Best Slot Punch

SHARME 3 Way Corner Rounder Punch 4mm 7mm 10mm 3 in 1 Corner Rounder for Paper Crafts Cardstock Laminate Photocards Business Card DIY Projects Scrapbooking and Card Making

  • 【3 WAY CORNER ROUNDER PUNCH】This 3 way corner punch is a simple way to round the corners of scrapbook, photos, cards, invitations and other paper....
  • 【ROUNDED CORNERS IN THREE SIZES】Give your paper craft projects an elegant finishing touch with this three way corner rounder punch. Ideal for....
  • 【EASY TO USE PAPER CORNER CUTTER】Choose your desired material and place it into the right slot according to the size you prefer. Simply push the....
  • 【WIDELY APPLICATION CORNER PUNCH】The rounded corner punch is comfortable and easy to use, great for beginners as well as experienced crafters. It....
  • 【COMPACT AND STURDY DESIGN】This compact corner rounder punches 4 mm, 7 mm and 10 mm corner radiuses, which are great for any size project. Its....
Check Stock

Kalolary 2Pcs Drip Irrigation Tubing Hole Punch, Drip Tube Hole Punch Tool Outdoor Drip Irrigation Pipe Hand Punch for 16/20mm PE Pipe Opening Hole Punch

  • Sturdy and Durable - Made of high quality plastic, this punch is durable, stable and rust. And the puncher has been polished so it will not become dull and can be used for a long time..
  • Size - Suitable for PE pipes with a diameter of 16/20/25mm, punches holes measuring 3 mm (0.118 Inches), proper size can make sure that sprinklers can snug fit on the tubing for minimizing waste..
  • 2-In-1 Punch and Fitting Insert - Our irrigation tool kit is suitable for both drip tubing punch and 1/ 4 fitting insertion use,ergonomic design, easy to operate..
  • How to use - Simply press the tool through the tubing and then remove the punch tool with a pre-punched hole left.
  • Insert the fitting into the tubing, then slide the tubing according to the slot and push the fitting into pre-cut hole.
  • Package - You will receive1 professional punch tool, 1 2 in 1 punch and accessory inserts. Good tools for gardening and irrigation,sufficient quantity for your daily using..
Check Stock

Hole Punch 2" Reach 1/4 inch Single Hole Punch,Heavy Duty Hole Puncher Single,Paper Punch Portable Hand Held Long Hole Punch for Paper Cards Plastic Cardboard (Silver) (1/4"-6mm Hole)

  • Heavy Duty Single Hole Punch:Stamping type structure design Easily punched paper or PVC materials.You can use this paper hole punch to punch a clean 1/4 in round hole.Applies to cards up to 0.08in thick.Recommended that the thickness of the material to be punch does not exceed: Hard card material 0.04in/1.0MM,Paper material 0.06in/1.5MM,PVC material 0.06in/1.5MM.A maximum of 15-20 A4 sheets can be punch at a time..
  • 1 Hole Punch:Ultra-distance paper entry is 2.09in/53MM,that is, the center of the hole is exactly 2.09in/53MM from the edge.It can be punch anywhere on business cards or 6-inch photos.The overall size is about 5.90 x 3.35 x 0.98 inches,the size fits you in your hand and is easy to carry,you can use this easy-to-use tab punch anywhere..
  • Hole Puncher Single Unique Paper Waste Collection Slot:Collect the scraps of paper punching, so that the scraps of paper do not fly, easy to clean up. Will not mess up your desk and floor, for your use to bring convenience..
  • Badge Punch:Our hole puncher is made of zinc alloy with chrome plated surface to make it shiny and beautiful.The perforated punch is hardened by heat....
Check Stock

Parts Express Nickel Plated Nibbling Tool

  • Simply drill 3/8" hole insert cutting head and compress handles..
  • Gives you the ability to make square holes for fuse holders, special connectors displays etc..
  • Material to be nibbled is placed in the gap between the punch and blade channel..
  • By squeezing the handles together, the punch will move down into the channel, cutting out a slug of metal..
  • A scribe line can be followed by looking down on work in this position. A slot is cut by making successive cuts..
Check Stock

2 Pieces Tag Punch Corner Cutter 3 in 1 Corner Paper Punch Rounder Tag Shape Lever Action Craft Punch for Present Making DIY Crafts Projects Photo Cutter Card Making Supplies

  • What you will receive: package comes with 1 piece of 3 in 1 corner rounder punch and 1 tag shape lever action craft punch, 2 different styles of punch....
  • Size details: the compact corner rounder cutter is designed with 4 mm, 7 mm 10 mm corner radius, which are nice for paper craft projects.
  • Durable to use: the corner rounder punch is made of quality plastic shell and stainless steel cutting blade, the sturdy and durable plastic shell is....
  • Easy to use: select the required material and put it in the slot, simply push the corner of the paper inward until it is correctly placed on the....
  • Widely applied: the round paper punch can cut a clear cut from card paper, scrapbook paper, kraft paper, etc., suitable for cutting paper, photos,....
Check Stock

ABN Hole Transfer Punch Set for Steel, Wood, Etc – SAE Transfer Set – 28 Piece Transfer Punch Set 3/32 to 17/32in

  • ELIMINATE GUESSWORK: Use the ABN | 28-Piece Transfer Punches Set 3/32-Inch to 17/32-Inch to remove the guesswork of where to place the center punch mark in a hole when transferring dead center from threaded, drilled, tapped, and reamed holes.
  • For toolmakers, machinists, fabricators, and hobbyists to use on metal, wood, and other surfaces.
  • Useful for a tool for die marker or repair, finding rifle stock screw and bolt hole locations, and even rock painting.
  • PERFECT SIZES: 4-7/8-inch (12.4cm) length of each punch with 0.0025-inch undersize for easy use.
  • Standard imperial SAE sizes include 3/32”, 7/64”, 1/8”, 9/64”, 5/32”, 11/64”, 3/16”, 13/64”, 7/32”, 15/64”, 1/4”, 17/64”, 9/32”, 19/64”, 5/16”, 21/64”, 11/32”, 23/64”, 3/8”, 25/64”, 13/32”, 27/64”, 7/16”, 29/64”, 15/32”, 31/64”, 1/2”, 17/32”.
  • BUILT TO LAST: Constructed from heat-treated tempered steel with a black oxide finish for maximum strength and longevity that resists corrosion and prevents rounding, mushrooming, or chipping of the conically-shaped (cone) tips.
  • Flat ends are slightly chamfered at the edge.
  • We recommend using these pieces as transfer punches – not intended to take place of a center punch.
Check Stock

Mudder 3 Pieces 2-in-1 Drip Irrigation Hole Punch Tool Drip Tube Hole Punch Fitting Insertion Tools for 1/4 Inch Fitting Emitter Insertion Drip Sprinkler Systems

  • What you get: you will receive 3 pieces of drip irrigation tubing hole punches in total, come with bright blue colors, sufficient quantity for your daily using.
  • Durable to use: the drip tube hole punch is mainly made of quality plastic material with material which is not easy to get corroded, sturdy and long lasting use, will bring you a nice using experience.
  • 2-In-1 punch and fitting insert: our irrigation tool kit is suitable for both drip tubing punch and 1/ 4 fitting insertion use, it can help to punch the proper hole for easier operation.
  • About size: the punch hole measures approx. 3 mm/ 0.118 Inches, proper size can make sure that the pressure in the drip system is suitable and won't waste your materials.
  • Please confirm whether it meets your needs before buying.
  • How to use: simply press the tool through the tubing and then remove the punch tool with a pre-punched hole left.
  • Insert the fitting into the tubing, then slide the tubing according to the slot and push the fitting into pre-cut hole, very convenient and easy to use.
Check Stock

STOBOK Metal Hole Puncher Two Holes Punch Craft Hole Punch for Office School Home

  • Brand new and high quality metal slot hole punch puncher..
  • Spring action provides extra strength, for easy operation. It is with comfortable design for easy punching and less hand fatigue..
  • Advanced cutting dies punch through up to 30sheets of paper.
  • Made of sturdy steel, this product is built to last.
Check Stock

LoveInUSA Punch Craft Set, 10Pack Hole Punch Shapes Craft Hole Punch Scrapbooking Supplies Shapes Hole Punch Flowers Butterflies Great for Crafting & Fun Projects

  • Super Value Pack - Our paper punches for crafting come with 10 popular cut-out shapes featuring snowflake, music,star, butterfly, umbrella, rose, heart, maple leaf, crown, and four leaf clover. There always some patterns are your favorite..
  • Children Safe and Friendly - Our kids hole punch is suitable for kid's small hands. The spring-operated punch is easy to use. A narrow slot to avoid hurting your little one's fingers. 100% children-safe. Even a baby can effortlessly press the botton and cut the paper..
  • Let Your Imagine Fly - Our shape hole punch is perfect for kids to inspire their creativities, with their favorite patterns. Suitable for nail decoration, scrapbooking supplies, photo albums, envelopes, greeting cards, gift wrapping and other paper craftings..
  • Precise Punching - The sign on each puncher allows you to easily find the shape you want. Make this puncher upside down to find out where you want to punch and get a perfect and precise shape. More space for cut-outs to avoid missing..
  • Premium Quality - Our kids hole punch is made of high-quality metal and plastic, and can punch out the paper cleanly without damaging the edges of the paper. You can use plain paper, EVA foam, aluminum foil, kraft paper, etc. It is recommended to use paper with....
Check Stock