Best Hydraulic Bender

Antstone Tubing Bender Kit with Reverse Bend 1/4"-7/8" HVAC Ratchet Copper Pipe Bender Tool Set 90° Bend with 7 Dies for Refrigerator Air Conditioner Repair

  • [Parameters] - Applicable pipe outer diameter: Φ1/4'', 5/16'', 3/8'', 1/2'', 5/8'', 3/4'', 7/8''.
  • applicable pipes: for soft copper / brass pipes only..
  • [High Efficiency] - This pipe bender can be operated with one hand. You can save time and effort and improve work efficiency..
  • [Forward & Reverse Bending] - The pipe bender can be bent in both forward and reverse directions to meet the needs of your different workplaces..
  • [Compact & Portable] - This hvac tool kit has a compact design, making it easy to work in tight spaces, which includes: pipe bender body*1, deburring knife*1, bending groove*2, dies*7, thicken toolbox*1..
  • [Wide Application] - This tubing bender is widely used for HVAC, refrigerators, automobiles, hydraulic and pneumatic systems maintenance, etc..
Check Stock

VEVOR Hydraulic Rebar Bender, 1700W, Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • ...his rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
  • 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy to break. Moreover, it can s....
Check Stock

VEVOR Hydraulic Rebar Bender 1700 Wattage Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • ...his rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
  • 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy to break. Moreover, it can s....
Check Stock

KAKA Industrial Heavy-Duty Hydraulic Roll Cage Tube Bender, Solid Construction and High Precision Metal Tube Bender (HB-10)

  • More space can be saved through removing the leg and hand pump.
  • at the same time, it is easily to storage if you have limited space.
  • The hydraulic pipe bender is build with heavy material that can last for many year demanding use.
  • The bending capacity can up to 10 ton that will satisfy most of the projects. It is a great tool for any pipe bending work shops.
  • Six standard dies are included in a way to increase the flexibility of bending.
  • the size of those dies are 1/2" , 3/4" , 1", 1-1/4", 1-1/2" and 2" respectively.
  • The HB-10 pipe bender has been designed for years of trouble free use under the most demanding conditions and it would be a money saver from long term perspective.
Check Stock

Antstone 1/4” 3/8” 1/2” O.D. Tubing Bender 3 in 1 Tube Bender 180° HVAC Copper Aluminum Tubes Bending Tool for Air Conditioning Refrigeration Repair

  • [Parameters] - Application: only for soft copper / aluminum tubes.
  • applicable tube outer diameter: 1/4"、3/8"、1/2".
  • applicable wall thickness: 0.027”-0.059”(0.7mm-1.5mm).
  • bending radius: 0.82”, 1.14”, 1.43”(21mm, 29mm, 36.5mm).
  • [3-in-1 Design] - The tube bender is a 3 in 1 tool and will fit 1/4", 3/8", 1/2" outside diameter tubes..
  • [High Quality] - High-quality alloy aluminum body, which is lightweight and durable. (NOTE: if the tube wall thickness < 0.059”, it may be damaged.).
  • [Professional Design] - (1)Aluminum alloy material makes it light and portable.(2)The soft rubber handle provides a comfortable grip..
  • [Wide Application] - This tubing bender is widely used for HVAC, refrigerators, automobiles, hydraulic and pneumatic systems maintenance, etc..
Check Stock

Tubing Bender Pipe Bender Hvac tools - Tube Bender Kit with Reverse Bending 1/4 to 7/8 Inch Used in Hydraulic Systems Automobile and Refrigerator maintenance Hvac work

  • Satisfactory Service: We provides THREE-YEAR FACTORY WARRANTY. Suitable Tube Size: 1/4“, 5/16“, 3/8“, 1/2”, 5/8“, 3/4“, 7/8”, the....
  • Made of 40CR steel and 45# steel. Suitable for bending annealed metal materials or PVC pipes, such as thin-walled steel pipes (thickness.
  • With pipe cutter, suitable for cutting heavy and hard materials, such as thin stainless steel (thickness.
  • Application: automobile maintenance, refrigerator maintenance, Hvac work, hydraulic system, etc..
  • Package Include: Tubing Bender x 1, Fixed Supports x 2, Tube Bender Heads x 7, Reverse Bending Tool x 1, Pipe Cutter x 1, Deburring Tool x 1, Carrying....
Check Stock

VEVOR Hydraulic Rebar Bender, 3000W, Electric Rebar Bender, 1-1/4'' / 32 mm #10 Grade 60 Max Rebar Diameter, Rebar Steel Bender Machine, Bending Machine For Bending Rebar, Steel Bar, Steel

  • ...bender machine adopts a sturdy iron machine body and durable Idler Wheel. φ78 / 109 Fixed Idler Wheel and φ99 / 148 Gyre Idler Wheel are stronger and not easy to break. Moreover, it can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste..
  • Easy to Operate & Transport: This hydraulic rebar bender comes with the standard foot pedal control switch for your easy hands-free bending. With four handles on the corner for you to transport and operate effortlessly. It is widely used in construction engineering for bending rebar, steel bar, steel rod, screw thread steel, carbon steel, round steel, etc..
Check Stock

VEVOR Hydraulic Rebar Bender, 3000 Wattage Electric Rebar Bender, 1-1/4'' / 32 mm #10 Grade 60 Max Rebar Diameter, Rebar Steel Bender Machine, Bending Machine for Bending Rebar, Steel Bar, Steel Rod

  • ...bender machine adopts a sturdy iron machine body and durable Idler Wheel. φ78 / 109 Fixed Idler Wheel and φ99 / 148 Gyre Idler Wheel are stronger and not easy to break. Moreover, it can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste..
  • Easy to Operate & Transport: This hydraulic rebar bender comes with the standard foot pedal control switch for your easy hands-free bending. With four handles on the corner for you to transport and operate effortlessly. It is widely used in construction engineering for bending rebar, steel bar, steel rod, screw thread steel, carbon steel, round steel, etc..
Check Stock

ABB OT40FT3 Disconnect, 40 Amp, 3-Pole Non-Fused Disconnect Switch. 40 Amp

  • Hydraulic copper bender can see bending angle.
Check Stock