Best Mini Current Transformer

Suraielec 120W Low Voltage Transformer with Photocell Sensor and Timer, 120V AC to 12V/15V AC, Landscape Lighting Transformer with 2 Independant Zones,Weatherproof for Pathway Lights, Step Light

  • 【Photocell Sensor & Countdown Timer】Landscape transformer with dusk to dawn sensor automatically turns low voltage pathway lights on at sunset, and off when sunrise. With countdown timer setting, you can illuminate spotlights and deck lighting auto on at dusk , then off at 4, 6, 10 hours interval as needed. Convenient and energy efficient for daily use..
  • 【2 Zones for Independent Control】Suraielec outdoor light transformer is equipped with two independently controlled outputs, allowing to setup 2 different landscape systems all controlled with a single transformer. That’s, you can set your front yard lighting stay lit till dawn while the backyard lights is set to be off 6 hours after sunset. Control home lighting separately..
  • 【Easy to Program & Memory Function】Easy to operate with a push of button, the outdoor low voltage transformer is designed with 3 lighting modes: manual on/off- auto on/off- on at sunset and off 4/6/10 hours later, choose any preferred mode by Zone button. Features memory function, transformer retains its last mode setting after power outage..
  • 【Multi-Tap Outputs & Overload Protection】120W landscaping transformer converts 120 volt current to a low voltage current ( Selectable 12V AC /15V AC), achieving a safe an....
Check Stock

4Pcs 100A/50mA SCT013000 Non-invasive Split Transformer Sensor SCT-013-000 Split Core Current Sensor Transformer

  • ❤Applications❤Suitable for current measuring, monitoring and protection of AC motors, lighting equipment, air compressors, etc..
  • ❤Reliability❤Fully compatible with most similar products.
  • the number of opening and closing times is not less than 1000 (tested at 20℃).
  • this split core current transformer is particularly suitable which can use for a long time for DIY use and it works well with arduino and raspberry pi..
  • ❤Specification❤Opening size: 13mm × 13mm.
  • lead length: 1.5 meters, standard Φ3.5 three-pin plug outpu.
  • Non-linearity ± 3% (10% ~ 120% rated input current) two output forms of current and voltage (voltage output type built-in sampling resistor)..
  • Package Include 4Pcs x SCT-013-000 Split Core Current Transformer Sensor.
Check Stock

Mini Mounted Point Set, 50 pcs.

  • The transformer has over current, over voltage, over heat protection.
  • With a drill bit, it becomes a hand drill, with a grinding wheel, it becomes a hand grinder, and with a milling cutter, it becomes a hand mill, very easy to use.
  • Wide application range and flexible to operate.
  • The handheld machine has seven standard grinding tools which is varied.
  • Suitable for processing wood, engineering plastics and soft metals.
Check Stock

Mini Welding Machine,110V 250A ARC Stick Welder IGBT Hot Start Inverter Welder with 3.6lbs Ultra Light Weight,Full Set of Welding Equipment & Extra 5 Welding Rods

  • 【250A Powerful Welding】- Maximum 250A ARC output for whole day high efficient welding with superior industrial transformer to meet all challenging welding tasks. Compatible with 1/16″- 3/32″- 1/8″(1.6-2.5-3.2mm) welding rods..
  • 【MINI Energy Saving Design】- ONLY 3.6LBS ultra light weight, with retractable shoulder strap for easy carrying and continuous energy saving welding outdoors for ceiling, escalator, iron door, gas pipeline, iron frame, machine, fence, billboard and more..
  • 【Quick Arcing】- 820µF large capacitor is equivalent to 2 regular ones. Providing ultra-fast arcing for prewelding and steady operation current without arc interruption..
  • 【Convenient Current Adjustment & Well Protection】- Stable & adjustable current from advanced IGBT tech, which makes current adjustment smooth & easy with one rotary knob attached to the machine. Guarantees overheat protection, short circuit protection, overload protection, over current & voltage protection..
  • 【Easy to Operate】- Arc welding machine is easy to use even for beginner with clear LCD current digital display and supplied welding mask & gloves. Full set of welding accessories & extra 5 welding rods provided for plug and play welding on various targets like carbon steel, alloy stee....
Check Stock

ACEIRMC 8pcs HX711 Weighing Sensor Dual-Channel 24 Bit Precision A/D Module Pressure Sensor for Arduino Raspberry Pi Microcontroller

  • Analog Current Meter Module. Transformer can only sense AC.
  • This electricity sensor is based on TA12-100 current transformer, which can transform AC signals of large current into small amplitude signals..
  • 3-wire electronic block interface, input 5V - GND. S pin is the output analog voltage value..
  • You can use jumpers to select the parallel output of the output to adjust the range of analog values that are output..
  • On-board 3P and 4P connecting interface for current signal output can be easily connected with your MCU development board.
Check Stock

AC Current Sensor Transformer, PZCT-02 Split Core Current Transformer Coil Sensor for 100A Amp Energy Meter Used for Energy Meter in Special,Current Sensors

  • ❤Specification❤Opening size: 13mm × 13mm.
  • lead length: 1.5 meters, standard Φ3.5 three-pin plug outpu.
  • ❤Applications❤Suitable for current measuring, monitoring and protection of AC motors, lighting equipment, air compressors, etc..
  • ❤Reliability❤Fully compatible with most similar products.
  • the number of opening and closing times is not less than 1000 (tested at 20℃).
  • this split core current transformer is particularly suitable which can use for a long time for DIY use and it works well with arduino and raspberry pi..
  • Non-linearity ± 3% (10% ~ 120% rated input current) two output forms of current and voltage (voltage output type built-in sampling resistor)..
  • Package Include 2Pcs x SCT-013-000 Split Core Current Transformer Sensor.
Check Stock

Beleeb 20Amp Variable Transformer Auto AC Voltage Regulator Power Supply, 2000VA Max, 0~130 Volt Output

  • a variable AC input to a transformer input DC bridge rectifier to produce a variable output.
  • The adjustable voltage transformers does not convert AC to DC. It requires an AC input and the output is also AC. Also, the unit will not affect the cycle rate from the power company. If your power system is providing 60Hz, the Variac auto transformer will not change that, the ouput will be an undistorted 60Hz. This unit is rated up to 20 Amps or 2KVA Peak (16A Continous)..
  • Power: 2000VA,Input voltage: 110V, Input current: 18A, Output voltage: 0-130V, Rated output current: 15.38A (Continuous operation for 2 hours, 003c10A can work continuously.
  • This variable transformer is the perfect speed controller. The speed is infinitely variable, and because a transformer doesn't chop up the AC waveform like electronic speed controllers do, there's no noise, humming, etc..
  • If you're planning on using this as an "industrial" or bench-top supply with heavy loads, I'd recommend examining the brushes and adjusting the spring pressure on the windings. This can improve performance by reducing brush-contact sparking. Otherwise, this device is ready to work right out of the box..
Check Stock

Doorbell Transformer, 16.7 ft Charging Cable 18V 500mA Video Doorbell Power Supply Adapter Compatible with Ring Doorbell/Zmodo Doorbell (Black)

  • 【Product Features】18V Doorbell Transformer, plugs into your standard 110 v/120 v outlet and converts to 18 volt 500 ma AC current. No more need to take your doorbell down to charge. Video doorbell Transformer can keep your device constantly powered..
  • 【Compatibility】18V 500mA Doorbell Transformer compatile with Zmodo smart greet wifi doorbell / Nest Hello doorbell.(Before purchasing, Please confirm that the voltage and current required by the doorbell are consistent with this power supply.).
  • 【Extra long cable】16.7ft is long enough, it can connect to your doorbell perfectly, don't worry about the distance between the socket and the doorbell..
  • 【Easy to install】(Regardless of positive or negative polarity).Simply attach the two rings to the doorbell and tighten the screws. The wire ring design makes it easier to install and helps ensure the Transformer is firmly connected to the doorbell. The wires are sturdy and flexible enough not to be easily torn..
  • 【After-sale service】: If you are not completely satisfied with our products, you can ask for a replacement or a full refund.If you have any questions, please feel free to contact us..
Check Stock

Lemax Christmas Village Holiday Tower, Multicolored

  • UpBright (w/ 3-Output Jacks) New Global 3V AC / DC Adapter Compatible with Lemax Item No.: 54100 54100A 54100W UR4120030050G for Village Collection Christmas Village Town Spooky Town Village Christmas Lighted Accessory 3 port 3.0V DC 500mA 3 Volts 3VDC 500 mA DC3V 0.5A 3 V 3.0 VDC Class 2 Transformer Power Supply Cord Cable PS Battery Charger Mains PSU (w/ Three ear phone plug end.).
  • Compatible with: Lemax Village Coventry Cove Item No.: 54100KM 3V DC 500mA Class 2 Transformer.
  • Lemax Enchanted Forest Item # 54100 Cat. No.: AY-3D-0.5-E SKU: 289-2410 3VDC 500mA Class 2 Transformer.
  • Carole Towne #87058 # 87058 Power Adapter.
  • Carole Towne Collection Item# 087058 87058 LEMAX Model # 54100 3 Volts 3V with 3-Output Jacks 3VDC 500mA AC Power Adapter.
  • Compatible with: Carole Towne Collection Lemax Shimmering Spruce Tree 1999 #54100 lighted 9 Inch 12" Christmas Tree.
  • 1999 LEMAX, INC. VILLAGE COLLECTION BATTERY OPERATED "LIGHTED GAZEBO" W/BOX Uses 2 AA batteries.
  • Lemax Village Collection Millennium 2000 Celebration Millennium Firework.
  • 1996 Lemax Item No. 64123 Village Collection 20 Mini Light Multi Color Christmas Dual Power.
  • Lemax Item No. 74163 Village Collection Head Up Reindeer Lighted Lawn Sculpture.
Check Stock