fitting. Pressure washer coupler connects power washer gun to hose, hose to pump..
  • If leakage, please put teflon tape on the male threads of your wand or other products..
  • Made of high quality brass, resistance to corrosion. Working pressure is up to 4500 PSI.
  • M MINGLE is professional on Pressure Washer Accessory and always stand behind our products, please free to contact us if any questions..
Check Stock

Lucas Oil Marine Grease/12x1/ 1 lb Tub

  • Marine Grease 2-4-C with PTFE is a high-quality, versatile lithium‑based NLGI 2 grease that won’t break down in the presence of water.
  • Excellent general-purpose teflon grease for steering system cables, throttle and shift cables, tilt lock mechanisms, tilt tube, remote controls, prop shaft, swivel pins and trailer wheel bearings.
  • Contains extreme pressure additives to withstand friction in a wide variety of heavy equipment applications and temperatures.
Check Stock