Best Poe Device

LINOVISION Industrial 8-Port Full Gigabit Solar POE Switch with DC12V/DC24V to DC48V Voltage Booster, IEEE802.3at with Total POE Budget 240W, POE Power Supply for Solar Power/RV Truck/VoIP Systems

DC12V ~ DC48V POE VOLTAGE BOOSTER - Supply standard IEEE802.3af/at POE power with DC12V/DC18V/DC24V/DC36V/DC48V input.
8-PORT FULL GIGABIT POE SWITCH - Providing 8*10/100/1000Base-T Ethernet PoE ports and 2*1000Base-X SFP slots (Fiber module is not included). Each POE ports are compliant to IEEE802.3af/at standard. It supports one-key fast ring fiber network and broadcast storms protection (BSP).
INDUSTRIAL DESIGN FOR HARSH ENVIRONMENT - Fanless design and wide working temperature (-40℃ ~ 75℃ or -40 ℉ ~167 ℉).
POE WATCHDOG - Realtime monitoring POE load device's status and will automatically reboot POE port when the connected device is not active. It proivdes non-stop running of POE device, like security cameras, IP speakers and IP phones.
TOTAL 240W POE BUDGET - Up to 30W per POE port, and total 240W POE budget (DC48V input), or 120W (DC24V input), or 80W (DC12V input).
NON-STOP POE SUPPLY WITH DUAL POWER INPUT - Support 2 channel DC12V-48V redundant power inputs and auto failover, ensure high reliability networking system.
APPLICATION - For solar power system, vehicle, RV, VoIP IP phone system, robust fiber ring network.

Check Stock

LINOVISION Mini 2 Port POE Extender IEEE 802.3af/at POE Repeater Up to 1000ft Power Over Ethernet Over Cat5/6 Cable, POE Splitter to 2 POE Devices Like IP Cameras, IP Phone, Wireless AP

【2-PORT POE SPLITTER】This 2-port POE extender is designed to supply POE power to two POE devices through one Cat5E/6 cable, and no power adapter is required. It is powered by 48V or 53V PoE Switch/POE NVR/PoE Injector/Mid-span. With this POE splitter, users can easily add extra POE device or non-POE device to existing cable without running a new network cable..
【UP TO 1,000FT POE + DATA EXTENTION】Extra 330ft POE+Data transmission will be extended with one Linovision POE Extender. And it supports two levels cascade deployment, therefore total 1,000ft POE + Data transmission is provided. (The 2nd POE Extender’s POE Input should be connected to the 1st POE Extender’s Out port, not Camera port).
【COMPLIANT TO IEEE802.3AF/AT STANDARD】This POE Extender works with all standard IEEE802.3af/at POE Switches/POE injectors/POE NVRs. And the POE Outputs supply power to standard POE devices (don't support 24V POE Devices) , like POE IP camera/IP phone/IP speaker. Noted: The CAMERA Port supports max 8W power consumption and the OUT Port supports max 15W. The max bandwidth is 100Mbps. As the distance increases, the power and the bandwidth will decrease..
【EASY TO CONFIGURE IP CAMERA ON SITE】By interting this PoE-Extender02 to an existing PoE cable, ....

Check Stock

Reidubo 6 Port Ethernet PoE Switch with 4-Port PoE, 2 Uplink Port, 100Mbps, 75W, Unmanaged, Plug and Play, Extend & VLAN(Compatible with TP-Link &Ubiquiti Access Point-AP WIFI6)

... wide range of connection options to meet your diverse Internet needs..
【Built-in Power Supply & 4KV Lightning protection】Reidubo 6-port PoE switch built in power supply (75W).power adapter no more needed,which makes the PoE Switch simpler and lighter. Ideal for PoE IP Camera, Access Point, IP Phone and other PD devices..4KV lightning protection design allows your products and equipment to operate stably even in bad weather. Supporting IEEE802.3af/at PoE Protocol, with per port output power of 15.4W/30W..
【Unmanaged Plug and Play &Multiple installation options】Reidubo PoE Switch support automatically detect devices, just plug in the power cord and network cable.Easy setup with no software installation or configuration needed.Supports desktop, wall or rack placement.It can be installed in office, home, and commercial locations, it is the good choice for high bandwidth requirements.
【Intelligent PD Detection& QoS function】The PoE switch will automatically identify whether the device connected to the port needs power supply. If it is a non-poe device that does not require power，the power of the port can be automatically turned off, which can protect the non-POE device from damage.When the poe switch is carrying full traffic, Quality of Servic....

Check Stock

ThePoEstore 60W Gigabit PoE Injector Up to 60W Ultra Power Supply 10/100/1000Mbps IEEE 802.3at/802.3af Compliant Plug & Play

1 CH Gigabit Ethernet port input and PoE+ Gigabit Ethernet port output offer full duplex 2Gbps Ethernet speeds..
Auto-sensing technology delivers up to 802.3at 60W to a PoE+ device with backwards compatibility for 802.3at(30w) and 802.3af PoE (15.4W) devices. Not....
Converts a non-PoE Gigabit port to a PoE+ Gigabit port and Network a PoE device located up to 100 meters (328 ft.) away..
Use PoE Injector with PD to expand your network to where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or....
LED power input indicators for and PoE output,Internal AC/DC converter no need for external power brick ,Easy plug-and-play installation..

Check Stock

Tripp Lite Gigabit PoE+ Midspan Active Injector - IEEE 802.3at / 802.3af, 30W, 1 Port, Power Over Ethernet (NPOE-30W-1G),black

ADDS POE DEVICES TO YOUR LAN WITHOUT A POE SWITCH: PoE+ injector uses existing Cat5e/6/6a cable to supply power to a PoE device connected to a non-PoE switch..
EXPAND YOUR WIRELESS NETWORK: The NPOE-30W-1G delivers both power and data to any IEEE 802.3at (PoE+) or IEEE 802.3af (PoE) device up to 100 meters (328 feet) away..
SAVES YOU TIME AND MONEY: This compact PoE plus injector delivers 10/100/1000 Mbps of data and up to 30 watts of power using existing Cat5e/6/6a cables. That means, in addition to not buying a new PoE network switch, you also don’t need to install new AC power lines and electrical outlets..
SIMPLE PLUG-AND-PLAY: Quick and easy plug-and-play installation with no configuration necessary. Compact, hand-sized plastic housing ready for mounting on any smooth surface..

Check Stock

TRENDnet Inline PoE Tester, TC-NTP1, Tests 4PPoE, PoE+, PoE & Passive PoE Technology, Wattage, Voltage, Amperage, Polarity, LED Display, Battery-Free, Troubleshoot PoE Issues, IEEE 802.3af/at/bt

PORTS: This Inline PoE tester is equipped with 1 x Gigabit port for PSE connection, and 1 x Gigabit port for PoE Device connection.
TESTING MODES: The TC-NTP1 supports three testing functions. T-mode allows you to test your PSE device to determine the PoE switch's or injector's supported PoE standards, as well as voltage output. N-mode is used for non-standard passive PoE devices. I-mode is used for PoE inline testing, which displays the voltage, amperage, and wattage of the connected PD.
USER FRIENDLY: The TC-NTP1 PoE cable tester provides battery-free operation, and is ready for use right out of the box.
COMPATABILITY: The PoE cable tester is compatible with IEEE 802.3af/at/bt PoE devices up to 100W, and non-standard passive PoE devices from 11V – 60V..
STEP BUTTON: The convenient step button on the PoE cable tester allows users to cycle through voltage, amperage, and wattage readouts. It also allows users to lock the display to a speciﬁc readout (e.g. wattage) for real-time monitoring..
TROUBLESHOOT IN REAL TIME: Troubleshoot PoE issues in real-time on-the-go and accurately test 4PPoE, PoE+, PoE, and passive PoE technologies with this compact and lightweight PoE testing tool..

Check Stock

Cudy FS1006P 6-Port 10/100M PoE Switch 60W, 4 PoE Ports, CCTV Mode (Transmit Distance to 250m at 10Mbps), PD Detection,Fan-Less, Steel Case, Desktop and Wall-Mount, 802.3at / 802.3af

6 Ethernet ports, 4 port PoE+ with 60W total power budget, 2 port uplink ideal for connecting NVR and Internet. Compact Design with Internal Power Supply.
Power over Ethernet with 802.3at and 802.3af compliant. Power-Over-Ethernet (PoE) and PoE+ options available for powering IP Security Cameras, VoIP phones, wireless access points, and other PoE-powered devices..
CCTV function support remote power and data feeding up to 250m long distance, which is easy to expand network via ethernet cable to somewhere without power supply but need fix device such as IP Cameras..
With PD detect function, this PoE switch support auto detect power device, will not burned non-standard PoE device or normal PoE switch. Pin assignment: alternative 1/2 (+), 3/6 (-)..
High Quality chipset inside: Use high quality POE chip to ensure stable operation of the product.Plug & play: Mode A alternative 1/2 (+), 3/6 (-) power supply, simple set up with no software or configuration needed..

Check Stock

LoveRPi Compact PoE HAT with PWM Fan Controller for Raspberry Pi 4

...plies with Section 33.4.1 for power sourcing equipment (PSE) electrical isolation. "Passive PoE" (DC 24V or 48V) is not standards compliant and may cause damage to equipment if connected improperly. Some Ubiquiti switches are not properly isolated and require isolated PoE HATs..
GROUND LOOPS WARNING: Do not use this device with grounded USB peripherals, HDMI displays, and attachments. Please use the professional PoE model with isolation transformer to prevent electrical loops. In non-controlled PoE applications, ALWAYS use the professional PoE model..
INTEGRATED PWM FAN CONTROLLER: Based on the EMC2301 SMBus compliant fan controller, this PoE HAT is fully programmable over I2C to control standard 4-pin PWM fans. Set user-space or device-tree based temperature or event triggers for complete fan control from off to maximum RPM. Fan speed tach also provides stall detection, spin-up control, and ramp rate control with 1% accuracy from 500-16K RPM..
VENTILATED CASE WITH FAN HIGHLY RECOMMENDED: Do not use this product in an enclosed case without active air circulation. Airflow around the HAT and Raspberry Pi 4 Model B ensures performance and stable operation..
EASY INSTALLATION AND BACKWARDS COMPATIBLE: Please remove all non-essential heatsinks including RAM/U....

Check Stock

Psiber Data LM26 LanMaster 26 Link Tester

Scans all pins and displays PoE power including volts, watts, cable pair location, and end/midspan.
Locate active network devices and display capabilities (includes VoIP phones, IP cameras, access points, switches, NIC cards).
Displays the advertised data switch speed (10/100/1000) and duplex.
Power Pass Thru and two RJ45 jacks allows the Power Panel to be connected inline, allowing PoE power to be passed to the PoE device so it can be tested.
Placed inline between two devices, the power draw of the device can be measured in watts helping to prevent too much power draw - the number one reason for IP/PoE network failure.

Check Stock