Best 3 speed

Receiver or Amplifier Megabase 12 Volt Trigger-Controlled Cooling Fans (12v), with multispeed Control, for Home Theater

...hich covers 145 square inches, and air is drawn out over the entire area of this raised base..
The system includes a 12 volt trigger control module, which turns the fan on and off, under the control of your component’s 12v trigger socket. The 12v module controls the power from the cooling system’s multi-speed transformer, directing it to the fans when it detects a 12v signal. In addition, you control the speed of the fans, with the multi-speed power controller..
IMPORTANT: Some receivers have a non-standard setup, where the receiver doesn’t directly control the trigger (for example, the trigger might be under the control of Zones 2 or 3, etc.). Please consult your receiver’s manual for details about how its 12v trigger operates, or contact me if you have questions..
Recommended fan speeds for this system: The fans (running together) are rated at 13db while moving 50 cubic feet of air per minute at 1/3 speed, or 16db & 72CFM at 1/2 speed. With component cooling, slow (and quiet) are the way to go! Other available speeds: 2/3 speed = 19db/98CFM, 3/4 speed = 22db/110CFM, full speed = 25db/148CFM..
The Megabase cooling unit measures 14.5″ wide, and 10″ deep. It is 1-1/2″ tall, and only requires about 1/....

Check Stock

Toshiba SDHC memory card (FlashAir) 8 GB SD-WC008G

Shot speeds up to 90MB/s, transfer speeds up to 170MB/s [requires a compatible device capable of reaching such speeds, such as the SanDisk SD UHS I card reader (sold separately)] | Based on internal testing.
Performance may be lower depending upon host device, interface, usage conditions and other factors 1MB=1,000,000 bytes.
Perfect for shooting 4K UHD video (1) and sequential burst mode photography, (1)Full HD (1920x1080) and 4K UHD (3840 x 2160) video support may vary based upon host device, file attributes and other factors. Compatibility - Compatible with microSDHC and microSDXC supporting host devices.
Capture uninterrupted video with UHS Speed Class 3 (U3) and video Speed Class 30 (V30)(2) | (2)UHS Speed Class 3 designates a performance option designed to support 4K UHD video recording with enabled UHS host devices.
UHS video speed class 30 (V30), sustained video capture rate of 30MB/s, designates a performance option designed to support real time video recording with UHS enabled host devices.
Built for and tested in harsh conditions (3): Temperature Proof, Water Proof, shock Proof, and X ray Proof, (3)Card only.

Check Stock

JJ Boom 48v/60V 800w 10\ Mini Harley Motor Wheel Vacuum Tyres 10-6-5.5 Wide Tyre Scooter Motor EVO Engine Motor ATV Hub Motor(48v800w)

【HIGH-SPEED POWERFUL MID MOTOR】- High Speed Brushless DC Motor Kits 2000W 60V, Rated Speed No-load 4250rpm, Max can be 5300rpm, Motor Rated current 35A, The scooter motor is Smaller and Lighter Compared body Make More Power efficient, High Quality Aluminum Shell to be Sturdy and Reliable, Easy to Install for Go kart E-bike E-Scooter mini Motorcycle Quad atv and more..
【Electric Gokart Motor HIGH EFFICIENCY】- Small Size, With high Torque High speed, BLDC Mid Drive Motor, and the Scooter Motor with Mounting Bracket is more easy to Install and Enough Carry, with wind cold hole, Motor Wiring length about 150cm(59inch)，Motor Weight about 3.3kg (7.3lb)..
【DC MOTOR KITS POSITIVE & NEGATIVE ROTATION】- BLDC Go kart Motor Can Through the Motor Reversing Wire or Handlebar reverse Switch To Let The Motor Go Clockwise or Counterclockwise, And with 3 Speed Function, Low speed 50%, Mid speed 70-80%,High Speed 100% Efficiency, But Don’t let the Motor Run Reverse Long Time, is Not safe for Motor Life..
【24Mosfet 45A Brushless Motor Controller】- The Motor Kit include 24MOS 45A±1A Speed Controller, BLDC Motor Controller with high Quality Material, is enough for the Motor, with Hall 3-Speed Reverse Throttle Charging e-Braking Power lock Light Functions....

Check Stock

Ryobi 18-Volt ONE+ Cordless 3/8 in. 3-Speed Impact Wrench (Tool Only) P263 (Renewed)

3,8 in. square anvil with hog ring to change sockets easily.
Impact mechanism produces 150 ft./lbs. of torque and up to 3,400 impacts per minute (IPM) for a variety of heavy-duty applications.
3-Speed Selector Switch offers greater control over a wide range of fastening applications.
Speed 1 -For precision fastening (0 1,700, min), Speed 2 -For controlling driving depth and fastener tension (0 2,500, min), Speed 3 -For maximum torque (0 3,200, min).

Check Stock

USB HUB for Nintendo Switch USB 3.0 Hub Compatible with Nintendo Switch PC Laptop PS5 PS4 PS3 Xbox One with 4 USB Ports

USB 3.0 Fast Input - USB 3.0 Hub is the universal extender for extended multi-port USB 3.0 date transmission.
it is compatible with Nintendo Switch,....
4 USB 3.0 data-transmission interfaces - Plugging the USB3.0 connecting line to the USB3.0 data interface of the console, 4 USB 3.0 data-transmission....
HIGH-SPEED USB 3.0 DATA TRANSMISSION - Use high-speed USB 3.0 data transmission hub processor chip. USB3.0 transmission speed is 10 times that of....
Electrical Property - The reading speed of 4 USB interfaces of this product is 3.0 transmission speed and compatible with USB2.0 data transmission. If....
Auxiliary Power - It has the usb type c port on the side. You can plug the USB type c cable into the switch usb hub. The maximum input current of this....

Check Stock

VIVOSUN Variable Speed Controller Cordless Vent Blower Speed Adjuster for Inline Duct Exhaust Fan

You can have high, medium, and low speed of the fan, suitable for different needs and situations with better ventilation.
Lower Cost: With this fan speed controller, you don’t need to run the fan at full speed all the time so that there is no waste of energy.
Safe Operation: Simple box design to stay out of the way and keep cords tangle-free.
Automatically protects against fan motor burnout.
Usage Scenario: This speed adjuster can be used on fans in places like grow tents, warm houses, home, basement, office and so on.

Check Stock

TOPGREENER Kalide Fan Speed Control Switch 3-Speed Fan Wall Switch Single Pole 120VAC 60Hz 2.5A Neutral Wire Not Required TGFS3-W White

Ditch the pull-chains and adjust fan speed from a convenient location with the Kalide fan speed wall switch.
Features an easy-to-use slider to adjust between 3 fan speeds.
to turn off, simply move the vertical slider all the way down until it noticeably....
Made of Polycarbonate Thermoplastic material to provide the durability and resilience needed to withstand hard impacts and heavy force.
Compatible with mechanical 3-speed fans up to 2.5A.
designed for 3-speed mechanical fans with pull string control.

Check Stock

Lock Up

Compatible with Xfinity from Comcast, Spectrum, Cox, CableONE & more.
Three-in-one DOCSIS 3.0 Cable Modem + AC1600 WiFi Router+ 2 Gigabit Wired Switch.
Up to 680Mbps modem speed and Dual-Band AC1600 (2.4GHz & 5GHz) WiFi speed. 16×4 channel bonding/ Approved for plans up to 300 Mbps.
DOCSIS 3.0 unleashes 16x faster download speeds than DOCSIS 2.0.
NETGEASR Genie App +Content filtering Parental Controls allow you to easily manage your network from your Mobile device.Microsoft Internet Explorer 5.0, Firefox 2.0, Safari 1.4, or Google Chrome 11.0 browsers or higher.
Ideal for streaming HD content, fastest downloads, and high-speed online gaming. System Requirements:Microsoft Windows 7, 8, 10, Vista, XP, 2000, Mac OS, UNIX, or Linux. Use laptop with 3×3 450 Mbps adapter like centrino 6300/5300 for maximum performance.

Check Stock

Kunray 48V Go Kart Motor Kit 1000W Electric Brushless DC Motor Kits 3500RPM with 30A BLDC Mid Motor Speed Controller Handlebar Twist Grip Throttle (48V1000W Kits with Mounting Bracket)

【HIGH SPEED POWERFUL MID MOTOR】- Brushless DC Motor 48V 1000W, Rated Speed No-load 3500rpm, Max 4200rmb, Motor Rated current 20.8A, 4N.m, Smaller and Lighter Compared body Make More Power efficient, High Quality Aluminum Shell to be Sturdy and Reliable, Easy to Install for Go karts E-bike Scooter mini Motorcycle Quad atv and more..
【SMALL BODY WITH HIGH EFFICIENCY】- Small Size, With high Torque High speed, BLDC Mid Drive Motor with T8F 11Teeth Sprocket, and the Scooter Motor with Mounting Bracket is more easy to Install and Enough Carry, with wind cold hole, Motor Wiring length about 150cm(59inch)，Motor Weight about 3.7kg (8.16lb)..
【Brushless Speed Controller】- 12Mosfet 30A BLDC Motor Control, The Motor Kit include BLDC Motor Controller with high Quality Material, is enough for the Motor, with Hall 3-Speed Reverse Throttle Charging e-Braking Power lock Light Functions etc..
【DC MOTOR KITS POSITIVE & NEGATIVE ROTATION】- BLDC Go kart Motor Can Through the Motor Reversing Wire or Handlebar reverse Switch To Let The Motor Go Clockwise or Counterclockwise, And with 3 Speed Function, Low speed 50%, Mid spee....

Check Stock