Best Poe Voltage

DSLRKIT Gigabit 48V 30watt PoE Injector Adapter Power Over Ethernet 802.3at af 1000Mbps

  • Support international standard IEEE802.3 af & IEEE802.3at(30W).
  • POE port Support 10/100/1000Mbps data transmission. Transfer Rate: 10/100/1000Mbps, Standard: IEEE 802.3 I, IEEE 802.3 u, IEEE 802.3 x, IEEE 802.3 af/at..
  • PD support 44V-57V voltage transmission, Automatically detects power supply from PSE power supply module.
  • Support the isolation circuit protection, can effectively protect electrical equipment.
  • Support the short circuit, overvoltage protection.
  • 12V 2A power output, easy to access Poe network for non-PoE terminal.
Check Stock

YIDUOYUNCAI 6 Port PoE Switch (4*100Mbps PoE Port+2*100Mbps Uplink Port),78W,802.3af/at,VLAN,Metal Fanless,Unmanaged Plug and Play

  • 【Fanless design】The fanless design makes poe switch work without any noise..
  • 【Network cable short-circuit protection mechanism】POE switch is stable and has strong anti-interference ability, protect the fault caused by the short circuit of the network port.Short Circuit, Over Current and Over Voltage Protection..
Check Stock

Mikrotik RB3011UIAS-RM RouterBOARD 10xGigabit Ethernet, USB 3.0, LCD, RB3011

  • The RB3011 is a new multi port device, our first to be running an ARM architecture CPU for higher performance than ever before.
  • The RB3011 has ten Gigabit ports divided in two switch groups, an SFP cage and for the first time a SuperSpeed full size USB 3.0 port, for adding storage or an external 3G/4G modem.
  • RB3011UiAS-RM Unit comes with 1U rackmount enclosure, a touchscreen LCD panel, a serial console port and PoE output functionality on the last Ethernet port.
  • Dimensions: 443 x 92 x 44 mm, Size of RAM: 1 GB, Storage size: 128 MB, PoE in: Passive PoE, PoE-out ports: Ether10, PoE out: Passive PoE.
  • 10/100/1000 Ethernet ports: 10, SFP ports: 1, Number of USB ports: 1, USB slot type: USB 3.0 type A, PCB temperature and Voltage monitor.
Check Stock

YIDUOYUNCAI 11Port PoE Switch,8 Port 100Mbps PoE+2*1000Mbps Uplink Port and1Gigabit SFP Slot,150W,802.3af/at,Metal Fanless,Unmanaged Plug and Play

  • 【Plug and Play】Easy setup with no software installation or configuration needed.
  • 【Network cable short-circuit protection mechanism】POE switch is stable and has strong anti-interference ability, protect the fault caused by the short circuit of the network port.Short Circuit, Over Current and Over Voltage Protection..
  • 【Fanless design】The fanless design makes poe switch work without any noise..
Check Stock

Network Cable Tester, AT278 TDR Multi-Functional LCD Wire Tracker for RJ45, RJ11, BNC, Metal Cable,PING/POE NF-8601S for Length Testing

  • 【Main Function-Fault Distance】Measures cable length and display the distance to fault, graphical wire mapping, opens, shorts..
  • 【PoE & PING】PoE: Identify PoE presence and detect how much voltage. PING: To test network performance, data packet, min & max time..
  • 【AC Filter】Tone trace cable with complete AC Interference Rejection, available on common switch & PoE Switch, much stronger than other tracers on markets..
  • 【Hub Blink】To locate network port by the flashing port light on a server/switch/hub/router port..
  • 【AT278 Cable Tester Benefits】TF card included to export data to PC.
  • Voltage detector: included in receiver (90-1000V).
  • Rechargeable Lithium battery for more efficient work. Low voltge alarm function and automatic delay power on-off. Big LCD color screen 320*240 and lighting lamp in darkness..
Check Stock

NOYAFA Advanced Network Cable Tester With PoE& NCV & Lamp For CAT5e/CAT6/CAT6a, Multifunction Wire Tracker Cable Tester For Tracker Underground Telephone Line Finder Home Repair

  • Main Function : Detecting PoE voltage, current, power, PSE standards Power supply modes, Verify RJ45 cables.
  • 1. Three scan modes selectable: AC filter mode/ Analog mode/ PoE mode.
  • 2. Detect AC voltage presence (50V-1000V). Test physical status for STP, UTP lan cable..
  • 3. Measure cable length accurately , the range is 120m..
  • 4. Hub blink for locating network port by the flashing port light on Hub / Switch. Available to 10M/100M/1000M Hub/ switch..
  • 5. PoE testing : identify which pins are providing power and detect how much voltage, identify which the type of PSE (at/af standard).
Check Stock

Network Cable Tester, Poe Cable Tester for CAT5e/CAT6/CAT6a, Ethernet Network Tester with NCV, NF-8209 Network Cable Tracker, Test Fault Distance Location and Length Measurement by TDR

  • ▶【Three scan modes】AC filter mode/ Analog mode/ PoE mode.
  • ▶【PoE testing】Test the information of standard PoE device, such as POE voltage, power supply polarity, power supply mode and also the type of PSE(af or at standard)..
  • ▶【Hub blink】Locate network port by the flashing port light on Hub / Switch. Available to 10M/100M/1000M Hub/ switch..
  • ▶【Length measurement】Cable length testing accuracy can be up to 98% and 200 m..
  • ▶【Cable continuity testing & NCV】Test physical status for STP, UTP lan cable. Detect AC voltage presence (50V-1000V)..
Check Stock

Mikrotik CRS326-24G-2S+RM Network Switch L2 Gigabit Ethernet (10/100/1000) Grey Power Over Ethernet (PoE)

  • The total non-blocking throughput is 168 Gbps, switching capacity is 336 Gbps and the forwarding rate reaches 235 Mpps..
  • All 48 Ethernet ports offer different power output options: Passive PoE, low voltage PoE, 802.3af/at (Type 1 “PoE” / Type 2 “PoE+”) with auto-sensing.
Check Stock

Riiai 2in1 Network Cable Tester & Digital Multimeter, Multifunction Ethernet Wire Tracer with PoE & NCV & Lamp for CAT5 CAT6, Telephone Line Probe Toner Locator Finder Voltage Continuity Test Tool

  • -【Multi-Function Wire Detector】: 3 digital scan modes, both analog and PoE modes for easy cable tracking. Equipped with the most powerful cable location technologies for all work environments. Also included cable length measuring, continuity testing, voltage testing, cable faults testing, PoE testing, hub blink and NCV function, making it a must-have tool for cable engineers..
  • -【Audio Toner for Cable Collation】: Fast and efficient positioning. Real-time measurement of network cable length（up to 500M/1640ft), and built in short circuit protection. Quickly and easily identify the desired cable in large bundles. This unit is widely used in telephone systems, computer networks, BNC cables and other network cables. Perfect for security monitoring, communication wires, integrated wiring and other weak current systems..
  • -【PoE Testing & Port Flashing】: The POE testing feature can check cable mapping polarity, voltage of POE network switches, withstand 60VDC, and locate network ports by the flashing the network light (blinks every 2 second) on hubs and switches. Automatically detects and switches between 10M/100M/1000M modes..
Check Stock