Best Oil Pan Hole Plugs

Calphalon Triply Stainless Steel 10-Inch Omelet Pan

  • Easy Clean and Care - This egg pan have Flat design, No residue food gap. can easy wash by Hand, dry and care with cooking oil to keep non-stick and rust-proof.
  • Sturdy handle with hole for convenient hanging.
  • Premium Material - Our fried egg pan made of the optimal material, which is featured by the non-stick coating of Maifan stone,it is evenly heated, saves energy, not easily damaged and has a long service life..
  • 4-Cup Design - Different from ordinary frying pans, our egg frying pan has a 4-cup design, which can fry four eggs or different burgers or four different foods at the same time to meet the daily breakfast needs of ordinary families..
  • Non-Stick Pan- Dense particle design can effectively prevent food from sticking. Marble nonstick pan enables healthy little-to-no-oil cooking, ensuring a better life for you and your family..
  • Long-lasting Pan - Made of heavy-duty commercial quality Material , more solid than other egg pans, the ultimate pan will last for years, decades even generations with proper care, you may no need to buy another..
Check Stock

ABN 131-Piece Metric Thread Repair Set – Damaged Helicoil-Type Thread Master Repair Kit for Automotive Repairs

  • ...e Stronger Internal Threads]: The ABN Helicoil Rethreading Tool Kit Metric Stripped Thread Repair Kit is a course threads M5 to M12 restorer 131-piece set made of chrome-vanadium with stainless steel coils to restore damaged threads in steel, cast iron, and aluminum spark plug engine repairs, stripped oil pan drain plugs, and more.
  • [Contents]: Thread restorer kit metric set includes 5 insert installation tools, 5 lug break pin tools, 5 twist drill bits, 1 hex key, 5 thread taps, 110 wire thread inserts, carrying case, and instructions.
  • [Perfect Sizes]: Twist drill bit sizes 5.2mm, 6.3mm, 8.3mm, 10.5mm, 12.5mm.
  • Screw tap and thread insert sizes M5x0.8x6.7mm, M6x1.0x8.0mm, M8x1.25x10.8mm, M10x1.5x13.5mm, M12x1.75x16.3mm (where M12 means thread outer diameter = 12mm, 1.75 means pitch of thread = 1.75mm).
  • [Quick Organization]: Steel carrying case with latch and molded plastic inside tray insert to keep universal thread repair tool pieces separated and easy to access.
  • Includes bottom recesses for organizing the coils in included plastic bags.
  • [Easy to Use]: Remove your damaged thread by using an included twist drill bit.
  • Load the thread insert into installation tool.
Check Stock

ValvoMax Oil Drain Valve - No Tools, No Mess, Fast Drain - for M16-1.50 - Stainless Drain Hose Attachment

  • PREMIUM QUALITY - Our Votex drain plugs are MADE IN USA. From the Stainless Steel bar stock material, CNC machine that cuts our plug right down to the hands that craft each individual one. We carefully and pridefully construct our plugs here in our home state of Wisconsin. This ensures that your plug will be manufactured with real quality stainless steel (Not Pot Metal) that will last for countless years to come. Included with the drain plug is an aluminum crush washer.
  • HIGH TEMPERATURE NEODYMIUM MAGNET – Our plug uses a rare earth high strength neodymium magnet, rated specifically to function in high temperature environments extracting unwanted ferrous particles from your vehicles engine. Neodymium magnets are one of the strongest magnets available on the planet, giving the strength to hold weights over 2.2lbs. This empowers our plug with enormous strength to effectively pull these unwanted metals out of your motor oil resulting in longer engine life..
  • PREMIUM STAINLESS STEEL – The drain plug market has a plethora of options which are constructed of aluminum. Aluminum is an inferior metal choice due to its strength and commonly shear/snap leaving you with a broken plug stuck in your oil pan. Our goal is to provide plugs of th....
Check Stock

Arctic Cat 4 Stroke 1100cc Snowmobile Oil Change Kit OEM 6639-528

  • Genuine Arctic Cat Product, OEM Part Number: 6639-528.
  • Fits Arctic Cat: 2007-2016 5000, 2007-2016 9000.
  • Includes one gallon of synthetic C-TEC4 oil, oil filter, belly pan plugs, o-ring, washer and disposable funnel. Exclusive formulation includes additives that help prevent deposit formations, ring.
  • Provides superior performance in ALL operating conditions including in the extreme cold. Synthetic base stocks offer high lubricity that protects engine from wear and scuffing..
  • Arctic Cat synthetic C-TEC4 engine oil is purpose-built and proven for Arctic Cat 4-cycle snowmobile engines, and is the ONLY oil recommended by Arctic Cat engineering..
Check Stock

Bottle Jack/Floor Jack Oil Reservoir Rubber Filler Plug Bung, Horizontal Jack Bung for Hydraulic Jack Oil Reservoir Filler Hole, 8mm - 12PCS

  • Befantasway oil filler plugs fit hole of 8mm/0.31 inch..
  • 12pcs oil filler plugs in package. NOTE: Jack not included.
  • Work for hydraulic horizontal jack of most brands..
Check Stock

Dorman 095-156CD Aluminum With Rubber Coating Drain Plug Gasket, Fits M12 Compatible with Select Lexus / Scion / Toyota Models, 2 Pack

  • Abundant oil plug washer set: you will receive 48 pieces of oil drain plug washers, designed in blue, sufficient for your long-term using needs in daily life, you can also share some of them with your families or friends, bringing them lots of convenience.
  • Reliable workmanship: these crush washers for oil plugs are made of quality aluminum, compact and sturdy, not easy to wear or deform, having nice rust prevention performance, which can well replace your worn-out gaskets, providing you with a satisfied using experience.
  • Appropriate size: the outer diameter of the oil pan drain plug gasket is approx. 0.82 inch and its inner diameter is approx. 0.47 inch, besides, it is approx. 0.07 inch in thickness, which is suitable for many kinds of cars.
  • Convenient to apply: these oil drain bolt gaskets are convenient for you to install, you can easily install them on your drain plugs by hand, not occupying too much energy and time, which can reduce the risk of oil spilling.
  • A variety of applications: these drain plug washers can be applied to many kinds of automobiles, specifically, they are compatible with most types of cars of Toyota, such as Prius, Tundra, Sienna, Highlanda, Lexus, Avaron, Camry, Tacoma, 4Runner, RAV4, Scion TC, FJ, and Cruiser, improving yo....
Check Stock

Votex - M16 X 1.5 MM Stainless Steel Engine Magnetic Oil Drain Plug with Neodymium Magnet - Made In USA - Part Number DP009

  • PREMIUM QUALITY - Our Votex drain plugs are MADE IN USA. From the Stainless Steel bar stock material, CNC machine that cuts our plug right down to the hands that craft each individual one. We carefully and pridefully construct our plugs here in our home state of Wisconsin. This ensures that your plug will be manufactured with real quality stainless steel (Not Pot Metal) that will last for countless years to come. Included with the drain plug is an aluminum crush washer.
  • HIGH TEMPERATURE NEODYMIUM MAGNET – Our plug uses a rare earth high strength neodymium magnet, rated specifically to function in high temperature environments extracting unwanted ferrous particles from your vehicles engine. Neodymium magnets are one of the strongest magnets available on the planet, giving the strength to hold weights over 2.2lbs. This empowers our plug with enormous strength to effectively pull these unwanted metals out of your motor oil resulting in longer engine life..
  • PREMIUM 304 STAINLESS STEEL – The drain plug market has a plethora of options which are constructed of aluminum. Aluminum is an inferior metal choice due to its strength and commonly shear/snap leaving you with a broken plug stuck in your oil pan. Our goal is to provide plugs o....
Check Stock

Votex - M14 x 1.5MM Stainless Steel Engine Magnetic Oil Drain Plug with Neodymium Magnet - Made In USA - Part Number DP001

  • ... will install in place of your current drain plug. It will arrive with an aluminum crush washer which is recommend to be replaced with every oil change. Simply wipe the magnet clean of debris during oil change. USES 17MM WRENCH. FOR REPLACEMENT WASHERS SEARCH PART # B07ZQP2M94.
  • PREMIUM QUALITY - Our Votex drain plugs are MADE IN USA. From the Stainless Steel bar stock material, CNC machine that cuts our plug right down to the hands that craft each individual one. We carefully and pridefully construct our plugs here in our home state of Wisconsin. This ensures that your plug will be manufactured with real quality stainless steel (Not Pot Metal) that will last for countless years to come. Included with the drain plug is an aluminum crush washer..
  • HIGH TEMPERATURE NEODYMIUM MAGNET – Our plug uses a rare earth high strength neodymium magnet, rated specifically to function in high temperature environments extracting unwanted ferrous particles from your vehicles engine. Neodymium magnets are one of the strongest magnets available on the planet, giving the strength to hold weights over 2.2lbs. This empowers our plug with enormous strength to effectively pull these unwanted metals out of your motor oil resulting in longer engine life..
Check Stock

Arctic Cat New OEM 4-Cycle Synthetic C-Tech4 3000 Oil Change Kit, 7639-042

  • Genuine Arctic Cat Product, OEM Part Number: 7639-042.
  • Includes one gallon of synthetic C-TEC4 oil, oil filter, belly pan plugs, o-ring, washer and disposable funnel. Exclusive formulation includes additives that help prevent deposit formations, ring.
  • Provides superior performance in ALL operating conditions including in the extreme cold. Synthetic base stocks offer high lubricity that protects engine from wear and scuffing..
  • Arctic Cat synthetic C-TEC4 engine oil is purpose-built and proven for Arctic Cat 4-cycle snowmobile engines, and is the ONLY oil recommended by Arctic Cat engineering..
Check Stock