Best Metalworking For Beginners

5pcs High Speed Steel Center Drill Set, Center Drill Bits, Combined Drill, Countersink Lathe Mill Tool Set, HSS 60 Dgree 1.5/2/2.5/3/4mm for Lathe Machines & Remove Chips

  • ★【For Metalworking】These center drill bits are used in metalworking to provide a starting hole for a larger-sized drill bit..
  • ★【For Conical Indentation】They can also be used to make a conical indentation in the end of a workpiece in which to mount a lathe center..
  • ★【Material】Made from high speed steel, these center drill bits are of high hardness and good wear resistance.Drill accurate center holes in material prior to turning, or use as a starter bit for accurate holes..
  • ★【5 Sizes】There are total 5 pieces center bits in this set that can be used to drill holes in different sizes..
  • ★【Applications】Widely used on lathe machines, these center drill bits can cut easily and remove chips smoothly.Available for all Kinds of Materials: Metal, Alloy, Copper, Iron, Wood, Aluminum, and so on..
Check Stock

35 Pack 1/4 Abrasive Flap Wheel Sander Set WENORA 80 Grit Aluminum Oxide Flap Wheels Cylindrical Shape Sanding Wheel 7 Sizes

  • 【PREMIUM MATERIAL】 High quality aluminum oxide coated abrasive cloth provides a solid and durable grinding power combined with high efficiency and long life to give you that premium performance that you need and expect from your tools..
  • 【SHANK DESIGN UPGRADE 】 we upgraded the ordinary round shank to 1/4-Inch hex shank to improve the firmness at high speeds. Even in large-area heavy-duty machining, there will be no loosening or slipping..
  • 【METALWORKING APPLICATIONS】 The mounted flap sanding wheels are commonly used in metalworking as a grinding or deburring wheel to clean up welds and cuts in iron, stainless steel and metal alloys. Also used for removing layers of rust and paint on flat metal surfaces.
  • 【WOODWORKING APPLICATIONS】These abrasive wheels suitable to be used as sanding wheels for electric drills, cordless drills, die grinders and.for the stripping of old layers of paint when during resurfacing projects or sanding and finishing contoured wood surfaces..
  • 【VARIETY OF WHEEL SIZES】Our 35 piece set includes (5) 1” thick sanding wheels with 1/4” hex shank in each of the 7 different sizes.
  • 0.78", 1", 1.2", 1.58", 2", 2.36" and 3.14" widths.
Check Stock

Mixiflor 50 Pack Abrasive Flap Wheel Sande,1\ x 1\ x 1/4\ Shank Mounted Flap Wheels,80 Grit Aluminum Oxide for Remove Rust and Weld Burr,1/4 Shank Fits All Drills

  • MOST COMMON SHANK SIZE: The 1/4 shank makes these abrasive wheels suitable to be used as sanding wheels for electric drills, cordless drills, die grinders..
  • METALWORKING APPLICATIONS: The mounted flap sanding wheels are commonly used in metalworking as a grinding or deburring wheel to clean up welds and cuts in iron, stainless steel and metal alloys. Also used for removing layers of rust and paint on flat metal surfaces..
  • WOODWORKING APPLICATIONS: Often used for flap sander wheels in woodworking for the stripping of old layers of paint when during resurfacing projects or sanding and finishing contoured wood surfaces..
  • PREMIUM MATERIALS: High quality aluminum oxide coated abrasive cloth provides a solid and durable grinding power combined with high efficiency and long life to give you that premium performance that you need and expect from your tools..
  • VARIETY OF WHEEL SIZES: 50 Pack flap sanding wheels with 1/4 inch Shaft, 1 inch Thickness and 1 inch Outer Diameter..
Check Stock

The Beadsmith Two-Sided Chasing Hammer - 10.75 Inches Wooden Handle, 2.25” Steel Head with a 14mm Ball Pein & 28mm Domed Face - Tool Used to Add Texture and Dimension to Metalwork

  • ...wire wrapping and riveting techniques to form steampunk, rock or heavy metal looks. Use in conjunction with embossing hammers to form domed shapes and other patterns. To protect your workbench and other surfaces, it’s best to work on bench blocks or with dapping or doming blocks..
  • GREAT FOR ALL SKILL LEVELS: These metalworking techniques can be precise or forgiving, making them great for beginners and professionals alike. DIY hobby crafters will discover that with some experimenting, unintentional designs can be transformed into beautiful works of art, while jewelry designers and metalsmiths will appreciate the accuracy of these hammers..
Check Stock

The Beadsmith Interchangeable Texture Hammer - Metal Elements - 9.5 inches, 75mm, 13.4oz Steel Head with Twelve 23mm Faces - Texturing Tool Used to Add Patterns & Dimension to Metalwork

  • ...tom made earrings, bracelets, necklaces, and rings. Use different faces to form unique textures and patterns, or form steampunk, rock or heavy metal looks. Use in conjunction with embossing hammers to form domed shapes and other patterns..
  • GREAT FOR ALL SKILL LEVELS: These metalworking techniques can be precise or forgiving, making them great for beginners and professionals alike. DIY hobby crafters will discover that with some experimenting unintentional designs can be transformed into beautiful works of art, while jewelry designers and metalsmiths will appreciate the accuracy of these hammers..
  • THE BEADSMITH - 40 years in the making! Trusted to bring you the best quality beads, tools, and supplies. Making jewelry should be a positive experience. Let us join you in the creative journey. Our experts are here to help. Your satisfaction is important to us. Contact us with any quality issues or concerns..
Check Stock

S erounder Hold Down Clamp, Metal Quick Acting Hold Down Clamp Set for T-Slot T-Track Woodworking Tool(T Screw and Plastic Knob Nut Just)

  • ✔Scope of Applications：The T-slot clamp is ideal for fixing, positioning and fixing workpieces in many woodworking or metalworking applications, including planers, drilling machines, CNC, table saws, fixtures, panels, vertical milling machines, etc.
  • ✔Easy to Install：The hold-down clamp is easy to install, and the flush pressure is applied to any position along the flush-mounted t-slot t-shaped track. Slide into the t-shaped track and fasten it by turning the knob nut.
  • ✔Multifunctional Usage：This is a set of compression fixtures for t-slot rails. These t-track hold-down clamps can be used in many woodworking and metalworking applications for workpiece fixation, positioning and fixing.
  • ✔Premium Materials：Our t-track hold-down clamp is made of high-quality metal materials, sturdy and durable, and has a long service life. Exquisite craftsmanship and exquisite operation ensure its super durability.
  • ✔What You Get：You will receive 1 x whole clamps set (threaded rod, t screw, knob nut, slide block, washer, clamp board) or 1 x t screw and plastic knob nut just.For a better customer experience, we will optimize the product from time to time.
Check Stock

BUCKTOOL Dual Speed 1" x 42" Belt Disc Sander Combo, Bench Knife Sharpener with Large Work Table, Professional Benchtop Belt Sander with Direct-drive 4.8A Brushless Motor for Metalworking, BD1801DS

  • DUAL SPEED DIRECT DRIVEN MOTOR: 4.8A brushless induction motor can provide 1750 & 3450 RPM speeds for your different needs, 25% more sanding efficiency than belt-driven motor.
  • MAINTAINANCE FREE & EASY ASSEMBLE: Unlike other belt-driven motors that need yearly belt change, the brushless induction motor do not need maintenance, and you only need to install 2 work tables, then the bench belt sander will be ready to work.
  • MADE FOR METALWORKING: From work tables to the machine base, and even the belt frame and dust ports are made of metal, this benchtop belt disc sander is just born for metalworking like knife making and all metal polishing.
  • EASY BELT DISC CHANGE: The easy-remove belt cover and quick belt release system makes belt changes ever fast. Hoop & loop design sanding disc makes disc replacement super easy and does not need to use glue anymore.
  • MULTI-ANGLE SANDING: the work table for sanding disc can be adjusted from 0-45 degrees for your different angles sanding needs.
Check Stock

Hymnorq 3/8 Inch Fractional Size M35 Cobalt Steel Twist Drill Bit Set of 5pcs, Jobber Length and Straight Shank, Extremely Heat Resistant, Perfect Drilling in Stainless Steel and Cast Iron

  • COBALT STEEL - Manufactured from M35 grade cobalt steel, with molybdenum and cobalt added to creates a hardened alloy, measuring Rockwell hardness up to 67, for much faster cutting and extra longer life span, ideal for repeated drilling in metalworking..
  • FOR METALWORKING - Particularly successful in cutting through hard metals(hardness less than HRC38°) such as stainless steel and cast iron, although they can be used for softer materials like copper and aluminium, too. Not for hardened steel / high carbon steel. Try to adjust the RPM when it fails to penetrate..
  • SELF CENTERING - The 135°quick-cut pilot split points are self-centering and can penetrate quickly with less pressure. The bits will not "walk" or "wander". Straight shank allows for firmly holding and accurate centering, fit for standard drill chucks and regular round collet chucks..
  • 5PC SET - The set includes 5pcs of 3/8” diameter M35 grade cobalt steel twist drill bits, packed in a convinient and reuseable PVC case for easy storage and carrying. Manufactured to German DIN338 standard..
  • DOWNLOADABLE USER GUIDE - We've summed up some tips of drilling metals, including a RPM chart for several common metals, based on our reviews and some articles on the internet. In most cases, our customers w....
Check Stock

Hymnorq 1/2 Inch Fractional Size M35 Cobalt Steel Twist Drill Bit Set of 2pcs, Jobber Length and Straight Shank, Extremely Heat Resistant, for Drilling in Stainless Steel and Cast Iron

  • COBALT STEEL – Manufactured from M35 grade cobalt steel, with molybdenum and cobalt added to creates a hardened alloy, measuring Rockwell hardness up to 67, for much faster cutting and extra longer life span, ideal for repeated drilling in metalworking..
  • FOR METALWORKING – Particularly successful in cutting through hard metals(hardness less than HRC38°) such as stainless steel and cast iron, although they can be used for softer materials like copper and aluminium, too. Not for hardened steel / high carbon steel. Try to adjust the RPM when it fails to penetrate..
  • SELF CENTERING – The 135°quick-cut pilot split points are self-centering and can penetrate quickly with less pressure. The bits will not “walk” or “wander”. Straight shank allows for firmly holding and accurate centering, fit for standard drill chucks and regular round collet chucks..
  • 2PC SET – The set includes 2pcs of 1/2” diameter fractional inch size M35 grade cobalt steel twist drill bits. Total lenght: 5.98 inch.
  • working length: 4.49 inch. Manufactured to German DIN338 standard. Packed in a plastic bag and a flat paper box..
  • DOWNLOADABLE USER GUIDE – We’ve summed up some tips of drilling metals, including a RPM chart for several common metals, based on our reviews and....
Check Stock