Best Lamp Socket Nuts

Nilight 4-Way Flat to 7-Way Round RV Blade Trailer Adapter Reverse Plug with mounting Bracket, 2 Years Warranty

This adapter converts 4 way flat vehicle end to 7 way blade trailer end, makes tight connection between vehicle socket and trailer plug, no wiggle-room, no loose fittings. Transfers the power from the vehicle to trailer. voltage range: 6-24 Volts.
4-pin flat socket designed to be converted to the 7-pin blade round type socket. Works on most vehicle wiring component like turn signals, brakes,reverse light and auxiliary power..
Heavy duty black plastic construction prevents rusting, enhances appearance. Well sealed spring loaded cover increases protection against dust, moisture and corrosion..
Wide Application: Suitable for most trailers, semitrailers, caravans, RV. Commonly used with T-connectors or tail lamp converters with 4-way flat car end connections.
Package include: 1x Trailer Adapter Plug, 1xMounting bracket 6 screws and 6 nuts..

SAVE YOUR OLD LAMPS: You can use our porcelain lamp socket for your old antique lamps. With these 3-way turn knobs, you can save the old lamps without throwing it to thrash. This lamp socket is unglazed which is a great replacement for your old floor lamps..
BEST MATERIAL: This lamp holder socket is made of porcelain material which is the most durable and long-lasting shell. This Porcelain socket is best recommended by experts because it is highly heat and weather resistant than other materials..
REMOVABLE TURN KNOB: This replacement floor lamp socket has a removable knob that can be used as an on/off key on the side. This knob can be typically attached to the same size shaft and can be changed or extended that gives an impressive change to the appearance of the socket..
CERTIFIED PRODUCT: This 3-way porcelain lamp socket is designed as per the industry standards and certified by CUL-listed.The lamp socket can withstand high voltage of the bulbs up to 750watt or 250V that gives effective brightness..
WIDE USAGE: The mogul base lamp is widely used in the residential light sockets and it is used exclusively for reflector style floor lamps. The white finish of the socket gives a classic look to the lamp, which can be used in various decorations..

Flush Mount Pre-Wired Fixture Holder, U.L. listed..
4 inch shade fitter, 5 inch diameter on ceiling side.
Comes with crossbar, wire nuts, thumb screws, and high head porcelain socket.
Excellent canopy for hallways, closets, bathrooms, utility rooms, garages and more!.

Excellent canopy for hallways, closets, bathrooms, utility rooms, garages and more!.
Comes with crossbar, wire nuts, thumb screws, and high head porcelain socket.
4 inch shade fitter, 5 inch diameter on ceiling side.
Flush Mount Pre-Wired Fixture Holder, U.L. listed..

Repair or Replace – Use the Power Gear Lamp Socket with Push ON/OFF to fix or create a new lamp or light fixture.
DIY Project – This lamp socket is perfect with a DIY desk or floor lamp to create a one-of-a-kind fixture for your home or office.
Push Switch – This lamp socket can toggle on and off with the push switch attached to the socket.
Design – The socket has a brushed gold finish that is perfect for the office or home décor.
Power – This lamp socket has an electrical rating of 250VAC and 660W, is UL Listed and can only be used with copper wire.

Package includes - 1 x 8 9 10 inch adjustable lamp harp, 1 x clear crystal lamp finial, 1 x 8 feet lamp cord, 1 x 3-way lamp socket, 1 x lamp harp base, 1 x decorative neck, 1 x 5 cm threaded pipe, 1 x 2.5 cm threaded pipe, 2 x metallic washers, 2 x rubber washers, 2 x lock washers, 2 x hex nuts..
Adjustable and Works with Any lamp Style Harp. Not sure what size harp you need? Adjust the harp to the right size to get just the right look. Not to mention if you want to replace your shade again you wont need a new harp just another adjustment!.
Bubbles crystal lamp finial add a decorative flair to the top of a lamp, hold a lampshade in place and make your lamps look elegant. Lamp finial made of premium crystal, which is brighter and flashes when the light..
8 feet UL listed - Electrical components are polarized and UL-listed, meaning you can rewire or repurpose old vintage or thrift store lamps to make them safer than they were before..
Great for DIY projects and for repair and replacement of broken, tarnished or lamp parts. [NOTE]: If there is any part of damage attachment, please contact us to get free replacement..

You will get: the package includes 2 pieces of table lamp wiring kit, each kit has a 8-pin lamp cord, a 3-way matching socket, a pacifier, a washer and 2 hex nuts to better repair broken lamps.
The complete combination helps you to repair the lamp faster without tool lack trouble.
Proper size: this lamp repair kit contains a 5/8 inch 1/8 IP steel running threaded joint, with outer diameter of 3/8 inch, and with rust-proof yellow zinc plate, suitable size for easy use.
Please check the size before purchasing in case of unfit situation.
Durable material: the make-a-lamp kit is made of quality galvanized steel, not easy to rust or break, durable to use for a long time.
The lamp kit is reusable after being taken off, saving your cost and time for replacing other kits often.
DIY lamp kit: the lamp light kit is suitable for DIY projects at home or in the shop.
Use your creativity and hands-on ability, you may apply this DIY lamp wiring parts kit to repair and replace the broken and aging lamp, as well as the damaged accessories out of luster effortlessly.
Easy to install: the instruction is included for reference, so you can use your own lamp holder to DIY a favorite lamp in a few minutes, or apply this lamp kit to connect the aged lamps again.

COMPACT, PORTABLE DESIGN - The PowerDyne Y3 Skate Tool has a design that allows for versatile functionality, while still fitting in your pocket..
ERGONOMIC, NO-SLIP GRIP - This skate tool has an ergonomic design that provides great grip and torque for any project..
1/2" SOCKET FOR AXLE NUTS - This all-in-one skate wrench has a 1/2" socket that is perfect for adjusting standard axle nuts..
9/16" SOCKET FOR KINGPIN NUTS - The PowerDyne multi-functional tool also features a 9/16" socket for kingpin lock nuts on roller skates..
DURABLE FOR LONG USE - The stoppers will give you long-lasting and quality use. You will be able to see a safety line that indicates replacement. This....

Repair or Replace – Use the GE 3-Way Lamp Socket to fix or create a new lamp or light fixture.
DIY Project – This lamp socket is perfect with a DIY desk or floor lamp to create a one-of-a-kind fixture for your home or office.
Lighting Settings – This lamp socket can toggle through low, medium or high lighting intensity with the turn of the switch.
Design – The socket has a black finish that is perfect for the office or home décor.
Power – This lamp socket has an electrical rating of 250VAC and 250W, is UL Listed and can only be used with #18 stranded copper wire.