Best Oil Pan Plug

Smartturbo Steel Turbo Oil Pan/Oil sump Return Drain Adapter Bung Fitting 10AN no Weld

M20 x 1.5MM Oil Drain Plug Tap Thread Repair Kit Oil Pan Screws Rethread Tool.
Used to tap the damaged thread and slightly enlarge the diameter of oil drain hole, then fit a new drain plug and washer..
Ideal for repairing sump, gearbox and differential drain plug threads..
Suitable for 18mm engine oil screw after skidded and rethread by 20mm chaser then twist into 20mm screw + gasket..
Contents: Tap: M20*1.5 1pc, Screw: M20 6pc, Aluminum gasket: M20 6pc.

This Oil Drain Plug Crush Washer Gasket Seal Rings is fit for Subaru Outback Legacy Impreza Forester BRZ XV Crosstrek..
Direct replacement for the part# 803916010, package including 10 pcs washers..
O.D.(outside diameter): 21 mm / 0.83 inch, I.D.(inside diameter): 16 mm / 0.63 inch , Thickness: 2.5 mm / 0.1 inch.
This 16 mm / 0.63 inch oil drain plug gaskets crush washers is needed for every oil change, it helps to seal the drain plug and oil pan surfaces..
Package: 10pcs oil drain crush washers. What you will get is exactly as pictures shows, pls check size information carefully before ordering..

Ideal solution - this universal oil drain plug is designed to replace an original plug to help prevent oil leaks if the threads on the original plug or the oil pan are stripped or the plug is missing.
Check clearance - designed to fit pans with factory drain plugs from .500 inch to .750 inch or M12 to M18.
do not use on certain Honda, VW or other vehicles that lack safe clearance from internal components.
Dependable design - manufactured to precise specifications to create the best possible seal in place of the factory drain plug, and provide reliable service.
Trustworthy quality - backed by a team of product experts in the United States and more than a century of automotive experience.
Support available - every Dorman part is backed by Dorman's ASE Blue Seal Certified technical support team.

In the cold winter, use these two engine heater pads before starting the car to bring the oil to the right temperature and thus reduce oil consistency, which will lubricate the engine better and reduce its wear..
Peel off the paper backing from the oil pan heater pad and stick the pad to a clean metal surface, then plug the power cord into the outlet. Once attached, the pad will be less likely to be removed..
Composed of hard-wearing silicone, these two engine block heater pads are absolutely waterproof, oil-proof, low-temperature resistant and durable enough to serve you for a long time..
These 150W/120V oil pan heater pads have a built-in automatic thermal protector that keeps the heating temperature at a constant 90°C, effectively preventing safety hazards caused by high temperatures..
【Warm Tips】 Our engine heater pads are only suitable for automotive parts with metal surfaces, such as oil pan, reservoir and transmission pan. Because of the importance of safety and product life, we do not recommend other uses..

Keep Engine Warm: On a cold winter day, use the Automotive Electric Silicone Heating Pad to start up for perfect engine oil temperature. Device heats the oil quickly for those cold start mornings..
Improve Oil Flow: Transmits heat continuously to keep engine oil as a thin fluid, giving you instant lubrication when starting your engine. Reduces wear and tear. Increases engine longevity and extends transmission life..
Easy To Install: Clean application surface, peel off paper backing to adhesively attach pad to outside of clean oil pan or other metal surface, then plug the power cord into any wall outlet for instant warming..
Built To Last: Constructed with silicone coat covering for oil resistance, acid resistance, and added strength and longevity. Product with double-sided adhesive on the back, can be directly stick on the heated products, the highest heat resistance temperature to 200℃, will never fall off..
Various Warming Applications: Designed to heat fluids with any metal surface such as engine oil pan, fuel tank, reservoir, transmission pan, and more. For metal surfaces only, keep away from plastics..

...ng you instant lubrication when starting your engine.
Increases engine longevity and extends transmission life.
EASY TO INSTALL: Clean application surface, peel off paper backing to adhesively attach 4-inch x 5-inch (10.2cm x 12.7cm) pad to outside of clean oil pan or other metal surface, then plug the 5.75-foot (1.8m) 2-prong power cord into any wall outlet for instant warming.
Once applied, the stick on oil pan heater remains permanently installed on any metal surface (seal edges for longer adherence.
BUILT TO LAST: Flexible heating pad is rated at 120 Volts and 250 Watts.
Constructed with silicone coat covering for oil resistance, acid resistance, and added strength and longevity.
Power cord stays attached : not removable.
FOR AUTO WARMING: 250-watt car engine heater pad designed to heat fluids with any metal surface such as engine oil pan, fuel tank, reservoir, transmission pan, and more.
For metal surfaces only : Keep away from plastics.
Caution : Extremely hot, built-in automatic thermostat (not programable) keeps the pad at a constant temperature (once temperature falls below the maximum temperature of 194 F (90 C), it starts heating again).
Recommended for automotive applications : Not for personal u....

Anti-leak and Anti-vibration function: seals the oil pan from the inside and counteracts vibration. The high-tech O-ring material expands upon contact....
Engine and Oil Pan Protection: the seal and anti-vibration mechanism reduce risk of engine damage due to catastrophic oil loss caused by loss of drain....
Faster installation: the SmarTorqª simple and unified torque setting system and quick plug identification system allows a more effective working....
Re-usable: the plug can be reused multiple times. The same goes for the robust O-ring which is a permanent seal saving cost for new gaskets....
Eco-friendly: reduces risk for oil leaks, less material waste due to re-usable seal, black coating is free of harmful Cr6, so parts can be easily....

...90℃, prevent the safety hazards caused by high temperature..
Easy to Install: Clean and dry the flat surface of the device, peel off the paper backing and apply the oil pan heater, using magnets/adhesives can extend the adhesion time (magnets and adhesives not included).
plug the 120V 2-prong power cord into the wall outlet and heat for 10 to 15 minutes..
Wide Range of Applications: Two silicone heating pads can be used on the transmission and the engine respectively. Unlike block heaters that do not adhere to aluminum engine oil pans, 150W automotive engine heating pads are used to heat fluids on any metal surface such as engine oil pans, transmissions, diesel tractor engines, snow blowers, generators, etc..
for metal surfaces only: keep away from plastic.
note: extremely high temperatures, do not touch..