Best Hvac System Drain Line Fittings

BPV31 Piercing Valve for Bullet with R134a Refrigerant Charging Hose,Refrigerant Can Tap with Gauge, R134a can to R-12/R-22 port

  • BPV31 Piercing Valve for Bullet with R134a recharge hose with Gauge.Make sure to select the proper adapters for the tube od (3 options with kit)..
  • R134a recharge hose with gauge: 19" hose with R-134a can tap vlve to R-12/R-22 service port connection,1/4" end fits R12, 22, 502 fittings.This is simple to add 134a refrigerant to a sealed system when there is no suction line port..
  • BPV31 Piercing Valve compatible with Bullet: replaces for HVAC System: 3-In-1 Line Tap Piercing Valve for Bullet.
  • 3-In-1 Line Tap Piercing Valve fits 3 sizes of tubing: 1/4", 5/16" and 3/8". The valve is not created or sold by Bullet..
  • The hose is made of corrosion-resistant brass, won't wear out or rust over time. Our new BPV31 valve with rubber gasket to prevent leaking. Our replacement hose kit has been well-tested by the manufacturer..
  • Inexpensive and easy repair to bring your refrigerator back to new performance. With the system running and low on refrigerant the gauge should be in vacuum indicating a low charge. If this is the case open the valve on the can end of charging hose and begin adding 134a..
Check Stock

BPV31 Piercing Valve Compatible with Bullet with R134a Charging Hose Refrigerant Can Tap with Gauge R134a can to R-12/R-22 port

  • PACKAGE INCLUDE: R134a charging hose (with Gauge ) + BPV31 Piercing Valve for Bullet..
  • R134a Charging Kit: 19" hose with R-134a Can to R-12/R-22 service port connection,1/4" end fits R12, 22, 502 fittings.And the gauge has scale readings....
  • BPV31 Piercing Valve for HVAC System: 3-In-1 Line Tap Piercing Valve for Bullet.
  • 3-In-1 Line Tap Piercing Valve fits 3 sizes of tubing: 1/4", 5/16"....
  • PREMIUM QUALITY: The replacement part is made from durable high quality material and well-tested by the manufacturer..
  • The product is not sponsored or endorsed by Bullet.
Check Stock

Diversitech 6-2626L Drain Pan Plastic 26 x 26 Large

  • LARGE HVAC DRAIN PAIN: Keeps your HVAC systems mess-free to protect building components and keep your space clean.
  • NON-TOXIC MATERIALS: Vacuum-formed from non-toxic ABS plastic for worry-free use with air conditioner and humidifier systems.
  • DURABLE DESIGN: Rolled edges, ribbed bottom, and reinforced corners add extra strength to stand up to everyday use.
  • PREVENTS SPILLS: Contains a depth of 2 inches (50.8mm) of water, and comes equipped with a 3/4-inch diameter PVC discharge fitting.
  • SIZED FOR YOUR SYSTEM: Measures 26" x 26" to fit a wide range of HVAC systems and components.
Check Stock

Uniweld 40002 Nitrogen Sludge Sucker and Blaster Kit with Metal Carrying Stand for 40 Cubic Feet Nitrogen Tank

  • The Nitrogen Sludge Sucker and Blaster Kits are specifically designed for multiple uses in the HVAC/R industry ((Tank Not Included – Sold....
  • Nitrogen Regulator with protective rubber gauge boots - Maximum Delivery Pressure up to 175 PSI.
  • Purging copper lines with low pressure nitrogen displaces the oxygen, preventing oxidation and the resulting scale.
  • Pressure testing a system for leaks prior to evacuating and charging will save time and money.
  • Cleaning a condensate drain line is easy with a Sludge Sucker or Sludge Blaster.
Check Stock

JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-100PSI, Universal for Auto Truck SUV Motorcycle ATV RV

  • ...gh pressure injection pump or high pressure fuel track on direct-injection engine, due to the fuel gauge's low pressure range. Test fuel pressure is an essential part of the troubleshooting process of fuel injection system..
  • 3 CONNECTION TYPES FOR TU-113 FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 14"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 11"L hose for the small Schrader valve (for some Ford), and 8"L hose for M6 fuel pressure test port. 1/4" barbed brass fittings is direct for special test outlet on engine, and aluminum tee splices in-line between the fuel pump and engine for most vehicles..
  • PRIMARY FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 2-3/4" large dial with 0-100psi/0-7bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. Please note, there is no pressure relief valve and drain hose, please wrap cloth around hose connection before relieving pressure from fuel line and removing testing components..
  • CHECK FUEL INJECTOR PUMP PRESSURE: The pressure gauge is designed for checking the fuel....
Check Stock

Fuel Line Kit 3/8\ 6AN 20FT Fuel Hose Nylon Stainless Braided CPE Oil Fuel Injection Line Fitting Kit Universal

  • 20Ft Fuel Injection line with 6AN fittings: The package includes 10pcs 6an swivel hose ends (4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree) and 3/8 braided fuel line. All the an fittings feature a reusable spin-lock connector.
  • Universal Application: The AN6 nylon braided fuel hose can be worked with coolant, diesel, oil, hydraulic fluid, pump gas, air, and fuel. This braided fuel line mostly used in brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, transmission system and oil cooler kit, etc. Easily enough line here to run all the way from your fuel tank to the engine.
  • Excellent Flexibility and Durability: The Black Braided Steel Fuel Hose made of Nylon and Stainless Steel Braided + CPE Synthetic Rubber.
  • The hose end AN fittings is made of high strength T6061 Aluminum, polished and anodized surface provide the bright appearance, corrosion protection and strong strength.
  • Safety Features: The 6an push lock hose working temperature range: -40℉ to 350℉ (-40℃ to 176℃). Maximum Working Pressure (psi): 500 psi. Bursting Pressure(psi): 2000psi. Braided gas line Inner diameter: 0.34 inch, outside diameter: 0.56inch. Please measure before purchase.
  • No Worry To Buy: Excellently Sealed, no leaking. We of....
Check Stock

Goplus 1/3HP 4CFM Single Stage Rotary Vane Vacuum Pump and R134a Manifold Gauge Set, HVAC A/C Refrigeration Kit, Including Vacuum Pump, A Bottle of Vacuum Pump Oil, Suitable for R12, R22, R134

  • .... It’s ideal for R12, R22, R134, and could be suitable for R410a after configuring the adapters. It does not include the adapter, but you can easily buy it locally or on Amazon..
  • 【Three-Color Coded Hoses】There are yellow, blue, and red hoses, each equipped with brass fittings. The fittings are 45 degrees on one hand and straight on the other, providing a leak-proof seal. The three hoses are 36" in length. All hoses comply with the SAE-J2196 standard. The working pressure of the hoses is 800PSI - 4000PSI and its acceptable refrigerant are CFC, HCFC, and HFC..
  • 【A Complete Refrigerant Tool Kit】This tool kit is a complete set for Mini-split/ HVAC and AUTO AC refrigerant recharging, including a vacuum pump, a pressure gauge set, 3 multicolored hoses with length of 36", 2 adjustable quick couplers, 2 adapters, a bottle of vacuum pump oil, a manual for pump and gauge and a portable suitcase..
  • 【Pump Oil and Portable Case】The vacuum pump features a simple oil fill port for a clean pour and oil drain plug positioned beneath the oil reservoir. The spillage meter will help to ensure the proper level of oil. Ther....
Check Stock

Diversitech GG-1 Drain Gun for A/C Condensate Lines, Charcoal Grey

  • LIGHTWEIGHT AND PORTABLE TOOL: This Drain Gun weighs in at 3 oz. and is designed to blow out condensate drain lines instantly. No need for carrying heavy air or nitrogen tanks..
  • AIR POWER: This air blower blaster is ready for use after insertion of a Swoosh CO2 cartridge. With the press of the trigger, the gun releases 800 psi (max working pressure 1200 psi) of oil free food grade air..
  • TAPERED AND FLEXIBLE FITTING: Each unit comes with a fitting to work on 3/8" - 3/4" drain openings. Its flexibility allows you to maneuver through cabinets, coils, and those hard to reach drains..
  • The drain gun uses carbon dioxide and is completely safe for use in the environment. It is the perfect solution to choose instead of the environmentally unfriendly practice of using refrigerant to clean the drain line..
  • EASY TO USE: With clear instructions, reduced labor costs, and time saved, this A/C cleaning tool will become any HVAC technician's new best friend..
Check Stock

NewPosition 4CFM 1/3HP Air Vacuum Pump HVAC A/C Refrigeration Tool Kit AC,Auto Repair Equipment,Manifold Gauge Set(R134A R22),3 Hoses

  • ✅【Simple But Professional】New Position Powerful HVAC refrigeration kit,4CFM、1/3 HP、single-stage rotary air vacuum pump,low noise with internal high volume cooling fan for extended use..
  • ✅【Heavy Duty Vacuum Pump】Stable copper motor enables stable operation,die-cast aluminum alloy casing keep lightweight and durable,Equipped with brass fitting tethered safety caps to prevent oil leaks during transportation and handling..
  • ✅【HVAC Gauge Reading】The New Position HVAC service gauge set is great for diagnosing and repairing AC systems. Ideal use for R12, R22, R134a..
  • ✅【Easy Oil Change】The vacuum pump features a simple Oil Fill Port for a clean pour and Oil Drain Plug positioned beneath the oil reservoir to quickly drain when needed. Checking the oil sight glass will help to ensure the proper level of oil..
  • ✅【What You Get】Multicolored set of three hoses, Manifold Gauge Set measures the pressure of refrigeration system at different stages,Storage Bag to keep equipment clean and dust free..
Check Stock