Best Poe Switches

Psiber Data LM26 LanMaster 26 Link Tester

  • Scans all pins and displays PoE power including volts, watts, cable pair location, and end/midspan.
  • Locate active network devices and display capabilities (includes VoIP phones, IP cameras, access points, switches, NIC cards).
  • Displays the advertised data switch speed (10/100/1000) and duplex.
  • Power Pass Thru and two RJ45 jacks allows the Power Panel to be connected inline, allowing PoE power to be passed to the PoE device so it can be tested.
  • Placed inline between two devices, the power draw of the device can be measured in watts helping to prevent too much power draw - the number one reason for IP/PoE network failure.
Check Stock

New Upgraded Network Cable Tester with Optical Power Meter VFL, RJ45 Wire Cable Tracer for Telephone, Ethernet, Video, Tone Generator,CAT5 CAT6 Cable Toner Ethernet Cable Tester PoE

  • ...e nine features to meet your needs. Continuity testing, cable scan, port flash, length measurement, POE Power Supply Test, QC testing, optical power meter, VFL function, and NVC function..
  • PoE Testing: PoE testing can check cable mapping polarity and voltage of PoE network switches, withstand 60VDC. Automatically detects and switches between 10M/100M/1000M modes. Includes cable tracking, short circuit test, interruption of circuit test and etc.
  • Cable Length Test: The RJ45 cable tester can quickly measure the length of the cable with a range of 200m. Not only network cables, but also phone lines and BNC cables..
Check Stock

TRENDnet 16-Port Gigabit PoE+ Switch, 16 x Gigabit PoE+ Ports, 246W PoE Power Budget, 32 Gbps Switching Capacity, Desktop Switch, Ethernet Network Switch, Metal, Lifetime Protection, Black, TPE-TG160g

  • ETHERNET PORT INTERFACE: 16 x Gigabit PoE+ ports..
  • POE POWER BUDGET & SWITCH CAPACITY: The large 246 W PoE power budget supports up to 30 Watts of PoE power per port and all Gigabit ports produce a 32 Gbps switching capacity and supports Jumbo Frames up to 10 K.
  • POE CAMERA FLEXIBILITY: The 16-Port Gigabit PoE+ Network Switch recognizes non-PoE, PoE (15. 4 W), and PoE+ (30 W) cameras (or other PoE devices) and supplies the required amount of power automatically.
  • RACK MOUNTABLE: This network switch is equipped with a rack mountable rugged metal enclosure with an included rack mount kit and rack mount brackets included for installation..
  • OPERATING TEMPERATURE: This 16 port gigabit PoE+ Ethernet switch is rated with an operating temperature range of 0 – 45 °C (32 - 113 °F)..
  • TRENDnet LIFETIME PROTECTION: All metal TRENDnet switches are backed by our lifetime TRENDnet Manufacturer Protection..
Check Stock

YIDUOYUNCAI 6 Port PoE Switch (4*100Mbps PoE Port+2*100Mbps Uplink Port),78W,802.3af/at,VLAN,Metal Fanless,Unmanaged Plug and Play

  • ...+ Switch】4*10/100Mbps PoE+ Ports(802.3at/af)&2*10/100Mbps uplink, power budget up to 30W per PoE port and 78W for the whole..
  • 【Extend Mode】When Extend Mode is enabled, the transmission distance of POE ports can be extended to 250m at transaction rate of 10M..
  • 【Active poe switch with 802.3af/at compliant】Poe switches support poe devices and non-poe devices, But when connecting passive poe device or non-poe device,the switch can only transmit data and cannot power your device,so the connected device needs to be separately powered. Or you can use it with active poe splitter..
  • 【AI PD Detection】The poe port will intelligently judge whether the device connected to the port needs power supply. If it is a non-poe device that does not need power supply, the switch will not supply power to these devices and will not damage the device..
  • 【Plug and Play】6 Port Unmanaged Network Switch Support automatically detect devices,easy to setup with no software installation or configuration required..
  • 【Fanless design】The fanless design makes poe switch work without any noise..
  • 【Network cable short-circuit protection mechanism】POE switch is stable and has strong anti-interference ability, protect the fault caused by the short circuit of the network port.....
Check Stock

LINOVISION Mini 2 Port POE Extender IEEE 802.3af/at POE Repeater Up to 1000ft Power Over Ethernet Over Cat5/6 Cable, POE Splitter to 2 POE Devices Like IP Cameras, IP Phone, Wireless AP

  • ...t supports two levels cascade deployment, therefore total 1,000ft POE + Data transmission is provided. (The 2nd POE Extender’s POE Input should be connected to the 1st POE Extender’s Out port, not Camera port).
  • 【COMPLIANT TO IEEE802.3AF/AT STANDARD】This POE Extender works with all standard IEEE802.3af/at POE Switches/POE injectors/POE NVRs. And the POE Outputs supply power to standard POE devices (don't support 24V POE Devices) , like POE IP camera/IP phone/IP speaker. Noted: The CAMERA Port supports max 8W power consumption and the OUT Port supports max 15W. The max bandwidth is 100Mbps. As the distance increases, the power and the bandwidth will decrease..
  • 【EASY TO CONFIGURE IP CAMERA ON SITE】By interting this PoE-Extender02 to an existing PoE cable, installers can use laptop or CCTV Tester to easily adjust camera angle and configure IP.
  • 【PLUG-N-PLAY INSTALLATION】Plug-n-Play, no configuration or setup is required. With compact dimension ( 3.1”* 2” * 1”), enough to fit many junction boxes or outdoor waterproof enclosures..
Check Stock

TP-Link EAP245 V3 | Omada AC1750 Gigabit Wireless Access Point | Business WiFi Solution w/ Mesh Support, Seamless Roaming & MU-MIMO | PoE Powered | SDN Integrated | Cloud Access & Omada App | White

  • Superior Speeds with MU-MIMO — Designed with the latest 802.11ac Wave 2 MU-MIMO technology, the EAP245 reliably delivers dual-band Wi-Fi speeds up to 1750 Mbps to multiple devices simultaneously..
  • Integrated into SDN — Omada Software Defined Networking integrates APs, switches & gateways w/ several control options offered - Hardware Controller, Software Controller & Cloud-Based Controller (Contact TP-Link for CBC Details). Standalone mode applies..
  • Cloud Access — Remote Cloud access and Omada app brings centralized cloud management of the whole network from different sites—all controlled from a single interface anywhere, anytime..
  • SDN Compatibility — Make sure your devices/controllers are equipped with SDN firmware. (Or upgradable). SDN controllers work only with SDN Access Points, Switches & Gateways. Non-SDN controllers work only with non-SDN APs. Details found on TP-Link website..
  • Advanced Wireless Tech — Supports Mesh WiFi, Seamless Roaming, Band Steering, Airtime Fairness and Beamforming technologies..
  • Multiple PoE Options for Easy Installation — EAP245 supports both 802.3af/at PoE and Passive PoE power supply, can be either powered by a PoE switch or the provided PoE adapter, making deployment effortless and flexible..
Check Stock

YIDUOYUNCAI 11Port PoE Switch,8 Port 100Mbps PoE+2*1000Mbps Uplink Port and1Gigabit SFP Slot,150W,802.3af/at,Metal Fanless,Unmanaged Plug and Play

  • ...ith 8 100M port PoE + 2 1000M Uplink port+ 1 SFP port, 8×PoE ports providing up to 30W per port, total PoE budget 150W, 2 gigabit ethernet Uplink Port for connecting NVR and Internet , etc..the SFP slot can choose the optcial model with 2km,10km,20km,40km...etc..
  • 【Active poe switch with 802.3af/at compliant】poe switches support poe devices and non-poe devices, but when connecting passive poe device or non-poe device, the switch can only transmit data and cannot power your device, so the connected device needs to be separately powered. Or you can use it with active poe splitter..
  • 【AI PD Detection】The poe port will intelligently judge whether the device connected to the port needs power supply. If it is a non-poe device that does not need power supply, the switch will not supply power to these devices and will not damage the device..
  • 【Built-in power supply】The power supply is located in the poe switch body and integrated with the switch. It is simple and light. After connecting to our AC Power Cable, the switch can transmit power to the equipment connected to the switch..
  • 【Plug and Play】Easy setup with no software installation or configuration needed.
  • 【Network cable short-circuit protection mechanism】POE switch is stable and has strong ....
Check Stock

LoveRPi Compact PoE HAT with PWM Fan Controller for Raspberry Pi 4

  • ...ized footprint. Must be used with a standards compliant IEEE 802.3af PoE or 802.3at PoE+ switch that complies with Section 33.4.1 for power sourcing equipment (PSE) electrical isolation. "Passive PoE" (DC 24V or 48V) is not standards compliant and may cause damage to equipment if connected improperly. Some Ubiquiti switches are not properly isolated and require isolated PoE HATs..
  • GROUND LOOPS WARNING: Do not use this device with grounded USB peripherals, HDMI displays, and attachments. Please use the professional PoE model with isolation transformer to prevent electrical loops. In non-controlled PoE applications, ALWAYS use the professional PoE model..
  • INTEGRATED PWM FAN CONTROLLER: Based on the EMC2301 SMBus compliant fan controller, this PoE HAT is fully programmable over I2C to control standard 4-pin PWM fans. Set user-space or device-tree based temperature or event triggers for complete fan control from off to maximum RPM. Fan speed tach also provides stall detection, spin-up control, and ramp rate control with 1% accuracy from 500-16K RPM..
  • VENTILATED CASE WITH FAN HIGHLY RECOMMENDED: Do not use this product in an enclosed case without active air circulation. Airflow around the HAT and Raspberry Pi 4 Model B ensures performance and stable operatio....
Check Stock

TP-Link EAP265 HD | Omada Enterprise AC1750 Gigabit Wireless Access Point for High-Density Deployment | Support Mesh, Seamless Roaming & MU-MIMO | PoE Powered | SDN Integrated, Cloud Access &Omada App

  • High-Density Connectivity — MU-MIMO, Load Balance & professional antennas improve capacity in dense environments to connect more devices simultaneously..
  • Integrated into Omada SDN — Omada's Software Defined Networking (SDN) platform integrates network devices including access points, switches & gateways with multiple control options offered - Omada Hardware controller or Omada Software Controller. Standalone mode also applies..
  • Cloud Access — Remote Cloud access and Omada app brings centralized cloud management of the whole network from different sites—all controlled from a single interface anywhere, anytime..
  • SDN Compatibility — For SDN usage, make sure your devices/controllers are either equipped with or can be upgraded to SDN version. SDN controllers work only with SDN Access Points, Switches & Gateways. Non-SDN controllers work only with non-SDN APs. For devices that are compatible with SDN firmware, please visit 'From the manufacturer - Q&A' section or TP-Link website..
  • Advanced Wireless Tech — Support Mesh WiFi, Seamless Roaming, Band Steering, Airtime Fairness and Beamforming technologies..
  • Multiple PoE Options for Easy Installation — Support both 802.3af/at PoE and Passive PoE power supply, can be ei....
Check Stock