Best Optic For Ruger 122

Ade Advanced Optics Ruger Mark I II III Mark 1,2,3,4 Red-Dot Sight Mount Fit Vortex Venom Docter Burris Fastfire Optics

  • This mounting plate is designed to connect red dot sights to Ruger Mark I, II, III, IV, IV-Lite, 22/45 pistol. For Mark I and II, confirm it has....
  • Also fit Doctor, Vortex Venom/Razor/Viper, Burris Fastfire, Meopta, Eotech mrds, , Insight red dots..
  • Mounting hardware comes with screws and allen wrench. For Mark I and II, confirm it has drilled/tapped holes. Plate will not work without holes..
  • Mounting hardware comes with screws and allen wrench. Aircraft grade Aluminum in Matte black finish. Mounting hardware comes with screws and allen....
  • This optic plate is designed to attach to the two existing holes on the top of Ruger Mark Slide. No need to replace the rear sight and allowing user....
Check Stock

TACBRO Ruger 10/22 1022 10 22 Red Aluminum Scope Base Mount Adapter Dual Weaver/Picatinny & Dovetail

  • Ruger 10/22 Weaver Style & 3/8” Dovetail rail.
  • Mounts onto the top of the 10/22 receiver utilizing the pre-drilled holes on the receiver.
  • Provides two types of rails (Weaver & 3/8" Dovertail) for mounting a scope or Reflex Optic.
  • T6 6061 Aluminum . Includes 4 Set Screws and Allen Wrench (no modifications necessary).
  • One Free Aluminum Opener (Randomly Selected Color, One Opener per Order).
Check Stock

Full Auto Ruger 10/22

  • Comes with an optic adapter/mounting plate to connect red dot sight to Ruger 10/22 and also a standard picatinny mount..
  • The red dot is designed to fit the slide/footprint on the cut made for Vortex Venom, Burris Fastfire, Meopta, Docter, Insight..
  • Fully windage and elevation adjustable and lockable.
  • Unlimited Eye Relief. 5 MOA. 5 Illumination Settings. Powered by a lithium CR2032 battery(Included).
  • Waterproof/Shockproof/Fog Resistant. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture..
  • This red dot comes with a picatinny mounting base. It is also compatible with varies handgun mounting plates that replace rear sight dovetail. It is also compatible to Optics Ready pistols such as Glock MOS, Springfield OSP,.
Check Stock

Kingslayer [Explicit]

  • Fit:Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365XL/P365X, Ruger Max-9, Glock 43X MOS/48 MOS(not compatible with regular glock 43x/48 that are not MOS), Springfield Hellcat OSP, S&W Shield 2.0 Optics Ready, S&W MP9 EZ, S&W M&P shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistol/mounting plate/slide with RMS/RMSC screw pattern/footprint..
  • EASE OF USE: Cyelee CAT red dot sight is always powered on with shake awake function.After four minutes without motion, illumination shuts off. Even the smallest tap or tilt will wake it up to the previous brightness setting..
  • RUNTIME: Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 200 microampere powers to give a very long battery life.It is perfect for daily carry..
  • RELIABLE:Reliable Design，a concealed carry optic must be ultra- dependable, because you are literally betting your life that it will be ready when called upon. CAT is waterproof and shockproof. The integrated co-witness notch provides an added sense of security in critical situations and allows for multiple aiming options..
  • DURABLE: Constructed from aerospace grade aluminum with recessed optic lens for added protection ....
Check Stock

Magpul X-22 Backpacker Stock for Ruger 10/22 Takedown, Flat Dark Earth

  • Takes the function of our full-size hunter X-22 takedown, and pares it down for ease of storage and transportation.
  • drop-in design compatible with all factory Ruger 10/22 takedown.
  • Offers a minimalist solution for the hunter or outdoorsman who wants to Transport their rifle in an efficient, convenient package without compromising Shooting Performance.
  • Unique locking interface to attach the barrel assembly to the stock body when being transported.
  • Reinforced polymer construction for strength and durability.
  • Comes with interchangeable standard and "optic height" Cheek risers.
  • hinged storage compartment in the stock capable of storing up to 3 spare 10Rd magazines.
Check Stock

Cyelee CAT Shake Awake Micro Green Dot Sight, 3.5 MOA Reflex Sight for RMS/RMSC Footprint Optics Ready Pistol

  • Micro red dot sight fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365XL/P365X, Ruger Max-9, Glock 43X MOS/48 MOS(not compatible with regular glock 43x/48 that are not MOS), Springfield Hellcat OSP, S&W Shield 2.0 Optics Ready, S&W MP9 EZ, S&W M&P shield plus performance center, S&W Equalizer, SCCY DVG-1 RDR, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistol/mounting plate/slide with RMS/RMSC screw pattern/footprint..
  • EASE OF USE: Cyelee CAT Green Dot Sight is always powered on with shake awake function. After four minutes without motion, illumination shuts off. Even the smallest tap or tilt will wake it up to the previous brightness setting..
  • RUNTIME: Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 200 microampere powers to give a very long battery life.It is perfect for daily carry..
  • RELIABLE:Reliable Design, a concealed carry optic must be ultra- dependable, because you are literally betting your life that it will be ready when called upon. CAT Green Dot Sight is waterproof and shockproof. The integrated co-witness notch provides an added sense of security in critical situations and allows for multiple aiming options..
  • DURABLE: Constructed from aerospace grade alum....
Check Stock

IWB Holster for Ruger LC9 – CF LH | Combat Veteran Owned Company | Concealed Carry Holsters Inside Waistband

  • ⭐️ LEFT-HANDED ⭐️ FITS ONLY RUGER LC9 IWB Holster for ULTIMATE concealed carrying.⭐️ PISTOL SLIDE OPTIC READY – Gun will fit your holster even if you have a slide mounted optic. However, holster will not accommodate laser or flashlight attachments.
  • ⭐️HAND-MADE IN USA BY COMBAT VETERAN OWNED BUSINESS – We are a team of U.S. military veterans using our combat experience with firearms to provide you with the most effective gun holsters on the market. We also provide outstanding customer service!.
  • ✔ SO COMFORTABLE, YOU WON’T EVEN KNOW YOU’RE WEARING IT! ✔ ADJUSTABLE RETENTION: Clicking sound when holstered for positive retention assurance. The retention can be adjusted on the holster by loosening or tightening the two screws on the bottom of the holster. ✔ ADJUSTABLE CANT: The angled cant on the holster can be easily adjustable from 0 to 20 degrees..
  • ✔ NO PRINTING THROUGH YOUR CLOTHES ✔ DEEP CONCEALMENT ✔ REMOVABLE CLAW & WEDGE – We spared no expense to provide you with the deepest possible concealment. We’re the ONLY holster Amazon offering both a claw AND a wedge which provides you with the deepest possible concealment and brings your holster closer to your body..
  • ✔ 100% MONEY BACK GUARANTEE ✔ LIFETIME WARRANTY- ....
Check Stock

CYA Supply Co. Base IWB Concealed Carry Holster Veteran Owned Made in USA - Fits Ruger LCP

  • Fits Ruger LCP (Optic Not Compatible) - No Light/Laser Attachments (Right Hand Draw Only).
  • IWB Holster - Inside The Waistband - Easily Adjustable Retention Pressure & Carry Angle (Cant) 0-15 Degrees.
  • Precision molds from CAD milled in house on our CNC. Made of .08" Thickness Boltaron Material - Belt Clip 1.5" wide - All Stainless Steel Black Powder Coat Hardware.
  • Posi-Click' Audible Retention Lock System - Sweat Guard covers full length of slide.
  • Made in USA - WE STAND BY OUR QUALITY: 100% Satisfaction Guarantee, No questions asked return policy and Lifetime Warranty..
Check Stock

CYA Supply Co. Base IWB Concealed Carry Holster Veteran Owned Made in USA - Fits Ruger LCP MAX

  • Fits Ruger LCP MAX (Optic Not Compatible) - No Light/Laser Attachments (Right Hand Draw Only).
  • IWB Holster - Inside The Waistband - Easily Adjustable Retention Pressure & Carry Angle (Cant) 0-15 Degrees.
  • Precision molds from CAD milled in house on our CNC. Made of .08" Thickness Boltaron Material - Belt Clip 1.5" wide - All Stainless Steel Black Powder Coat Hardware.
  • Posi-Click' Audible Retention Lock System - Sweat Guard covers full length of slide.
  • Made in USA - WE STAND BY OUR QUALITY: 100% Satisfaction Guarantee, No questions asked return policy and Lifetime Warranty..
Check Stock