Best Electrical Current

AC Current Sensing Switch Adjustable Current 0.2~30A Flameproof ABS Self Powered Sensing Switch Users Manual (Normally Open)

  • ✔ Automation Equipment Control -- Control various automation industrial equipment, flashlights, buzzers, relays, microcontrollers, or other electrical load devices. An ideal choice for automated industrial equipment and power monitoring.
  • ✔ High Accuracy Stable Performance -- Compared with traditional device, thermal protectors and other devices, it has the advantages of high accuracy, stable performance and long service life. Installation Form: Guide Rail 35mmDIN.
  • ✔ Convenient Monitoring Detecting Current -- The current sense switch is for safety, simple, and convenient monitoring or detection of current in the electrical equipment. Threading Hole Diameter: 8mm. Shell Material: Fireproof ABS.
  • ✔ Used In Industries Current Monitoring -- Widely used in substation, frequency conversion speed control device, inverter device, electrolytic plating, electric locomotive, street lamp monitoring, coal mine and other automation industries that need current monitoring.
  • ✔ Electromagnetic Mutual Inductance Of Current -- Using the principle of electromagnetic mutual inductance of current, the advanced output detection, monitoring and protection alarm products developed by the non-power supply technology are adopted.
Check Stock

Sundown Audio Salt Series Monoblock Digital Class-D Amplifier (Salt-8 8000W Rms)

  • Power – 500 Watts Max x 2 @2-Ohms, 250 Watts Max x 2 @4-Ohms, 1000 Watts Max x 1 Bridged @4 Ohms.
  • Full Range – With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers.
  • Class A/B Topology – Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal.
  • Mosfet Power Supply – A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry.
  • Variable Gain Control – The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier.
Check Stock

300 Pcs 22-16 16-14 12-10 AWG Insulated Fork Spade U-Type Wire Connector Electrical Crimp Terminal

  • Material: Fully Insulated Plastic + Copper.
  • RED- AWG 22-16(0.5-1.5mm²), USA screw 8#, Max current: 19A.
  • BLUE- AWG 16-14(1.5-2.5mm²), USA screw 8#,Max current: 27A.
  • YELLOW- AWG 12-10(4-6mm²), USA screw 8#,Max current: 48A.
  • Used For Electrical Repair - A Handy Assortment Of Terminals And Connectors Included For Quick Electrical Repairs.
Check Stock

allsun Automotive Electrical Circuit Tester Probe 2-24V DC Pen Vehicle Power Diagnostic Tool Auto Wire Test Light Device

  • 【CIRCUIT TESTER WIDELY APPLICATION】Automotive Power Electric Circuit Tester EM287 can be used to test continuity, test polarity of a voltage, check lamp, check electric motor, follow and locate short circuits, test for bad ground contacts and measure dc voltage from 2V to 24V etc..
  • 【HAS LONG TEST LEAD】Automotive Test Probe has long test lead. The cable length is about 5m(16ft) which allows you test any electrical system easily..
  • 【OVERLOAD PROTECTION】Automotive Electrical Tools Overload Protection: When the current exceeds 8A, the unit will disconnect the current automatically..
  • 【EASY TO USE】Car Electrical Test Tool, it's easy to use. Battery by the vehicle battery directly. The illumination function enables automotive technician to test the electrical system in the darkness..
  • 【INSUFFINIENT LIGHT ENVIRONMENT】Electrical System Diagnostic Tool takes the insufficient light environment in consider, the tool built in flashlight to indicate the DC voltage measurement..
Check Stock

Female Led Relationship Guide: How to Be a Femdom and Have the Perfect Female Domination Domestic Discipline Marriage or Relationship

  • ... injector test and cleaning, component activation and testing, poor ground testing, tracking and locating shorts, etc. It beeps to indicate the result while testing and is the most versatile and practical dedicated circuit repair test tool its users have ever had..
  • 【Best Electrical Tester】This electrical tester can supply power to electrical components, with reverse connection protection circuit, it is an advanced test tool for positive and negative line judgment. It shortens the diagnostic time of all 6 to 40 volt vehicle electrical systems, and is suitable for DC 6-40v cars, motorcycles, trucks, buses, construction vehicles, ships, tractors, mining vehicles and other vehicles that use DC circuits..
  • 【Quick Self Test & Relay Test & Circuit Breaker Protection】GODIAG GT101 circuit tester has quick self test function, which can ensure the tester is in good condition before use. The GT101 Probe Tester Kit can quickly detect whether the relay is normal. The tool has a built-in 10 amp circuit breaker, the input current can be reversed to form a loop power supply, and it automatically trips when the current exceeds 20A, protecting the equipment and extendin....
Check Stock

HILTEX 40508 Digital Multimeter | Diode and Transistor Tester | AC/DC Volt Test | Audible Continuity | Test Probes | Voltmeter | Multitester Meter |Volt/OHM Meter (VOM) | Measure Voltage Test

  • METER TESTER: A portable, general purpose digital volt meter multimeter to test wires, batteries, cells, fuses and other electrical components..
  • VOLTAGE TESTER: A safe and accurate voltage and current tester for troubleshooting electrical problems in automotive and household settings. Check for battery quality, automotive circuits, and charging systems..
  • LARGE DISPLAY: Includes large, easy-to-read LCD screen that measures 3-1/2 digits and accurately measures resistance, current and voltage with maximum reading up to 1999..
  • TEST LEADS: Red and black leads to test electrical system components including diodes, transistors, wires, fuses, and battery testing on electrical equipment..
  • ENSURE SAFETY: Built-in overload protector keeps the meter from any possible damage, Checks continuity of wires, fuses, and electrical components. Overload indicator and low battery indicator..
Check Stock

OWON Current Clamp Meter Multimeter CP-05+ Clamp Current Probe 200KHz 400A for Oscilloscope 4A 40A 200A 200-400A Test Range with BNC Connector

  • ...le.Low noise level, and high detection accuracy..
  • ¡¾Easy to Use¡¿The current clamp has range selection settings, set by a slider switch on the handle of the probe. In use there is no need to break into the circuit or disturb the isolation as the opening jaws simply clamp around the current carrying conductor. No electrical contact is required. These current clamps have been designed for use with oscilloscopes..
  • ¡¾Portable¡¿Special value kit for electrical professional who is looking to add on DC and AC current measurement capabilities to their DMM. Includes a roomy carry case to hold and protect your meter and current clamp, plus extra storage for your AC/DC Current Probe. Auto zero at power on, relative zero correction .Low noise level, and high detection accuracy. 100% money back guarantee & 1YEAR WARRANTY..
Check Stock

Blackmagic Design Pocket Cinema Camera 6K Pro (EF Mount) with SanDisk Extreme PRO 128GB SDXC Memory Card (UHS-I/V30/U3/Class-10), 2X Seller Supplied Replacement Batteries & More

  • Multiple Outlet Wall Plug: 12 AC outlets with 1680J Surge protector wall mount, 15A Current Limit switch, Safety ground indicator Light, surge protection indicator light, 2 hanging hole for all types of Standard Electrical Outlets.
Check Stock

Harmony Audio HA-A1500.1 Car Stereo Class D Amp Mono 3000 Watt Subwoofer Amplifier - 1 Ohm Stable - Includes Bass Remote

  • Power – 500 Watts Max x 2 @2-Ohms, 250 Watts Max x 2 @4-Ohms, 1000 Watts Max x 1 Bridged @4 Ohms.
  • Full Range – With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers.
  • Class A/B Topology – Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal.
  • Mosfet Power Supply – A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry.
  • Variable Gain Control – The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier.
Check Stock