Best Swivel Air Fittings

Hromee 18 Pieces Air Coupler and Plug Kit 1/4-Inch NPT Air Hose Fittings and Compressor Accessories with Universal Quick Coupler Brass Ball Valve Swivel Air Plug and Tee Pipe Fitting

  • UNIVERSAL QUICK COUPLER - The 1/4'' NPT universal couplers (male and female) which fit Industrial (I/M), ARO (A) and Automotive (T) so you do not worry about whether it is fitting or not. Heavy duty steel air fittings are ideal for general purpose applications and the brass has good solid and durability..
  • SWIVEL QUICK PLUGS - The special design of 1/4" basic swivel body, preventing hose kinks and increasing mobility, great for air tools to reduce strain on wrist and air hose. Made of high-quality corrosion resistant zinc plated hardened steel, solid body for use of a longer life. The maximum operating pressure is 300 psi..
  • HEAVEY DUTY BALL VALVE - The ball valve is made of forged brass for corrosion resistance, ductility at high temperatures and low magnetic permeability. It has a plastic-covered lever handle for on/off manual control so can be used to give your tool full air flow to total shut-off. Designed for use on all pneumatic circuits and features a quick connect/disconnect positive seal..
  • TEE PIPE FITTING - The tee fitting is T-shaped and has three openings to connect and branch three pipes, two on the main run and one branch at a 90-degree angle from the middle of the tee. It has 2 x 1/4” female and 1 x 1/4” male for connecting pipes. Pipe ....
Check Stock

ABN 1/4in NPT 360 Degree Swivel Connector with Adjustable Tension Control to Stop Leaks – For Any Air Tool

  • Convenient: This ABN 1/4" Inch NPT 360 Degree Swivel Connector accepts NPT threads, 1/4-inch fittings and quick connect adapters.
  • 360-Degree Swivel: Increases maneuverability, reduces hose stress and kinks, extends hose life, and reduces operator fatigue.
  • Non-Restrictive: This connector offers an obstruction-free flow.
  • Adjustable: A screw on the end of the unit adjusts the tension and stops/prevents leaks.
  • For Any Air Tool Application: Perfect for use on any compressed air line.
Check Stock

JACO Lightning Tire Air Chuck Kit (Set of 7) | Open Flow, 1/4\ F-NPT

  • ...ement - no more fighting the valve stem, no more air loss..
  • LIGHTNING FAST - our all-new quick-release valve that lets you rapidly disconnect the air chucks from the tire valve stem with absolutely zero air loss - completely eliminating any margin for error when precision matters most..
  • OPEN FLOW - laser-cut threaded fittings (1/4 inch F-NPT) for compatibility w/ tire inflators & gauges to control flow from air compressor w/ precision for tire inflation (not recommended to attach directly to air compressor hose)..
  • EASY TO USE - built tough from high-density aluminum alloy, so they will never rust, fail, or fall apart like traditional chucks. Feature various exclusive features such as 360 swivel points to eliminate frustrating air hose tension. Pack includes air fittings for all types of valves stems (dually, vehicle, presta, etc)..
  • BUILT TO LAST - engineered by the experts at JACO w/ over 35 years of experience in the industry, and proudly backed by our 100% Lifetime Warranty. Experience firsthand the most revolutionary advancements to air chucks ever made with our exclusive Lightning Technology..
Check Stock

Keg Disconnect Ball Lock MFL Ball Lock Fittings Keg Connectors – Keg Coupler Stainless Ball Lock Keg Fittings 12-Piece

  • ...TE BEVERAGES: Use the G. Francis Ball Lock Keg Fitting Ball Locks 12-Piece Ball Lock Quick Disconnect Set with Liquid & Gas Disconnects, Swivel Nuts, & Hose Clamps to ferment and dispense craft cocktails, soda, and other beverages from your existing keg.
  • USE YOUR KEG: Each of the ball lock keg connectors (fittings) have an approximate 2.2-inch height and 1.3-inch outside diameter (5.6cm x 3.3cm) and is compatible with ball lock Cornelius (Corny) kegs and keg couple adapters for homebrewing.
  • Hose clamps have 0.2-inch to 0.5-inch (6-12mm) diameter while the barbed swivel nuts have 5/16-inch outside diameter (OD) fitted for 1/4-inch or 3/16-inch inside diameter (ID) hoses on your 3, 5, or 10 gallon keg.
  • BUILT TO LAST: Keg ball lock quick disconnects and hose clamp wings constructed from ABS plastic that resists rust and corrosion.
  • Swivel nuts and clamps constructed from food-grade stainless steel for maximum strength and longevity.
  • INSTALL EASILY: Tighten the swivel nut connecting the flare fitting before use.
  • Ensure correct fittings are installed on input and output posts – Light gray disconnect for gas inlet and black disconnect for fluid outlet.
  • To install fittings, pull up lever on ball lock disconn....
Check Stock

WYNNsky 1/4\ NPT 360 Degree Swivel Air Hose Connector, 1/4 Inch Industrial Swivel Air Fittings

  • Improved the flexibility between hose and air tool..
  • Swivel helps air lines from getting tangled and twisted..
  • 1/4" basic body size with Max working pressure of 300PSI..
  • Accepts both standard threaded fittings and quick change adapters..
Check Stock

EVIL ENERGY 6AN to 3/8 Barb Push Lock Hose End Fitting 45 Degree Blue&Red 2PCS

  • 6AN female swivel to 3/8 barb fitting 45 Degree.
  • Please attention that AN6 push lock fitting only be worked with rubber fuel line. It can not be installed on PTFE Hose, Nylon Braided Hose, or....
  • Thread Size of 6an 45 Degree push lock fitting is 9/16-18UNF and the rubber fuel line which works with should be 3/8"..
  • Push on locking fittings are much more easier on installation than swivel and PTFE fittings. (high-pressure system not recommended).
  • EVIL ENERGY Provide plenty kind of fuel fittings, Swivel, Push-on lock, PTFE hose end and other fitting adapters..
Check Stock

Utah Pneumatic Dot Air Fittings Tee Union 1/4”Od 1/4” Npt Air Push Fittings Male Female brake tube fittings Push In Fitting D.O.T Approved For Sae Brake Line fittings Applications Pack Of 2

  • Typical application: Air brake systems push dot fittings pneumatic fittings brass air brake fittings dot air line fittings.
  • Maximum operating pressure of 150 psi dot air brake fittings air line fittings 1/4 dot push union dot compliant air line fittings.
  • Temperature Range:_65°F to +250°F-40°C to +93°C push-to-connect fittings ptc air fittings push lock fittings.
  • Material:CA360 ,CA377 brass push air fittings tee brass fitting airline tee fitting air fittings 1/4 dot.
Check Stock

YOTOO Heavy Duty Air Compressor Accessories Kit 20 Pieces with 1/4 inch x 25 feet Polyurethane Air Compressor Hose, 100 PSI Tire Inflator Gauge, Air Blow Gun and Air Hose Fittings

  • GREAT AIR COMPRESSOR KIT with all you need to start your projects. ONE YEAR WARRANTY. If any problems, Please feel free to contact us at any time..
  • TIRE INFLATOR WITH GAUGE FOR INFLATING CAR TIRES AND PRESTA VALVE BICYCLES: Air inflation gun, air chuck, and tire gauge are all combined in one easy to use unit.
  • Rugged die cast aluminum construction with chrome plate finish that is corrosion-resistant.
  • 1/4"X25' POLYURETHANE AIR HOSE FOR CONNECT AIR COMPRESSOR AND AIR TOOLS: Polyurethane material make this air hose durable and reliable. 1/4" x 25 foot length provides flexibility and freedom of movement while tackling projects. Swivel solid brass and fittings reduce hose twist and bend restrictors reduce kinking and help to increase the life of the hose. Max working pressure:150PSI.
  • 6-PIECE STANDARD BLOW GUN AND NOZZLES FOR CLEANING JOBS AND INFLATING POOLS AND SPORT BALLS: Standard Blow gun with (3) inflation nozzles and (2) inflation needles for pool toys, sports balls and air mattresses.
  • 11-PIECE HEAVY DUTY 1/4" INDUSTRIAL STEEL AIR HOSE FITTINGS: Quick Couplers and plugs are made of hardened steel plated to resist rust and long time use. Recommended use with thread seal tape(Included).
Check Stock

EVIL ENERGY 10AN Straight Swivel Hose End Fitting for Braided Fuel Line Aluminum Black

  • The female AN10 swivel fittings are made of lightweight aluminum alloy 6061-T6 material for strong strength and good durability. Black anodized for....
  • 10AN swivel hose end is widely used in oil/ fuel/ water/ fluid/ airline etc. Connect oil gas line, braided fuel line ,clutch hose,turbo line etc. Our....
  • These new full flow swivel hose ends swivel 360° to allow for a quick alignment of the hose after assembly.Swivel hose end can be reused and recycle....
  • Weld-free construction that gives better fluid flow and integrity over the normal brazed together hose ends. Swivel fittings are easy to use and don't....
  • EVIL ENERGY provide this product have 3-month warranty.We value your shopping experience and strive to offer a high-quality product and service..
Check Stock