Best Skil Multi Functional Laser Level

Huepar Multi-Line Green Laser Level Cross Line 360° Floor Horizontal Plus Vertical Lines with Plumb Dot, Self-leveling Laser Tool - Rotating Base, Lifting Base, Li-ion Battery&Hard Carry Case LS11G

...e projected through the 5/8" thread, and the micro rotary knob enables users to make 360°adjustment. With the lifting base, the 360° floor laser can raise from the surface to project over and travel past uneven surfaces or obstructions between 1" and 3.5" height..
⭐BRIGHTER GREEN LASER & OUTDOOR PULSE MODE: This multi-Line laser level adopts the bright Osram’s green laser unit, which is resistant to temperature changes and has higher stability. At the same power, the green laser is twice bright as the red laser, with a working range up to 98 feet (300LUX) of accuracy within ±1/9 Inch at 33 Feet. The outdoor pulse mode can be activated by pressing the Pulse Mode Button, allowing to extend the laser range up to 197 feet with Huepar Line Laser Detector..
⭐CONVENIENT AND INTELLIGENT DESIGN: Short press H and V to switch the laser lines, users can select the individual and combined laser lines individually depending different on job site applications. With our smart pendulum system, this laser level tool self-levels and indicates out-of-level condition while pendulum unlocked. Once pendulum locked, it switches to manual mode to lock lines for use at any angle..

Check Stock

T POWER 7V Charger Compatible for Skil 2350 2346 2352 F012235000 2350-01 F0122350AA F012235DAA 2350-01-RT Robert Bosch Tool Corp Model: 2607225503 Screwdriver Ac Dc Adapter Power Supply

T-Power Made with Brand-new Input Voltage Range: AC 100V - 240V - ( Compatible with 6V ~ 7V ~ 8V Batteries ).
Compatibility: Skil 2350 F012235000 2350-01 F0122350AA F012235DAA 2350-01-RT Robert Bosch Tool Corp Model: 2607225503 3.6V 4V 4.8V Li-Ion Screwdriver , Skil 2346 F012234600 iXO2 3.6-Volt iX02 2346-01 Skil IXO3 F012234602 IX03 Max iX0 F012235400 FO12235400 F012235401 FO12235401.
Skil Power Tools 2352 2352-01 F0122352AA F012235200 2352-02 F0122352AB F0122352AC 2352-01-RT 235201 235202 Lithium-Ion 4V Cordless Mulit-Cutter Tool 4 Volt 4.0 V Li-ion Cutter.
Skil 2350 F012235000 2350-01 F0122350AA F012235DAA 2350-01-RT.
Skil 2346 F012234600 iXO2 3.6-Volt iX02 2346-01 2352-01 2352-02 IXO3 F012234602 IX03 iXO , Skil 2354-04 2354-06 2354-01 2354-02 2354-05 2354-08 2354-10 2354-07 iXO 235404 235406 235401 235402 235405 235408 235410 235407 4V 4 Volts 4V DC 4VDC 4.0V Lithium Ion Palm Sized Cordless Screwdriver.
⚠️ ( Please Note ! that the " Skil Li-Ion Screwdriver " available in a number of different Models Number , Please Make sure Your Model or P/N : Match this Listing , Thank you..

Check Stock

SKIL 3821-01 12-Inch Quick Mount Compound Miter Saw with Laser

Laser cutline guide for fast and accurate cuts.
9 positive stops for setting common miter angles.
Table extension with left/right extension rails for long, large work pieces.
Quick-mount system for quick and easy setup on SKIL miter saw stand (3302-02).

Check Stock

Huepar Cross Line Laser Level, Green 360° Horizontal and Two Vertical Lines, Self-Leveling Alignment Multi Line Laser Tool, Li-ion Battery with Type-C Charging Port & Hard Carry Case Included - B21CG

⭐【1H / 2V Multi-line Laser for Wide Application】: The laser level B21CG projects 360° horizontal line and two 120° vertical lines cover the floor, wall, ceiling around the room. The individual and combined laser lines can be selected individually depends on job site applications. With our smart pendulum system, this laser level tool self-levels and indicates out-of-level condition while pendulum unlocked. Once pendulum locked, it switches to manual mode to lock lines for use at any angle..
⭐【Dual Power Methods & Type-C Charging Port】: Huepar B21CG Laser Level employed a large capacity of 3.7V / 5200mAh lithium battery and provides up to 8 hours of running time. The lithium battery comes with a Type-C charging port that can be charged separately. When taking out the battery, the laser tool can be used at the job site by plugged in. 4 battery indicators on the keypad allow users to know the current battery volume and charging protection helps prevent from overcharging..
⭐【Brighter Green Laser & Outdoor Pulse Mode】: This cross line laser adopts the bright Osram’s green laser unit, which is resistant to temperature changes and has higher stability. At the same power, the green laser is twice bright as the red laser, with a workin....

Check Stock

Huepar Fine-tuning Bracket Laser Level Adapter, Multifunctional Magnetic Pivoting Base with Adjustable Clip, 360° Adjustable Support with 1/4\-20 Male Threaded, Height Adjustment - PV10+

...: The bracket with 1/4"-20 male thread, the maximum depth from the 1/4''-20 thread to the back of the bracket is 8.5cm. It is compatible with most cross line laser levels with 1/4" female thread. If your laser level has a 5/8" female thread, please purchase the conversion screw adapter AD5/8 separately..
⭐【Multi-functional Auxiliary Back Clip】: A separate back clip included in the kit is compatible with most magnetic bases on the market, increasing the adsorption force of the magnets and stability. The Back Clip offers the ability to mount to any object up to 5cm thick. The vertical angle against the wall can be adjusted by the fine-tuning knobs as well as the opening size of the clip. A nail hole in the clip enables to be fixed firmly on the wall..
⭐【Multi-directional Fine-tuning Bracket】: There are four fine adjustment knobs on the bracket, help to adjust the left and right position within 3cm, the front and back position within 5.5cm, the height within 9 cm, and the horizontal rotation 360°. An added locking knob enables to fix the working height and avoid sliding up and down. The graduations are marked in inches and centimeters for easy readouts..
⭐【Multiple Installation Methods of the Bracket】: 1/4"-20 and 5/8"-11 female thread m....

Check Stock

ADVNOVO 3000mAh 18V SB18A Battery for SKil 18V Battery SB18A SB18C SB18B 18V Slide Pack Battery Replacement for Skil 18V Ni-Cd Battery 2888-10 7305-01 5995-01 9350-01 4570-01

✎Type: Ni-MH✎Voltage: 18V✎Capacity: 3000mAh✎Wattage: 54Wh.
『Compatible Charger Model』For skil 18 volt battery compatible with Skil original charger SC118 (SKU 310042) and SC118C-LI battery charger..
『Replacement Battery Model』Replacement for Skil 18V Ni-Cd slide pack battery SB18C, SB18A, SB18B, 2610012349/1619X04714..
『Compatible Tools』For skil SB18A battery replacement compatible with Skil 18 volt Ni-Cd tools, such as for skil circular saw, drill driver, reciprocating saw, flashlight, sander, jigsaw, recip saw. For Skil 18V Ni-Cd cordless tools 2887, 9350, 5850, 2810, 2888, 2895, 2897, 2898, 4570, 5995, 7305, 2860, 2888-10, 7305-01, 5995-01, 9350-01, 4570-01, 2887-B5, 2887-O5, 2887-B2, 2887-B4, etc..
『Guarantee』30 days money back and 12-month warranty guarantee, Any problem, Please feel free to contact us. Contact us: any question click the "Ask a question" on our storefront or in "YOUR ORDER" options click the "contact seller"..

Check Stock

Twotrees Laser Engraver TR2 Pro 4 in 1 Rotating Module for Engraving Cylindrical Objects, Wine Glass, Tumbler, Ring,Y-axis Rotary Roller Module for TTS-25,TTS-55,TS2 Laser Engraving Machine

...aser engraver machine is a high-precision and easy-to-use product designed for the engraving needs of laser engraving enthusiasts, designers, small and micro enterprises, and carpenters.By using laser engraver and this rotary module to achive all of your creativity..
Multi-functional: an engraving module that integrates four engraving functions: roller rotary, chuck rotary, sphere rotary, ring rotary. It can meet the clamping and engraving of various special-shaped workpieces, and solve the engraving needs of most users.
Such as wine glass, yeti tumbler, baseball bat, ring, ball, or mug with handle..
Highly Precise Engraving ： High-precision engraving can be achieved with different components. TR2 Pro Laser can hold the object tightly with a soft-pad covering jaws chuck, allowing smooth and efficient operation. The maximum vector engraving speed can reach 360°/s. The laser rotary module packs a precision stepper motor with a minimum angle of 0.45°, amazing detail on the engraving of the Chuck Rotary..
Wide compatibility : Default 80CM two types of motor adapters are suitable for different types of engraving machine inter....

Check Stock

Bosch Bluetooth Enabled 330-Foot Lithium-Ion Laser Distance and Angle Measurer GLM 100 C

UPGRADES: Features Bluetooth functionality to conveniently transfer and store measurements from the laser measurer to a smart device via free app. Also includes backlit display with tilt-screen technology for easy viewing in all directions..
PRECISION: The laser tool’s Precision Measuring Technology with extreme accuracy measures distances up to 330-feet to within 1/16-inch..
ACCURACY: The Bosch GLM 100 C features a built-In tilt sensor to displays 360-degree angle measurements in two axis allowing for more accurate measurements..
LEVEL: Option to add the R 60 digital level attachment to transform the GLM 100 C into a 24-Inch digital laser level (not included)..
VERSATILE: Offers ten measurement modes including length, area, volume, angle, min/max, continuous, single indirect height, single indirect length, combined indirect height, and multi-surface are measurement for maximum versatility..
Class IIa laser product, ≤1mW power output.

Check Stock

Superior Electric SW77 Aftermarket 20 Amp Trigger On-Off Switch Replaces Skil 2610321608, Ryobi & Ridgid 760245002

Skil Saw Replacement Switch replaces Skil 2610321608.
Trigger type switch with 4 internal terminals.
For Skil HD77 and HD77M Worm Drive Skil Saw.

Check Stock