Best Cam Lock Air Hose Fittings

MSCRP Fuel Injection Line Fitting Adapter Kit EFI FI w/Filter/Regulator LS Conversion

  • 1Pc 6AN 25 feet of high-pressure fuel injection hose.
  • 1Pc 6AN to 3/8" Male Straight Filter Fittings+1Pc 6AN to 5/16" Fuel Filter Return Line Fitting.
  • 2Pcs 6AN to 3/8" Fuel Filter Feed Line Fittings+2Pcs -6AN to 1/4" NPT Fuel Pump Adapters+2Pcs 45 Degree -6AN Female to 3/8" Push Lock hose fittings.
  • 6Pcs straight -6AN Female to 3/8" Push Lock hose fittings.
Check Stock

PneumaticPlus RED EPDM synthetic Rubber Air & Water Hose 1/4\ ID x 0.53\ OD with 1/4\ NPT Male Fitting Connections (6 FT)

  • ...ype E Connector is installed on both ends of hose by stainless steel clamps, high pressure, sturdy and durable, abrasion resistance, anti-aging, chemical resistance, you can use for a long time..
  • 003c/b003e[SIZE]:003c/b003e Backwash pump hose, standard 3 inch diameter, Flat width 4.85 inch.
  • 3 in Aluminum cam lock fittings type C, type E and extra TYPE A adapter. Length: 50 feet.
  • Temperature Range: 23°F to 149°F (-5°C to 65°C).
  • 003c/b003e[NO LEAK]:003c/b003e Pool Backwash hose doesn’t leak or burst within 90 psi working pressure. Because the delivery hose body adopts fine double-sided coating and fiber reinforcement. The camlock coupling shank is special multi-section structure and added black rubber ring and sealant at the connection..
  • 003c/b003e[WIDELY USED]:003c/b003e Ideal for draining swimming pools, backwash pool filter, sewage pump, sump pump, trash pump, pool drain and sand filter pumps etc.
  • widely used in household, mine, factory, agriculture, and architectural engineering.
  • This drain hose can adapt to most outdoor conditions and all seasons..
  • 003c/b003e[EASILY USE]:003c/b003e It can be easily connected, after Type A is connected to the pump, just slide type A male adapter into type C female coupler, press the b....
Check Stock

D-WEIXIN 2' × 50' Pool Backwash Hose, Heavy Duty Reinforced Blue PVC Lay Flat Water Discharge Hoses for Drain Pools and Clean Filters

  • The pool backwash hose is made of PVC and reinforced with polyester yarn, can withstand 90 psi working pressure during water supply and drainage, heavy-duty, superior strength, economical, durable, leak-free and weather, chemical and burst resistant..
  • Backwash hose is standard 2 inch hose, flat 3.4’’ wide, fit 2’’ standard size filter outlet or cam lock / pin lug fittings, and fit 1.5’’ or less size schedule 40/80 PVC pipe. Be sure to measure your filter outlet to ensure proper fit before ordering..
  • The discharge hose is essential swimming pool supplies, works as pool drain hose, pool pump hose, filter waste hose, also works for agricultural water discharge, irrigation, landscaping, construction dewatering and submersible pumping..
  • The pool hose is made to fit standard connections to backwash pool filtration systems , and you can easily install it with clamp. After use, just roll it up and hardly take up any space, and then store it in a dry place for next use, away from direct sunlight..
  • Unlike traditional paper-thin single layer hose, it can be used multiple times and withstand rough handling. If you want a drain hose that will last, this is what you are looking for!.
Check Stock

EVIL ENERGY 6AN to 3/8 Barb Push Lock Hose End Fitting 45 Degree Blue&Red 2PCS

  • 6AN female swivel to 3/8 barb fitting 45 Degree.
  • Please attention that AN6 push lock fitting only be worked with rubber fuel line. It can not be installed on PTFE Hose, Nylon Braided Hose, or....
  • Thread Size of 6an 45 Degree push lock fitting is 9/16-18UNF and the rubber fuel line which works with should be 3/8"..
  • Push on locking fittings are much more easier on installation than swivel and PTFE fittings. (high-pressure system not recommended).
  • EVIL ENERGY Provide plenty kind of fuel fittings, Swivel, Push-on lock, PTFE hose end and other fitting adapters..
Check Stock

DAVCO 2' x 100 ft Pool Backwash Hose, Heavy Duty Reinforced Blue PVC Lay Flat Water Discharge Pump Hoses For Swimming Drain Pools and Clean Filters,with 1 Clamp

  • The pool backwash hose is made of PVC and reinforced with polyester yarn, can withstand 90 psi working pressure during water supply and drainage, heavy-duty, superior strength, economical, durable, leak-free and weather, chemical, and burst resistant..
  • Backwash hose is standard 2 inch hose, flat 3.4’’ wide, fit 2’’ standard size filter outlet or cam lock / pin lug fittings, and fit 1.5’’ or less size schedule 40/80 PVC pipe. Be sure to measure your filter outlet to ensure proper fit before ordering..
  • The discharge hose is essential swimming pool supplies, works as pool drain hose, pool pump hose, filter waste hose, also works for agricultural water discharge, irrigation, landscaping, construction dewatering and submersible pumping..
  • The pool hose is made to fit standard connections to backwash pool filtration systems , and you can easily install it with clamp. After use, just roll it up and hardly take up any space, and then store it in a dry place for next use, away from direct sunlight..
  • Unlike traditional paper-thin single layer pool backwash hose, it can be used multiple times and withstand rough handling. If you want a drain hose that will last, this is what you are looking for!.
Check Stock

Milwaukee M18GG-0 M18 Cordless Grease Gun

  • 20V BATTERY OPERATED GREASE GUN - 10,000 PSI Max power grease gun powers through the toughest grease fittings. The 20 volt battery powered grease gun is suitable for agricultural, construction, automotive, general maintenance, and industrial applications..
  • PORTABLE RECHARGEABLE GREASE GUN - Our cordless grease guns go where pneumatic grease guns and corded electric grease guns can't. Ideal for mobile workshops, farm use, and emergency maintenance on the road..
  • VARIABLE SPEED PUMP - Adjust the grease flow up to 10 oz/minute for heavy duty applications or dial it down for smaller jobs with delicate fittings. It's a small grease gun that can handle jobs big and small..
  • FULL FEATURES - 30 inch flexible hose for hard to reach fittings, replaceable coupler for longer life with grease gun attachment clips on both sides, on/off trigger lock, easy to use air-bleeder valve, and an LED work light for great visibility..
  • BATTERY POWERED GREASE GUN KIT - Complete electric grease gun kit includes electric grease gun with battery and charger: electric greaser gun, 20 volt rechargeable battery, charger, 30" flexible hose, and grease gun coupler..
Check Stock

Utah Pneumatic Plastic Push To Connect Fittings Tube 10 Pack 1/4\ Od Straight Push Fit Fittings Tube Fittings Push Lock Hose Union (1/4\ Straight)

  • utah pneumatic Push to Connect fittings: air and water Pressure Range: 0-1 Mpa145 psi Max pressure:1.5 Mpa/ 217 psi/15 bar Temperature Range 0-60°C | 32～140°F Applicable Tube: PU/NYLON/Soft PE hose fittings.
  • Easy to install This tube connector is available in various styles and models . Each model to serve its purpose. All models of push lock fittings are designed to suit your pneumatic piping needs perfectly.
  • You can easily change the tubing connector direction even after installation. The release ring of conforms with the ellipse design to ensure that the disconnecting of connect push is in good shape.
  • All push to lock contains internal hexagonal holes this enhances the installation process in a narrow space push connect fittings Can be dismantled and assembled easily These Push In Fittings Meet The Pressures And Temperatures Mentioned.
  • At Extreme Temperatures In Places Close To Heat Sources we Would Recommend Our Brass push connectors Which Is More Resistant To High Temperatures We Are Ready To Answer Any Questions Related To Our Connect It Fittings.
Check Stock

Milwaukee 2646-20 M18 2-Spd Grease Gun Bare Tool

  • Industry leading 10,000 PSI max operating pressure.
  • 48" flexible hose offers greater access to difficult to reach fittings.
  • Lock-on / Lock-off trigger delivers added user convenience.
  • New to world precision through Pre-set grease counter dial.
Check Stock

Draft Brewer New 5 Gallon Stainless Steel Ball Lock Keg

  • 【MFL QUICK DISCONNECT】MRbrew threaded beer cornelius keg ball lock disconnect fittings come with MFL swivel nuts, make hose changing and extra equipment adding a breeze, allow more options of extra functions and possibilities for your kegging system!.
  • 【BUY ACCESSORIES SEPARATELY? NO!】MRbrew ball lock fittings comes with complete sealing and hose connection parts, 5/16” barb for connecting gray disconnect to gas hose, 1/4” barb for connecting black disconnect to liquid hose, clamps guarantee no leak on connection!.
  • 【YOUR LONG-LASTING USE CHOICE】MRbrew ball lock fitting set is made of stable PBT material, it has strong oil resistance, its smooth surface makes cleaning easy. Stainless steel has strong corrosion resistance, not easy to get rust. MRbrew makes your beer brewing more economy!.
  • 【POWERFUL APPLICATION KIT YOU NEED】MRbrew ball lock keg fitting is perfect for most Cornelius Keg, Pepsi Keg and 7-UP tanks, also can be a home brewing adapter of Corny & Keg coupler, suitable for beer, soda, and other beverages dispensing!.
  • 【100% LIFELONG ISSUES SOLVING FOR YOU】Each MRbrew ball lock keg fitting set is backed by unbeatable, reliable, trusted product quality, we will unconditionally solve your problems if you are not satisfied!.
Check Stock