Best Scope Mount For Ar1flat Top

Sks, Aks, Ak-47 Owner's Manual

【Light-weight & Metal Side Rail Mount】：RTMGOB side rail mount, made of premium aluminum alloy, CNC-machined, finished and anodized, solid and durable to mount on 47 model.
【Quick Detach Side Scope Mount】:The side scope mount can be quick detached from side plate receiver. Desiged with a quick-detach lever and spring-loaded adjustment part. Press on the lever button lower part for quick unlocking the mount while move the lever to another side. Then press the spring-loaded part and roll out the screw to detach the scope mount, no tools needed.
【Side Picatinny Rail Mount】: The side mounted rail is standard picatinny rail for mounting red dot, sights, optic scope, flashlight, and other tactical optic accessories. The side rail mount has 17 rail slots and 8 drilled holes, covenient for mounting red dot scope, and allows sight cowitness.
【Easy-to-mount Side Mount】: The scope mount can be easily mounted on 47 model. Before mounting, pull the lever upward, slide onto the side plate, tighten the scope mount by pressing the spring-loaded part and rotating the screw to adjust tightness, and finally push the lever to the right to lock the mount. The mount once settled stably and tightly, would not slipping off and shaking.

This is a 1″ inch one piece riflescope rings. Mounting rings are pushed forward 2″ for better eye relief..
ADE Cantilever Mount was designed by the experienced merchandise experts and ADE is able to get it from OEM manufacturer to sell at a fraction of cost compare to other brands where purchase this same mount and resale for a lot higher.
Our 3-bolt clamping systems with over 6,500 lbs of clamping force hold your scope firmly to the rail. Relief cuts designed into the scope tube bearing surfaces prevent scope pinching and ensure clamping forces are evenly distributed along the top and bottom of the scope body..
The Mount has no protruding levers, bolts, or knobs to rap your knuckles, or get caught on clothing, gear, and surroundings.
Height” 1.5″. Weight 6oz. Screw Torque – 15 in-lbs. We are so confident in these mounts they are covered under our excellent Lifetime Warranty..

✔Double dovetail rings for 3/8’’ or 11mm dovetail mount specialized scope mount for .22/Airgun..
✔ The dovetail ring is for most scopes which are in 1''/ 25.4mm scope tube..
✔ High profile, 20.4mm(0.8 in) from top of the dovetail rail to bottom of rings ( Item height: 1.9'')..
✔ Built-In Tape Inside Per Rings To Prevent From Marring The Scope, Also Prevent Sliding and Holding Postion Accurately..
✔ With two rail clamp screws and two scope clamp screws, Precision and Repeatable Alignment..

This is a 30mm one piece riflescope rings. Mounting rings are pushed forward 2" for better eye relief..
ADE Cantilever Mount was designed by the experienced merchandise experts and ADE is able to get it from OEM manufacturer to sell at a fraction of cost compare to other brands where purchase this same mount and resale for a lot higher.
Our 3-bolt clamping systems with over 6,500 lbs of clamping force hold your scope firmly to the rail. Relief cuts designed into the scope tube bearing surfaces prevent scope pinching and ensure clamping forces are evenly distributed along the top and bottom of the scope body..
The Mount has no protruding levers, bolts, or knobs to rap your knuckles, or get caught on clothing, gear, and surroundings.
Height" 1.5". Weight 6oz. Screw Torque - 15 in-lbs. We are so confident in these mounts they are covered under our excellent Lifetime Warranty..

✔ Double dovetail rings for 11mm dovetail mount specialized scope mount for .22/Airgun..
✔ One of the dovetail mounts features a stop pin, for rock solid application. Adopt anti-oxidation and anti-corrosion coating treatment..
✔ Medium profile, 15mm(0.6 in) from top of the rail to bottom of scope rings ( Item height: 1.6'')..
✔ The dovetail ring is for most scopes which are in 1''/ 25.4mm scope tube..
✔ With two rail clamp screws and four scope clamp screws, Precision and Repeatable Alignment..

Dual ring scope mount available for standard 1 inch or for 30 mm tube scopes tubes.
Scope mounts come with an integrated level bubble mechanism for quickly checking if your rifle is lined up square with your target.
Mounts to any flat top Picatinny rail equipped rifle platform.
2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position.
Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount.

❖Heavy Duty:4 screw design with cut for weight reduction,weaver base mount with 2 top Slots Medium profile..
❖Fit to All 20mm Rail:Tactical mount ring Medium profile with spirit level,1‘’/24.5mm diameter fit most scope and tactical flashlight..
❖SeeThrough Design:See through design allow you to aim with the rifle's iron sight even with a scope installed..
❖Exquisite Workmanship:Precision machined from aircraft-grade aluminum alloy with anodized black matte finish..
❖Easy to Install:With only 1 rail clamp screw and 1 scope clamp screw per side, just twist off the nut and mount the base on the 20mm rail easily..

Titanium Alloy Scope Rings: Made of titanium alloy and precision-machined aircraft-grade 6061 aluminum alloy. Titanium alloy mounting part is high solidity, shockproof, anti-shake, anti-corrosion, and wear resistance. A reliable material to make sure your scope is precisely and firmly mounted on Picatinny rail..
30mm & Medium Profile: Set of 2 scope rings are both 1.18 inch/30mm diameter. 40in/Ibs ring torque, 2 screws for rail clamping, and 4 screws on top to ensure your rifle scope reaches alignment. Mount on rail easily, stay aligned, and without any wobble. Removed or installed quickly by using Allen key..
Rings for Picatinny Rail: The optic rings fit for standard Picatinny rail. The recoil control key holds the scope rings perfectly still and will not shift or move under fierce recoil. By utilizing titanium alloy on the clamping base, the scope rings achieve a way longer service life than similar scope rings and work perfectly under extreme environments..
Professional Choice: The scope mount rings are heavy duty style yet lightweight so that it withstands heavy recoil and does not add up extra weight. Each ring is about 81g. Perfect for outdoor hunting, tactical and precision target practice..
2-Piece Scope Rings Design: Different rifle scope has a ....

Picatinny/Weaver rail mount built specifically for Marlin 336/1894/1895 Series lever action rifles.
Scope mount installs directly to receiver via the factory mounting holes and included set screws with no additional hardware required.
Allows for the mounting of Picatinny or Weaver standard scope rings, scope mounts, red dots, or other optics.
Available in two styles - a 0 MOA mount for zeroing your scope at short to mid range distances and a 20 MOA mount for zeroing your scope at long distances.
All Monstrum scope mounts and accessories come with a lifetime guarantee.