Best Steel Cutting Tools

KEO 53519 Cobalt Steel Single-End Countersink Set, TiN Coated, 82 Degree Point Angle, 5/16\ - 1\ Head Diameter

  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools.
  • Application: Countersinks And Deburs Aluminum, Non-Metallics And Plastics.
  • Straight shank, CNC precision cam ground, M35 cobalt, chatter-free cutting action.
Check Stock

Gyros 2” Mini Resin Cut-Off Wheels for Rotary Tools; 2 Double Fiberglass Reinforced Cutting Discs; Super-Tensile Materials like Titanium, Carbon; Dremel Cutting Tool Accessory; Made in USA 11-42002

  • Efficient and Smooth Cuts – Gyros Fiber Disk, Resin Fiberglass Reinforced Cut-Off Wheels are specially designed and formulated to cleanly cut Super-Tensile Strength materials. These Fiber Disk cutting discs are perfect for commercial, professional, and DIY production due to their minimal heat generation and thin cutting line. They are manufactured in the USA and can work at a maximum speed of 30,000 RPM..
  • Double Reinforced, High Quality – Our cutting discs have high efficiency, unparalleled strength, and flexibility, and are long-lasting and break-resistant thanks to a specially developed fiberglass abrasive with a double reinforced structure. Gyros Fiber Disk ST Multi-Set is a must-have for Professionals and Hobbyists looking for the finest rotary tool accessories for Dremel and other top brand rotary tools..
  • Super Tensile Strength – Gyros ST mini cutting discs are particularly designed to cut Stainless Steel, Titanium, Carbon, Nickel, and Chrome Alloys. The abrasive is properly and perfectly matched to the materials being cut, the cutting action is superior. Other formulations are LT – stands for Low-Tensile Strength materials such as wood, plastic, stone, ceramic, aluminum, copper, brass, and glass. HT – refers to materials with High Tensi....
Check Stock

TJATSE Carbide Inserts MGMN200-G Grooving Inserts for MGEHR/MGIVR CNC Lathe Cut Off Turning Tool-5 Pieces/Pack

  • ♥Size Information: 5pcs MGMN200-G carbide insert: 6mm x 3mm x 2mm, fit for MGEHR / MGIVR grooving cut-off tool..
  • ♥MGMN200 Carbide Inserts made of solid carbide, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance..
  • ♥Specially designed chip breaker allows for narrower chips to promote better chip flow, great for grooving applications and can reduce the tool grinding cost and improve the cutting efficiency..
  • ♥ Tin coated universal grade is suitable for steel and cast steel continuous cutting and interrupted cutting finishing to roughing. Also enhanced the surface gloss of the cutting pieces..
  • ♥TJATSE is a leading manufacturer of production cutting tools for industry. Our goal is to provide to our customers cutting tools that are On Spec and On Time and that are made to your exacting specifications. We will provide you 100% satisfaction guarantee..
Check Stock

GYROS 1.5” Mini Resin Cut-Off Wheels for Rotary Tools; 2 Double Fiberglass Reinforced Cutting Discs; Super-Tensile Materials like Titanium, Carbon; Dremel Cutting Tool Accessory; Made in USA 11-41502

  • Efficient and Smooth Cuts – Gyros Fiber Disk, Resin Fiberglass Reinforced Cut-Off Wheels are specially designed and formulated to cleanly cut Super-Tensile Strength materials. These Fiber Disk cutting discs are perfect for commercial, professional, and DIY production due to their minimal heat generation and thin cutting line. They are manufactured in the USA and can work at a maximum speed of 45,000 RPM..
  • Double Reinforced, High Quality – Our cutting discs have high efficiency, unparalleled strength, and flexibility, and are long-lasting and break-resistant thanks to a specially developed fiberglass abrasive with a double reinforced structure. Gyros Fiber Disk ST Multi-Set is a must-have for Professionals and Hobbyists looking for the finest rotary tool accessories for Dremel and other top brand rotary tools..
  • Super Tensile Strength – Gyros ST mini cutting discs are particularly designed to cut Stainless Steel, Titanium, Carbon, Nickel, and Chrome Alloys. The abrasive is properly and perfectly matched to the materials being cut, the cutting action is superior. Other formulations are LT – stands for Low-Tensile Strength materials such as wood, plastic, stone, ceramic, aluminum, copper, brass, and glass. HT – refers to materials with High Tensi....
Check Stock

GYROS 1.75” Mini Resin Cut-Off Wheels for Rotary Tools; 2 Double Fiberglass Reinforced Cutting Discs; Super-Tensile Materials like Titanium, Carbon; Dremel Cutting Tool Accessory; Made in USA 11-41702

  • Efficient and Smooth Cuts – Gyros Fiber Disk, Resin Fiberglass Reinforced Cut-Off Wheels are specially designed and formulated to cleanly cut Super-Tensile Strength materials. These Fiber Disk cutting discs are perfect for commercial, professional, and DIY production due to their minimal heat generation and thin cutting line. They are manufactured in the USA and can work at a maximum speed of 42,000 RPM..
  • Double Reinforced, High Quality – Our cutting discs have high efficiency, unparalleled strength, and flexibility, and are long-lasting and break-resistant thanks to a specially developed fiberglass abrasive with a double reinforced structure. Gyros Fiber Disk ST Multi-Set is a must-have for Professionals and Hobbyists looking for the finest rotary tool accessories for Dremel and other top brand rotary tools..
  • Super Tensile Strength – Gyros ST mini cutting discs are particularly designed to cut Stainless Steel, Titanium, Carbon, Nickel, and Chrome Alloys. The abrasive is properly and perfectly matched to the materials being cut, the cutting action is superior. Other formulations are LT – stands for Low-Tensile Strength materials such as wood, plastic, stone, ceramic, aluminum, copper, brass, and glass. HT – refers to materials with High Tensi....
Check Stock

3M 3M Hand-Masker Paper Blade, 9-Inch

  • Cuts Masking Paper For Use With 3M(Tm) Hand-Masker(Tm) System Tools (M1000-Sb) Durable Stainless Steel Blade 9″ Blade Cannot Be Used For Cutting Film, Paper Only.
  • For Use With 3M(Tm) Hand-Masker(Tm) System Tools (M1000-Sb).
  • 9″ Blade Cannot Be Used For Cutting Film, Paper Only.
Check Stock

OSCARBIDE 1/2\ Shank Nickel Plated Indexable Lathe Turning Tool Holder 7 Pieces/Set,CNC Heavy-Duty Metal Lathe Cutting Tools for Turning Grooving Threading Parting Cut Off Holders Set

  • ...t (SWGCR 3/8-2.5), one 62.5° bit (SDNCN 3/8-2), one flat threading bit (SER 3/8-2) and one grooving bit (MGEHR 3/8-2). Recommend for CNC and traditional milling machines..
  • ❤Turning Holders are made of high quality steel with Nickel Cotated, which are more durable moistureproof, dust-proof than general metal lathe cutting tools. The set is used for semi-finishing/roughing steel , metal , great for turning, grooving or threading..
  • ❤Each tool holder comes with a TiN Coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action. And swap out or rotate the indexable carbide tips to maintain a sharp and precise cut..
  • ❤Metal lathe accessories designed for easy material removal, perfect for aluminum, brass, bronze, cast iron, steel, stainless steel, plastic, titanium and more.The entire set is contained in a premuim aluminium storage case that protects and organizes each tool and stacks and stores easily..
  • ❤TJATSE is a leading manufacturer of production cutting tools for industry. Our goal is to provide to our customers cutting tools that are On Spec and On Time and that are made to your exacting specifications. We will provide you 100% satisfaction guarantee..
Check Stock

360 Rotating Craft Cutting Tools Set, 2 Pieces Specialty Cutting Tools with 6 Pieces 360-Degree Rotating Carbon Steel Replacement Blade and Cutting Mat for DIY Craft Scrapbooking Stencil Supplies

  • Craft cutting tools: there are 2 pieces of cutting tools in black and blue, each cutting knife equipped with 3 pieces of 360-degree rotating blades (15 degrees+30 degrees+45 degrees), which can meet your many DIY needs as a nice tool for all kinds of creative paper-cutting activities.
  • 360-degree rotating blade: the stainless steel craft knife comes with 360-degree rotating blades that are machine punched and embossed, which enable you to cut very complex shapes and get the pattern you want easily and quickly.
  • The pointed blade makes it easier to use in common paper, card stock.
  • Quality material: the art precision cutting tool is made of quality stainless steel with an incisive tip, specially designed with an anti-slip grip plastic handle to reduce fatigue, comfortable and flexible to operate, can compatible with all punching and embossing machine.
  • Easy to use: the stainless steel art cutting tool with a 360-degree rotating blade and non-slip handle is as easy to use as a pen, make you achieve your own cutting effect faster and more effectively, but are is recommended for children under the age of 10 years.
  • Wide rang of use: with the stainless steel craft knives, you can use them for cutting paper, vinyl, DIY art works, stencil-making, planner stickers, g....
Check Stock

Lathe Boring Bar SNR0012M11+SER1212H11 Turning Tool Holder Lathe Internal Threading Inserts with Turning Inserts 5pcs 11ER AG60+5pcs 11IR AG60 Carbide

  • 【CNC Threading Inserts】: 16ER AG60 carbide inserts length: about 16 mm.
  • 5pcs/pack with a plastic box for convenient storage. Used for turning and finishing on a wide range of materials..
  • 【Advanced PVD Coating】: Made of solid carbide with high performance PVD coated, which has excellent wear resistance and smooth on face, so it can offer long tool life and faster cutting..
  • 【Accurate Threading】: Professional chip-breaker design, provides perfect cutting performance and high accuracy. Also Smooth rake face design makes the chip removal more fluency..
  • 【Widely Application】:Tungsten carbide threading inserts good for Low carbon steel, medium-carbon steel, high carbon steel, alloy steel , adjusting quality steel, stainless steel, cast steel, cast iron, aluminium alloy and copper alloy machining..
  • 【Satisfaction Guarantee】:TJATSE is a leading manufacturer of production cutting tools for industry. Our goal is to provide to our customers cutting tools that are On Spec and On Time and that are made to your exacting specifications. We will provide you 100% satisfaction guarantee..
Check Stock