Best Printing Speed For Ender 3

Creality Ender 3 Glass Bed Upgraded Build Surface Plate, 235x235x4mm

  • No Edge Curling - 3D printer coated glass bed, molds could stick on bed firmly without glue, avoiding the issue of print edges curling. A necessary 3d printer upgrade parts..
  • No-indentation Printing - Upgraded Ender 3 glass plate has a much smaller CREALITY logo than older version, avoiding leaving logo indentations on molds surface during 3D printing..
  • Excellent Flatness - Improved 3D printer glass plate provides more flat and more smooth build surface than magnetic mat or pei sticker, ensuring high flatness for the bottom of model..
  • Super Convenient - Very easy to take off the model, no tools needed. This borosilicate glass bed could be fixed with middle sized clips and cleaned with alcohol or acetone at room temperature..
  • Compatibility - The 3D printer parts is applicable with Creality 3D printer Ender-3, Ender-3 Pro, Ender-3S, Ender-3X, Ender-3 V2, Ender-5, Ender-5 Pro and CR-20, CR-20 Pro, pls confirm if this borosilicate glass bed compatible with your printer..
Check Stock

Creality Fireproof and Dustproof 3D Printer Warm Enclosure Mini 3D Printer Tent for Ender 3/Ender 3 pro/Ender 3 V2/Ender 5 Pro Constant Temperature Protective Cover Room

  • Constant Temperature: Creality 3D Printer Tent Keep a constant temperature printing environment, reducing the bad impact on printed models when....
  • Inner Size: 17.5*22.2*26.9 inch. Compatible with Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3S/Ender 5 Pro.A good mate for your 3D printing..
  • Safe to Use: The interior uses pure aluminum film and flame retardant appearance material. Technically, if in a fire, it will melt and not fire itself....
  • Quick and Easy Installation: Folding storage, easy to carry. Multi-faceted observation, reserved tool pockets. Economical 3D printing room. There are....
  • Extensive functionality: Dustproof and good noise reduction. Our 3D printer tent can reduce noise to a certain extent when printing, It can be used as....
Check Stock

Creality Ender 3 S1 3D Printer with Direct Drive Extruder CR Touch Auto Leveling High Precision Double Z-axis Screw Silent Board Printing Size 8.6X8.6X10.6in, Upgrade Ender 3 V2 for Beginners

  • OPEN SOURCE COMMITMENT - Experience the full power of open-source with the Ender-3 S1! Benefit from advanced features including G-code file preview, blazing-fast printing speeds of up to 160mm/s with resonance compensation, effortless temperature control with automatic PID settings, customizable bed leveling using editable mesh data, and the added versatility of an FDM/laser module option upon boot-up. Plus, enjoy the convenience of navigating in your preferred language with support for 9 UI languages. Don't wait, seize the opportunity and get your hands on the Ender-3 S1 now!.
  • DUAL-GEAR DIRECT DRIVE EXTRUDER - Compatible with more filaments, Ender 3 S1 3d printer can print PLA, TPU, PETG, ABS.etc. It is more lighter and features less inertia and more precise positioning. Upgraded dual-gear direct extruder features two chrome steel gears that are engaged at a 1:3.5 gear ratio. With a pushing force of up to 80N, the extruder realizes smooth feeding and discharging of flaments without slipping and works extremely well in printing flexible flaments such as TPU..
  • REMOVABLE SPRING STEEL PRINT SHEET - Different from ender3, ender 3 pro and ender 3 v2, this new-releas....
Check Stock

YOUSU Carbon Fiber PLA Filament 1.75 mm for 3D Printer & 3D Pen 1 kg (2.2 lbs) Black

  • [Premium PLA Filament] Carbon fiber filament Compared with PLA, stronger toughness, higher strength and rigidity, brittle feel, low shrinkage, high fluidity, suitable for printing industrial products.
  • [Problem Free & Easy to Print ] Yousu Carbon fiber PLA filament has better dimensional stability for warp free printing, excellent layer adhesion,clog-free, bubble-free and easy-to-use, and easy support removal..
  • [ Cost-effective and Wide Compatibility ]Our Yousu Filament is Compatiable for Most FDM 3D Printers in the market,Such as Creality Ender,Ender 3,Anycubic,Flashforge, Makerbot,Aquila,Etc..
  • [Vacuumed Sealed Package] The Filament Net Weight: 1KG. Yousu PLA filament comes in a sealed vacuum bag with a desiccant bag, keep your 3d printer filament in a good condition to be printed. NOTE:Please pass the filament through the fixed hole to avoid tangles after use..
  • [Recommended printing conditions]: 195°C-220°C (depending on the printer model), Printing speed: 50-100mm/s. Hot bed temperature: 50 – 60°C.
Check Stock

LANMU Micro SD to SD Card Male to Female Extension Cable Adapter, Flexible Extender Compatible with Ender 3 Pro/Ender 3/Ender 3 V2/Ender 5/Monoprice Mini/Anet A8 3D Printer/Raspberry Pi (5.9in/15cm)

  • Premium Materials: Micro SD to SD Card Extension Cable is made of High-quality Plastic & FFC.5.9in length design make it flexible and long enough to extend and read your SD cards..
  • Type: Micro SD to SD Card male to female Extension Adapter..
  • Support the card 32G, easily make your navigation upgraded, much more convenient for your life..
  • Universal Compatibility: Widely compatible with GPS, DVD, DVR, LED/LCD screen, mobile phones, Raspberry Pi and reality 3D printers, such as CR-10,Ender 3 Pro,Ender 3,Ender 3 V2,Ender 5,Anet A8,Anet A6, MonoPrice and more.(Note:If the micro sd end is locked, it will make a "click" sound to remind you. Please check it before printing.If you wanna change the card, please firstly unplug the micro sd card, change the new card,then plug the micro sd card to the printer slot again.).
  • Fast Reading Speed: LANMU SD Card Extension never affect the read and write speed of your machine, keeping it efficient and safe..
Check Stock

Official Creality Ender 3 V2 Upgraded 3D Printer with Silent Motherboard Meanwell Power Supply Glass Bed 220x220x250mm

  • Silent Motherboard: Creality ender 3 v2 with TMC2208 stepper driver and 32-bit V4.2.2 silent motherboard.
  • More stable movement performance can ensure....
  • Carborundum Glass Platform: Enable the hot bed heat up quicker and prints adhere better without the warping. Ultra smoothness even on the first layer..
  • MeanWell Power Supply: Ender 3 V2 is equipped with a MeanWell power supply, which can meet the needs of fast heating and long-term printing..
  • Resume Printing Function: Ender 3 v2 has resume printing function that can from the last recorded extruder position after suffering unexpected power....
  • Ideal for Beginners: Creality ender 3 v2 provides simpler operation.
  • the upgrade of this printer reduces the burden on beginners, everyone can enjoy....
Check Stock

Creality Ender PLA 3D Printer Filament (Yellow)- Polymer Smooth Printing 1.75mm 1kg Spool (2.2lbs)Dimensional Accuracy± 0.03 mm

  • ...ilable from renowned suppliers. Dedicated people, highest standards. Production on our state-of-the-art computer-controlled machinery guarantees a truly consistent filament, also between colors and batches. It will perform as expected, every time..
  • HIGH SUCCESS RATE: Neat Winding Technology of our Filaments makes 3D printing smooth and stable, avoiding tangles and jamming, ensuring the quality for long-time printing.
  • Professional production reduces bubbles and create no odor during the printin.
  • Good adhesion improves the success rate of 3D printing..
  • EXCELLENT RESULTS: The glossy feel of Ender PLA Filament often attracts those who print display models or items for household use. Many appreciate the plant- based origin of this material. When properly cooled, our filament has a high maximum printing speed and sharp printed corners. Combining this with low warping of the print makes Ender PLA popular for home printers, hobbyists, prototyping and schools..
  • PROTECT YOUR PRINTER: Ender PLA Filament is not easy to break, with precise consistent diameter and no clogging. With its premium quality it provides cares for your printer when working..
  • VACUUM PACKAGE: Sealed vacuum packing with desiccant keeps the filament dry and sound before getting to you. Keep the f....
Check Stock

Official Creality Ender 3 S1 3D Printer with Direct Drive Extruder CR Touch Auto Leveling High Precision Double Z-axis Screw Silent Board Printing Size 8.6X8.6X10.6in, Upgrade Ender 3 V2 for Beginners

  • ... lighter and features less inertia and more precise positioning. Upgraded dual-gear direct extruder features two chrome steel gears that are engaged at a 1:3.5 gear ratio. With a pushing force of up to 80N, the extruder realizes smooth feeding and discharging of flaments without slipping and works extremely well in printing flexible flaments such as TPU..
  • CR Touch Auto Bed Leveling: Upgraded CR Touch 16-point automatic bed leveling technology saves you the trouble of manual leveling. Easy to use, the intelligent leveling system can automatically compensate for the printing height of different points of the heatbed..
  • Removable Spring Steel Print Sheet: Different from ender3, ender 3 pro and ender 3 v2, this new-released FDM 3d printer comes with a removable PC spring steel platform. The innovative printing platform is a combination of a PC coating, a spring steel sheet and a magnetic sticker, which sticks to the surface immediately when released. The PC coating brings good adhesion and printed models can easily be removed by bending the print sheet..
  • Higher Printing Precision & Easy to Install: With a Z-axis dual-screw+Z....
Check Stock

WINSINN 40mm Fan 24V, Ender 3 Fan Upgrade 24 Volt Fans 4010 Hydraulic Bearing, Works with Ender 3 Pro 3X CR-10S (Pack of 5Pcs)

  • ✔️WINSINN 40mm fan 24v which perfect for ender 3 fan upgrade. Fit for Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus (Installation Position for Motherboard) and Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus, Ender-6, CR-10 V2., CR-10 v3., CR-X, CR-X Pro, CR-10 Max, CR-10S Pro V2, CR-2020, CR-3040Pro (Installation Position for Nozzle).
  • ✔️High quality Hydraulic Bearings, 2-years Warranty. Balance price and performance, suitable for daily use, life: 35,000 Hours..
  • ✔️Rated Voltage: DC 24V, Current: 0.08A, Power: 1.92W, Speed: 5700PRM, Air Pressure: 3.06mmH₂O, Airflow: 6.4CFM, Noise: 25.3dBA.
  • ✔️Connector & Cable length: XH2.54 – 11.8in(300mm), Size: 40mm x 40mm x 10mm.
  • ✔️Widely Used: Suitable for ventilation of Small PC Case / Router / Raspberry pie / TV box / VR glasses and any small electronic equipment cooling ventilation..
Check Stock