Best Teflon Filament

PTFE Teflon tubing 5ft- 2mm ID X 4mm OD for 1.75 Filament Bowden 3D Printer -Allen Tech PTFE Teflon Tube

  • ID:2mm(0.079'')/OD:4mm(0.158''),Length:5ft.Material: PTFE(common name:Teflon).For 1.75 filament Bowden 3D Printer,Translucent.
  • Temperature range (Degree F):-454 to 500. Flame rating: UL-224 VW-1(UL-recognized). Density: 2.15-2.20 g/cm3..
  • Excellent resistant to acids, alkali and all kinds of organic solvents: ASTM D543. High lubricating ability and non-stick.
  • Raw materials meet FDA requirements per FDA 21 CFR 177.1550 for use with food contact surfaces.
  • Excellent electric property and long life. Widely used in electronics, chemicals, medical and industrial.
Check Stock

Creality Ender 3 /Pro/V2 3D Printer Assembled Extruder MK8 HotEnd Kit 24V with 0.4mm Nozzle Upgrade with Low Friction Creality-Capricorn Tubing

  • It's 100% Creality Original and Creality-Capricorn PTFE Tubing..
  • Upgrade with Low Friction Creality-Capricorn Original Teflon Tube 40CM..
  • Hotend replacement parts suitable for ender 3, ender-3x, ender-3 pro, Ender 3 V2 3d printer..
  • High Lubricity Additives make our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more responsiveness, less....
  • Creality-Capricorn tube is far superior to the white PTFE tubing supplied with most 3D printers. Its much smoother to feed filament through. And when....
Check Stock

MK8 Extruder Hotend 3D Printer Assembled kit for CR-10/CR-10S/CR-S with Aluminum Heating Block 1.75mm, 0.4mm Nozzle

  • 100% original and high quality 3D Printer accessories for Creality CR10/ CR10S/ CR10S4/ CR10S5.
  • MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heating tube 24V 40W.Perfect replacement accessories/parts for Creality CR-10 CR-10S S4 S5 3D Printer.
  • This CR-10 hotend can work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle.
  • Tip of MK8 0.4mm nozzle, aluminum heating block, throat pipe (built-in Teflon) for 1.75mm filament.
  • With nine(9) cooling fins on the heatsink.No blockage,no leakage,fast heat dissipation, better printing effect..
Check Stock

Twotrees J-Head V6 Hot End Full Kit 1.75mm 12V RepRap 3D Printer Extruder Parts Accessories 0.4mm Nozzle

  • 【1】Applicability & compatibility: compatible with all 1.75mm V6 Makerbot 3D printer.
  • NTC connector with terminal, easy to intall..
  • 【2】Anti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking ..
  • 【3】Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality resistor whose temperature can up to 280°C, 12V high speed fan, radiating quickly ..
  • 【4】Specification: brass material extruder nozzles, output diameter 0.3mm/ 0.4mm/ 0.5mm, input diameter (filament) 1.75mm ..
  • 【5】Package include: all metal V6 hotend 12v / 40w / 1.75mm / 0.4mm extruder full kit (V6 printhead + fan + fan cover + PTFE tube + pipe fitting), 1 pieces brass extrusion nozzles (1×0.4mm ) and a v6 heating block, a 2-part Teflon tube in the nozzle neck made of stainless steel..
Check Stock

The Deep Hollows: Awakened Soul, Book One

  • 【 NON-STICK & EASY TO CLEAN】 Our non stick teflon sheet for heat press protect your vinyl, clothes, and iron while you iron on HTV with our professional grade. Teflon sheet uses easily wipe off messy materials like wipe paint, glue, paint, wax or clay. Even after a period of use, you just need to use a mild detergent to clean teflon paper with a soft sponge and air dry..
  • 【MULTI-PURPOSE CRAFT ITEM】 The teflon sheets can be non-stick oven liners, iron clothes protector, heat press transfers, ironing board. You can bake, roast, press, fuse, iron, applique press, paint with teflon paper for heat press. The teflon sheets for heat press can work well in sublimation, 3D printing, masking, welding, packing fixing, PCB, electronic repair and other DIY projects..
  • 【HEAT RESISTANT & REUSABLE】These heat press paper heat resistance up to 600° degrees. Protect your vinyl, clothes and iron while you iron on htv, teflon pressing sheet is perfect for heat press! Made from super thick paper, heat press transfer sheet can be utilized many times on both sides and enough to be used over 1000 times..
  • 【QUALITY & CONVENIENT FOR USE】 The teflon sheets for heat press reusable are 12" x 16" in size. The teflon baking sheet is made of extra thick 0.1mm food-grade p....
Check Stock

SUNLU Filament Dryer, 3D Printer Filament Storage Box, 360° Surround Heating, Touch Screen, Humidity Detection, Dryer Box for Nylon PA ABS PETG PLA Filament 1.75/2.85/3.00mm, FilaDryer S2, Black

  • ①【Importance of Filament Dryer】Any material of filaments will absorb moisture from the air, filament being old or in high humidity place may absorb a lot. Damp filament will cause many printing issues, filament dryer can remove moisture from the damp filament..
  • ②【Keep Filament Dry During Printing】The filament dryer can be used as a filament spool holder, so filaments can be dried during 3D printing, it can improves print quality. If the 3D printer is in basement or orther humid place, it's more important to keep filament dry..
  • ③【Bring Damp Filament Back to Live】Filaments that have been stored for a long time may have absorbed a lot of moisture, filament dryer is specifically made for drying 3d printer filament, it can effectively remove excess moisture to save the old filament..
  • ④【Fast Heating and Even Drying】SUNLU filament dryer can heat up to preset temperature quickly, the built-in spindle keeps the filament spinning continuously, heating evenly. Adjustable drying time range: 0-99 hours, adjustable drying temperature range: 35-70 ℃..
  • ⑤【Very Simple but Very Effective】SUNLU filament dryer is very easy to use, FilaDryer S2 is equipped with a large touch screen, you can set different dry temperatures and dry times for diffe....
Check Stock

SUNLU PETG 3D Printer Filament, PETG Filament 1.75mm Dimensional Accuracy +/- 0.02 mm, 1 kg Spool, PETG Blue

  • 【8 Rolls of 0.25kg 1.75mm PLA Filament, Multiple Color Choices】8 rolls of 250g SUNLU 1.75mm PLA filament.Color:Black+White+Grey+Burly Wood+Purple+Blue Grey+Grass Green+Pure+Yellow.The design of 250g PLA filament is convenient for customers with multiple color needs.Especially for multi-nozzle 3d printer users and 3d pen users..
  • 【SUNLU Toughness-enhanced PLA Filament】 SUNLU premium PLA filament offer the advantage of incredible ease of 3d printing.SUNLU PLA filament,optimized print quality,high purity with low shrinkage and superb interlayer adhesion.Meet your needs for 3d printing projects on functional parts with higher toughness..
  • 【High Precision +/- 0.02mm Tolerance PLA filament】: 1.75mm PLA 3D filament(Tolerance Level : ± 0.02mm).0.25KG 3d printer filament reel,perfect roundness and very tight diameter tolerance,approximately 68m of PLA filament on each spool ease of use,minimal warping,no clogging,no bubbles.Increase your 3d printing objects delicacy..
  • 【No Clogging, no Bubbles and Good Adhesion】Better flow of SUNLU no plugging premium 1.75mm PLA filament.It has consistent diameter & roundness,less stringing and warping,strong layer adhesion.Article-free and impurity-free.No impurities,no clogged.Recommended PLA Filament Extrusion/N....
Check Stock

3D PETG Filament 1.75mm Black 3D Printer Filament 1kg Spool PETG Filament Dimensional Accuracy +/- 0.02 mm PETG Black XVICO

  • 【PETG Filament Printing Tips】 petg 3D filament has the advantages of high purity with low shrinkage and superb layer bonding, Filament 1.75mm meeting your demands for different printing projects. 1.75 petg Filament 100% made of environment-friendly natural materials, harmless to users and the environment.petg Filament Recommended Extrusion/Nozzle Temperature 230°C – 240°C, Bed 70°C – 80°C..
  • 【petg filament 1.75mm Clog-free & Bubble-Free】3D Printer Filament approximately 2.2 LBS 1 KG Spools.petg filament Completely dried for 24 hours before packaging and vacuum sealed with desiccants in nylon re-bag, enable much smoother and more stable printing. Since the petg filament is prone to moisture, please store it into a re-sealable aluminum foil bag after unsealing to maintain excellent printing performance..
  • 【PETG Filament Less-tangle & Wide Compatibility】3D Petg Filament Full mechanical winding and strict manual examination, which guarantee the Petg filaments tidy and easy to be fed.The 1.75mm filament You don’t have to worry that it will be incompatible with your 3D printer — 1.75 mm in diameter, dimensional accuracy +/- 0.02 mm. It works perfectly with most FDM 3d printers on the market..
  • 【3D Petg Filament ACCURACY & CONSISTENCY】....
Check Stock

ERYONE Silk Dual Color Filament PLA 3D Printer 1.75mm, +/-0.03mm, Coextrusion Filament PLA Shiny Filament 1kg(2.2lbs), Red Green

  • 1.【Silk Dichromatic Filament】ERYONE dual-color silk filament is made from two individual colors, extruded into one filament strand.You can change the visible color by rotating the color-blending filament to different orientations..
  • 2.【High Accuracy Silk Filament】The diameter of the blended dual color silk filament is 1.75mm with a tolerance of +/-0.03mm. Dichromatic PLA filament feed smoothly and constantly without clogging the nozzle or extruder making you a smoothly printing & better surface..
  • 3.【No Warping Multicolor Filament】Perfect winded silk blended color pla filament,tangle-free before unopened, no stringing and warping.Universal compatibility with most FDM 3D printers and 3D Pens..
  • 4.【Strong Layer Adhesion】This silk PLA filament has perfect first layer adhesion to reduce warpage, shrinkage, curl and print failure.1.75mm Dual color silk 3D printer PLA Filament is no bubble,strong layer adhesion make the printing parts stronger..
  • 5.【Silk Effect Filament】When printed with this 3D printing silk dual color filament, it creates a really unique look on your parts! Multicolor silk filaments can output with incredible pearlescent and gorgeous silk surface..
Check Stock