Best Rockler Crosscut Sled

The Original Dubby Cut-Off • Cross Cut Sled for Cutting Precise Accurate Miters with a Table Saw Right Side Dubby Sled

  • THE ORIGINAL DUBBY SLED From standard 4 sided panel cutting to the absolutely stunning heptagon frame you will be completely accurate with the angles....
  • WORKING WITH LARGE PANELS The Dubby has the capacity to crosscut panels up to 24″ wide x 52″ long, and allows you to do them safely. Since the....
  • WORKING WITH ANGLES The Dubby angle scale is the simplest, most accurate and easiest to read scale available. Being about 15-20 times more accurate....
  • WORKING WITH SMALL PIECES- No miter gauge on the market can offer you the margin of safety provided by the Dubby Sled. The versatile hold-down clamp....
  • WILL THE DUBBY FIT YOUR SAW? The Dubby sled is compatible with most cabinet and contractor table saws. However, your table saw should fall within the....
Check Stock

18” Precision Steel Miter Bar Rail Runner with Adjustable Spring Loaded Plungers For DIY Table Saw Crosscut Sleds, Jigs and Fixtures to Slide in 3/4 inch by 3/8 inch Miter Slots

  • ...). There are also three counter sunk holes on the bar to mount the bar using #8 wood screws (not included)..
  • Once you mount the bars to your sled, jig or fixture you are sure to feel the difference. This is especially true when you first run the bars through your miter slots. The smooth sliding action is perfect for crosscut sleds, miter angle jigs, shop made coping sleds and a whole lot more! Using two bars (only one is included) for even more stability works exceptionally well..
  • The bar is approximately 18 inches long and will fit into miter t slots and u-shaped miter slots. Non-standard slots found on some job site style table saws and other small machinery will not accept this bar due to the non-standard slot dimensions. We recommend that you measure your miter slot before placing your order..
Check Stock

Rockler 24 Aluminum Miter Bar - Aluminum Bar for Smooth-Sliding Action on Table Saws Router Tables Workbenches & More – For any Standard 3/4 x 3/8 Miter Slot – Accessories for Table Saw

  • 24" Aluminum Miter Bar: The Rockler miter track bar allows you to set up your jigs for smooth-sliding action on table saws, router tables, bandsaws,....
  • Adjustment Screws: This solid aluminum miter bar has nylon set screws in the miter bar that adjust in or out for a perfect fit in any standard 3/4" x....
  • Great For? Our miter slider bar is great for shop-made crosscut jigs, cutoff tables, taper jigs, and more. Available individually in 18", 24", and 36"....
  • Easy Assemble: Our miter bar slider makes it very easy to construct that ideal jig without dealing with the wood runners and the swelling issues. This....
  • Extremely Durable: Our miter bars for the table saw are made of high-quality aluminum alloy that will be strong and reliable for several years..
Check Stock

POWERTEC 71403 Table Saw Crosscut Sled Woodworking Jig and Hardware Kit for Precise Cuts

  • INCLUDES: Crosscut Table Saw Sled kit comes with table base, MDF fence face, fence, flip stop, hold down clamp, miter bar and installation hardware to....
  • FEATURES: Easy to read 1/2° graduations, a hairline indicator for mistake free tablesaw setups, right edge zero clearance, and simplistic design for....
  • HIGH PRECISION CUTS: Complete with an integrated angled ruler to ensure you get the desired cut with accurate measurements.
  • ULTIMATE WOODWORKING JIG: Produces quicker, safer cuts for edge and detailing work projects requiring degree accuracy - Supports the material and....
  • PREMIUM DESIGN: Provides a large smooth sliding worksurface with an easy to read, accurate scale that produces high precision miters and repeatable....
Check Stock

The Original Dubby Cut-Off • Cross Cut Sled for Cutting Precise Accurate Miters with a Table Saw (Left Side Dubby Sled)

  • ...bby will allow you to make perfect cuts the first time you do them and keep your creative juices flowing with idea after idea. It is ideal for making frames but it also works very well for the cutting of tiny pieces while keeping your fingers out of harms way..
  • WORKING WITH LARGE PANELS The Dubby has the capacity to crosscut panels up to 24″ wide x 52″ long, and allows you to do them safely. Since the panels don’t make contact with the table saw top, “walking” of the material is virtually eliminated. This will allow you to cut perfectly square panels for your furniture and cabinet making projects quickly, easily and accurately..
  • WORKING WITH ANGLES The Dubby angle scale is the simplest, most accurate and easiest to read scale available. Being about 15-20 times more accurate than the average miter gauge, the scale has pre-determined lines for any shape (from 4 to 16 sides) you want to cut. This means no calculations, no hassles, and best of all, no test cuts for perfect results.
  • WORKING WITH SMALL PIECES- No miter gauge on the market can offer you the margin of safety provided by the Dubby Sled. The versatile hold-down clamp included with every Dubby will give you an extremely safe way to cut small pieces, and will easily pivot out of the way w....
Check Stock

The Original Dubby Cut-Off • Cross Cut Sled for Cutting Precise Accurate Miters with a Table Saw (Left Side Dubby and Right Side Dubby Sleds are Included)

  • ...bby will allow you to make perfect cuts the first time you do them and keep your creative juices flowing with idea after idea. It is ideal for making frames but it also works very well for the cutting of tiny pieces while keeping your fingers out of harms way..
  • WORKING WITH LARGE PANELS The Dubby has the capacity to crosscut panels up to 24″ wide x 52″ long, and allows you to do them safely. Since the panels don’t make contact with the table saw top, “walking” of the material is virtually eliminated. This will allow you to cut perfectly square panels for your furniture and cabinet making projects quickly, easily and accurately..
  • WORKING WITH ANGLES The Dubby angle scale is the simplest, most accurate and easiest to read scale available. Being about 15-20 times more accurate than the average miter gauge, the scale has pre-determined lines for any shape (from 4 to 16 sides) you want to cut. This means no calculations, no hassles, and best of all, no test cuts for perfect results.
  • WORKING WITH SMALL PIECES- No miter gauge on the market can offer you the margin of safety provided by the Dubby Sled. The versatile hold-down clamp included with every Dubby will give you an extremely safe way to cut small pieces, and will easily pivot out of the way w....
Check Stock

uxcell M4 Hanger Bolts Length 1\(25mm) Double Headed Bolts Self-Tapping Screw 4mm Wood Joint Furniture Legs 20pcs

  • All Rockler products come in Rockler branded packaging for quality and safe transport.
Check Stock

CROSS LAP JIG

  • Rockler’s Corner Key Doweling Jig: The Rockler hardwood dowels lets you join mitered corners by running dowels through the joint at 45°! Our corner key dowel jig’s exposed oval dowel end result is a unique decorative effect, and the dowels serve to strengthen the joint, much like splines..
  • Create Solid Wood Dowels: This drill jig for straight holes allows you to use solid wood dowels in a contrasting species, non-ferrous metal tubes, a combination of both, or even tie the joint together with leather laces. More advanced decorative effects can be achieved with our dowel joiner by double-drilling to create dowels with a multi-layered core..
  • Decorative Mitered Joints: This wood joiner jig creates beautiful, decorative mitered joints, and also strengthen mitered corners on boxes, drawers and more. Once set, the wood doweling hole drill guide tool can be easily moved and re-clamped to drill the next hole (clamps sold separately)..
  • Molded Reference Lines for Accuracy: The Rockler dowel jig has precisely molded reference lines and clear alignment window for fast, accurate setups. No other dowel drilling jig on the market offers the same functionality, repeatability, and convenience. Extended length bits are required..
  • Wooden Dowel Jig Includes: Our wood do....
Check Stock

Rockler Safety Power Tool Switch - Heavy-duty 15 Amp Power Switch - Stop Paddle to Quickly Shut off Power - Safety Switch for Router Tables or Workbench - Router Table Accessories

  • Rockler Router Table Switch: Just bump the "Stop Paddle" on/off switch, which is easy to find when you're in a tight spot, to quickly shut off power.....
  • “Stop Paddle” Table Saw Switch: This Rockler power tool switch mounts to Rockler steel shop stands or any other surface with screws. No more....
  • Hands-Free: This power tool safety switch helps you keep your hands on your work piece and not removing to hit a power off button. This stop button....
  • Easy To Locate: Locate our router switch near your hip or knee and you'll never have to take your hands off the work piece. The Rockler router....
  • Easy To Install: Several minutes tops that's all it takes. The start and stop router power switch is installed with the help of screws and can be....
Check Stock