Best Metal Gear Motors

CenryKay MG90S Servo, Helicopter QC Module 9G Servo Motor Metal Gear Micro Servo Motor Smart Robot Helicopter Plane Boat for Arduino Raspberry Pi Project(6PCS)

Metal gear servo 9g is equivalent to the metal tooth plate of SG90. The installation size is slightly different from that of SG90. The servo system is more comfortable than cheap plastic gears..
Servo can rotate approximately 180 degrees (90 in each direction), and works just like the standard kinds but smaller..
This MG90S Micro Servo has metal gears for added strength and durability.It comes with a 3 horns (arms) and hardware..
The servo motors weight is 13.6g, suitable for 450 electric straight, swash plate steering gear, fixed-wing RC airplane..
The package included 6pcs MG90S Micro Servo, each MG90S come with one motor and three servo arms and three screws..

Check Stock

Adeept AD002 4 Pcs Compatible with MG90S 9G Micro Servo Motor, Metal Geared Micro Servo for RC Robot Car Helicopter Airplane Controls Boat Raspberry Pi Project

【High Quality】100% new, good quality, AD002 Micro servo motor, Compatible with MG90 servo motor..
【Full Metal Gear】 Metal gear with less noise,the metal gears help with the movement,these will rotate the proper direction..
Operating Speed: 0.11 seconds/60 degrees(4.8V).The servo Maximum angle is 180..
【Wide Application】The great micro servo motors for helicopter/ boat / robot car / robot arm /remote controlled aircraft DIY. Fit for electronics DIY, compatible with Arduino, Raspberry Pi..
【Service Guarantee】If you encounter any problems during use, please contact us, we will provide solutions to ensure your experience. We will reply within 24 hours.This AD002 servo motor is compatible with all Adeept robots..

Check Stock

Adeept AD002 2 Pcs Compatible with MG90S 9G Micro Servo Motor, Metal Geared Micro Servo for RC Robot Car Helicopter Airplane Controls Boat Raspberry Pi Project

【High Quality】100% new, good quality, AD002 Micro servo motor, Compatible with MG90 servo motor..
【Full Metal Gear】 Metal gear with less noise,the metal gears help with the movement,these will rotate the proper direction..
Operating Speed: 0.11 seconds/60 degrees(4.8V).The servo Maximum angle is 180..
【Wide Application】The great micro servo motors for helicopter/ boat / robot car / robot arm /remote controlled aircraft DIY. Fit for electronics DIY, compatible with Arduino, Raspberry Pi..
【Service Guarantee】If you encounter any problems during use, please contact us, we will provide solutions to ensure your experience. We will reply within 24 hours.This AD002 servo motor is compatible with all Adeept robots..

Check Stock

2 Pieces MG90S 9g Micro Servo RC Servos for Planes MG90S Digital Servo Aluminum Alloy SG90 Micro Servos Metal Gear for Smart Robot Car Helicopter Plane Boat Vehicle Models

Package includes: the package 2 pieces of mini servo metal gears with model MG90S, which can replace SG90 for better noise suppression and durability.
Detailed size: the servo motor 9g has a size of 22.8 x 12.2 x 28.5 mm/ 0.9 x 0.5 x 1.1 inch, a weight of 13.6g, an operating torque of 2.0KG/ cm, a....
Wiring: dark gray: GND, red: VCC 4.8-7.2V, orange: pulse input, interface type: JR/FUTABA general.
You can give this digital servo motor to your....
Robust structure: the metal micro servo is composed of aluminum metal teeth, coreless motors, and double ball bearings, which is strong, reliable and....
Wide application: the metal gear servo micro can be compatible with 450 E-sky, swashplate steering gear, fixed wing, helicopter KT, flapping wing,....

Check Stock

BNAM Remote Control Excavator Toy 1/14 Scale RC Excavator, 22 Channel Upgrade Full Functional Construction Vehicles Rechargeable RC Truck with Metal Shovel and Lights Sounds Best for Kids 3-15

...control excavator is equipped with a Metal Shovel and upgraded to a Metal Gear!Digging is powerful..
【Full Functional RC Excavator】22 Channel 1:14 Scale remote controll excavator toy is uniquely designed and manufactured professionally.It has Full Function and Powerful Motors of the race level.Of course, restoring the real feeling of the excavation site to make you feel like an engineer..
【6 Independent Motors on Digging Arm】This RC excavator toy can really dig in any direction with 6 independent powerful motors on the digging arm.The digger is made of alloy metal, strong and durable, so it can actually dig out sand, mud and stone.It also has realistic lights and sounds, you can really experience the fun of architecture..
【2.4GHz Accurate Remote Control】Powerful 2.4ghz transmitter with high accuracy and strong anti-interference ability,which can operate at a distance of about 130 feet.The excavator arm can be fully lifted and lowered, moving flexibly and stably.The cab is rotating at 680 degree.The operation mode is the same as the real excavator..

Check Stock

【Element Airsoft Official Store】Motor Gear Pinion Removal Install Tool RC Motor Pinion Gear Tool Motor Pinion Gear Remover Ffor AEG Motors Metal ARMY FORCE-TL002 BK EX121

Element airsoft 's name and element airsoft's quality. The best. Motor gear (pinion gear) tool ● Part number: EX 121. airsoft pinion gear puller.
With this tool, it is possible to attach and detach without burden.Mounting and dismounting are possible.The pinion remover is an essential tool for changing the pinion gear of the electric gun motor..
The motor pinion gear is usually press-fitted and installed, so it is almost impossible to detach it with a tool other than a dedicated tool..
The included small parts are grounded before and after the motor when the pinion gear is press-fitted..
* Please note that compatibility with D-type motors will be reduced！！！！It fits for O-type motors！！！！.

Check Stock

Weber #70887 Replacement Rotisserie Spit Motor with Cord for Weber 2 and 3 Burner Genesis and Spirit Grills

A Truly Commercial Duty Outdoor Grill Rotisserie Motor Unit For Replacement Or Upgrade. Featuring 27 Watts Of Reliable Gear Reduction Power &....
Rust Proof 304 Stainless Steel Weather Resistant Case With Integrated Ventilation Provides For Protection From Minor Weather Interruptions During Use....
Fits Industry Standard 3'' Slide On Style Grill Rotisserie Mounting Brackets (Also Available From OneGrill). Please Also Be Sure That The Rotisserie....
Accepts Industry Standard 5/16" Square Drive Spit Rods. Optimized For Use With all Load Sizes and Balances up to 75lbs..
Please Note Due To The Rugged All Metal Gear train & Internal Cooling Fan This Motor Will Produce Moderately More Continuous Audible Noise Than Motors....

Check Stock

Premier Gear PGW-290 Windshield Wiper Motor Replacement for Ford F800 (80-86), F700 (80-86), F350 (80-86), F250 (80-86), F150 (80-86), F-100 (80-83), Bronco (80-86), Aerostar (86-97)

Premier Gear New Wiper Motors are endurance tested under load to perform in extreme conditions.
OEM Style gaskets are used to provide the proper seal from the elements.
Premier Gear is IOS9001 & TS18949 certified which means all components are inspected & tested.
Brand new complete unit equipped with pulse board, armature, commutator, and electronics as required by application to ensure easy installation.
Premier Gear New Wiper Motors have foam Injected boxes for protection during shipping.

Check Stock

Greenhouse roll up Motor Greenhouse Frame Shed Roll-up Motor Electric Greenhouse Light Roll Up Motor for Greenhouse Roof Ventilation - 1x Roll Up Motors + 1x Creepers (E)

【1x Roll Up Motors + 1x Creepers】The greenhouse roll up motors can be installed on the side of the greenhouse or rolled on the top, The controller makes the operation easier..
【24V 100W Motors】This greenhouse electric film roller has 24v 100w motors, which fit for most of your film ventilation roll up work, electric greenhouse frame shed roll-up motor automatic venting solution..
【Pure Copper Motor】This greenhouse roll up motor uses a pure copper motor and an aluminum alloy body, which is not easy to corrode and rust, and has a long service life..
【High-quality Gear】The gear is the most critical part of the film rolling machine. Our film roll up motor adopts high-quality gears that have undergone special heat treatment, which has high stability and greatly improves operating efficiency..
【Specification】Roll up motor: Power: 100 watt.
【Widely Application】The electric roll-up motor for greenhouse is used extensively in greenhouse such as the solar, vegetable, breeding , flower, connecting film , fruit and other assembled greenhouse for automatic ventilation..

Check Stock