Best Sata Raid Cards

ICY DOCK 8 x 2.5 SAS/SATA HDD/SSD Moblie Rack Enclosure for 5.25' Bay (2 x Mini-SAS HD) | ToughArmor MB998IP-B

  • Rugged Heavy duty full metal construction with commercially designed for medical &military systems, media servers, workstation, HPCs and IPCs, approved & used by Tier 1 companies.
  • Fits 8 x 5mm to 7mm 2.5” SATA hard drives or SSD’s in a single external 5.25” bay for high performance RAID applications.
  • Connected by 2x Mini-SAS HD data cables for all 8 bays, for plug-and-play compatibility with most motherboards and RAID cards.
  • Requires only 2 x 15pin SATA power connectors to power all 8 bays (drives).
  • Supports SAS12Gbps (single channel)&SATA 6Gbps and hot-swap.
Check Stock

Intel Integrated RAID Module Storage Controller RMS25KB040

  • This RAID controller has four internal SAS/SATA ports and uses a x8 or wider PCI Express* server board slot.1.2 Operating System Support Supports SAS/SATA devices at speeds up to 300 MB/second per port Supports the SATA II protocol over SAS transp.
  • Contains four internal SAS/SATA ports Supports up to 8 SAS/SATA II devices via expanders Supports up to 64 virtual disks Supports up to 8 arrays Supports RAID levels 0, 1, 5, 6, 10, 50, and 60 Hardware exclusive OR (XOR) assistance.
  • Online capacity expansion Online RAID level migration Physical drive roaming RAID controller migration Fast virtual drive initialization Hot-spare drive configuration, both private and global.
  • SATA drive hot-plug Staggered spin-up Native command queuing Support for SMART* Auto rebuild Variable data stripe size configured per virtual drive.
  • 128 MB of ECC DDR2 667 MHz SDRAM integrated on the controller Read and write cache policy SES2 intelligent enclosure support PCI hot-plug support Background media test (patrol read) Background data integrity test.
Check Stock

StarTech.com Dual M.2 SATA Adapter with RAID - 2x M.2 SSDs to 2.5in SATA (6Gbps) RAID Adapter Converter with TRIM Support (25S22M2NGFFR) Black/Silver

  • Install two M.2 SSDs into a 2.5” bay to create high-performance storage with configurable RAID.
  • Dual M.2 SATA adapter with RAID supports SATA I/II/III (up to 6Gbps).
  • 2x M.2 SSDs to 2.5in SATA (6Gbps) RAID adapter converter with 2.5in SATA form factor housing, provides TRIM support.
  • Dual M.2 SSD adapter enclosure with RAID 0 and RAID 1 plus Spanning and JBOD.
  • Broad compatibility with support for common SATA M.2 SSDs (2230, 2242, 2260, 2280) (Not compatible with M.2 NVMe or AHCI PCI-Express SSDs).
Check Stock

Adaptec RAID 71605 Storage Controller 2274400-R

  • ▶【8 Ports SATA 3.0 Adapter Card】: Acasis SATA card is equipped with 8 SATA 3.0 interfaces and supports the simultaneous connection of 8 SATA hard disks, the transfer speeds up to 6Gbps, You could add 8 6Gb/s SATA 3.0 devices to your computer with this PCIe SATA card.
  • ▶【Easy to Install】: PCIe to SATA 3.0 Host Controller Card with a standard profile Bracket, PCIE Gen 2 X1 interface design, will works on PCIE X1, X4, X8, X16 slot, compatible with most size chassis on the market. Users need to check if PCs or Servers have at least one PCIE X1 slot on mother board before purchase.
  • ▶【80TB Expansion】: 8 Ports SATA 3.0 interfaces can expand to 80 TB, provide a high-volume database for your workstation and computer equipment. With using The chip JMB575+JMB1064 Chipset, improve this card more stable and compatible.
  • ▶【Supports Soft-RAID Mode】: The system comes with soft RAID and support four storage modes: RAID1 (SAFE Mode), AHCI1 (PM Mode), SPAN (BIG Mode) and RAIDO (FAST Mode). Supports Windows 7/ 8.1 / 10 / Linux, install the driver before add the HDD in system.
  • ▶【What You Get】 : 1 x 8-port SATA 3.0 controller card, 8 x SATA cable, 2 x SATA power splitter cable, 1 x user manual.
Check Stock

StorageTekPro LSI 9340-8i flashed to IT Mode = 9300-8i w/LSI P16 IT-Mode F/W for ZFS FreeNAS unRAID

  • The eight-port MegaRAID SAS 9240-8i, supports data transfer rates of up to 6Gb/s per port, brings new features and improved performance to entry-level server applications using up to 64 SATA or SAS devices..
  • RAID 0, 1, 5, 10, 50 and JBOD mode - Hardware RAID solution.
  • Hardware RAID solution x8 PCI Express 2.0 host interface Low-profile form factor Supports up to 64 physical devices Up to 16 physical devices in a RAID configuration Patrol read Consistency Check S.M.A.R.T error detection.
  • Solution Provided: Low-cost, green SATA+SAS RAID solution for high-density servers and workstations with the flexibility to use both SATA and SAS hard drives and solid state drives.
  • Selectable logical drive as boot drive Consistency Check Fast initialization for quick array setup Native Command Queuing Staggered spin up for SATA drives.
Check Stock

LSI 9240-8i 6Gbps SAS Raid Card, HBA FW:P20 9211-8i IT Mode for ZFS FreeNAS unRAID 2 SFF SATA RAID Controllers

  • The eight-port MegaRAID SAS 9240-8i, supports data transfer rates of up to 6Gb/s per port, brings new features and improved performance to entry-level server applications using up to 64 SATA or SAS devices..
  • RAID 0, 1, 5, 10, 50 and JBOD mode - Hardware RAID solution.
  • Hardware RAID solution x8 PCI Express 2.0 host interface Low-profile form factor Supports up to 64 physical devices Up to 16 physical devices in a RAID configuration Patrol read Consistency Check S.M.A.R.T error detection.
  • Solution Provided: Low-cost, green SATA+SAS RAID solution for high-density servers and workstations with the flexibility to use both SATA and SAS hard drives and solid state drives.
  • Selectable logical drive as boot drive Consistency Check Fast initialization for quick array setup Native Command Queuing Staggered spin up for SATA drives.
Check Stock

TERRAMASTER D5-300 USB3.1 Gen1 Type C 5-Bay External Hard Drive Enclosure Support RAID 0 RAID 1 RAID 5 RAID 10 Clone JBOD Single Disk Hard Disk RAID Storage Diskless

  • D5-300 is equipped with brand new USB 3.1(Gen1) type-C high-speed interface and compatible with Mac, Windows and Linux computers, and also works with the computers possessing the Thunderbolt 3 interface..
  • Up to 100TB storage capacity. D5-300 can support five (5) SATA hard drives, is compatible with 20TB 3.5 inch SATA hard drive, and has a total storage capacity up to 100TB ( in RAID0). Compatible with various hard drives including 3.5" SATA hard drives, 2.5" SATA hard drives and SSD. (Note: users need to purchase their own hard drives. HDD's are not included.).
  • Relying on the USB 3.1 Gen1 super speed protocol, the D5-300’s transmission speeds can reach up to 220MB/s (Tested with dedicated NAS drives 4TB RAID 0)..
  • Supports multiple RAID modes: RAID 0, RAID 1, RAID 5, RAID 10, CLONE, JBOD, and Single Disk. RAID 5 is recommended as the best option for D5-300, which balances between data security and storage capacity..
  • Various applications. Great for video editing, photo backup, storage of R&D technical documents, archival backup, music libraries, financial records, storage of video surveillance recordings and corporate data storage. Featuring an aluminum-alloy shell and low-noise fans, D5-300 is extremely solid and reliable with good heat dissipation ....
Check Stock

Qphone12 SATA PCI-E Adapter 10 Ports PCI Express X4 to SATA 3.0 6Gbps Interface Rate Expansion Card Controller for HDD ASM1166

  • [Efficient] - You could add four 6Gbps/s SATA 3.0 devices to your computer with the PCIe SATA card and 4 SATA cables. Backward compatible to 1.5 Gbps/s and 3 Gbps/s.
  • [High Performance] - The 4 port SATA controller based on Marvell 88SE9215 chip, more stable and wider compatible. Port Multiplier FIS-based and Command-based switching supported.
  • [Support System] - The SATA expansion card supports Windows XP/ 7/ 8/ 10/ Mac/ NAS/ Linux OS, no driver required. Support install Windows OS from Win10 PE.
  • [For All PCs] - Our PCIe to SATA III 4 port expansion card comes with a low profile bracket and 4 SATA cables, compatible with most chassis on the market. Fit for PCIe X1/ X4/ X8/ X16 slot.
  • [Please Note] - You could make the system to boot from this SATA card but non RAID. BUT If your motherboard has RAID function, you could make a RAID with this SATA card.
Check Stock

StarTech.com 2x M.2 NGFF SSD RAID Controller Card plus 2x SATA III Ports - PCIe - Two Slot PCI Express M.2 RAID Card plus Two SATA Ports (PEXM2SAT3422)

  • Add two Next Generation Form Factor M.2 SSDs and two SATA ports to your computer through PCIe.
  • 2x M.2 NGFF SSD RAID Controller Card plus 2x SATA III Ports / PCIe.
  • 2-Slot PCI Express SATA M.2 RAID Card / SATA 3 Controller Host Card Adapter.
  • PCIe SATA Card for almost all SATA M.2 solid-state drives plus port multiplier up to 7 drives.
  • Storage controller supports hardware RAID / NCQ / HybridDrives / SATA3 6Gbps.
  • Perfect for data recovery & backup / Improves the storage & performance of a PC.
Check Stock