Best Hdpe Wind Pipe

FAMCO Wind Directional Chimney Cap

MADE IN THE USA: Our quality wind chimney caps are constructed from heavy-duty 26 gauge Galvanized Steel..
ADAPTIVE CHIMNEY WIND DEFLECTOR: An effective solution to chimney downdraft in windy climates. Air movement past the hood creates a partial vacuum in the flue, enhancing draft efficiency to prevent downdrafts. Increases the efficiency of a stove or fireplace..
FUNCTIONAL WIND RESISTANCE: Cap separates the wind stream as it flows over the cap, while the rotating hood is kept in secure proper position (relative to wind) by the wind vane. Used for chimney exhaust or building ventilation.
SELECTION: Our chimney wind cap for home works for single wall pipe sizes from 5 inch to 10 inch. Diameter references OUTSIDE DIAMETER of pipe. Width of actual chimney cap ranges from 11 inches to 18 inches. Heights range from 14.5 inches to 20 inches..
SATISFACTION: FAMCO prides itself on Quality Built Products manufactured from quality raw materials. All products are guaranteed to be free of defective material or workmanship for a period of one year from the date of delivery. During the guarantee period, if any parts prove defective, they will be replaced free of charge..

Check Stock

Disconnect Tongs Tool with Depth Gauge and Pipe Deburring Tool Combination Set for Push to Connect Fittings Removal Tool for Disconnect Clamp for 1/2",3/4",1" Plastic PEX CPVC Copper Pipe Fittings

【Package Includes】1 pcs disconnect tongs tool.
1 pcs deburr &gauge tool .the disconnect tongs have 3 size teeth available, can easily remove the push fit fitting from pex, cpvc or copper pipe of 1/2 inch, 3/4 inch or 1 inch.it can deburr the cut end of the pipe & bevel the cut edge, ensure complete seal and smooth connection..
【Quality Material】the push to connect fittings removal tool is made of 40cr steel and tpr coated grips prevent slippage in wet conditions and one-handed operation for in-tight situations.good grips, hefty build to allow your free hand the ability to assist in the removal of fittings..
【Deburr and Gauge Tool】 deburring tool is made of lightweight and durable pvc.ideal for marking pipe depth and deburring..deburring tool is compatible with 1/4 to 1 inch sized pex, copper, cpvc, pe-rt and sdr-9 hdpe pipe.
【Fast Disconnection】 simply align the tool with pipe and fitting and squeeze to remove push-to-connect fittings effortless and quickly. deburring pipe and depth gauge tool, easy measure insertion depth and deburring pipe after pipe is inserted..

Check Stock

SharkBite 3/4-Inch Tee, Push-to-Connect, PEX, Copper, CPVC

INSTALLS IN SECONDS: 3/4-inch tee pipe connector requires no soldering, crimping, or glue–just push to create a watertight seal.
VERSATILE: Fits PEX, copper, CPVC, HDPE, PE-RT, and CTS pipe and connects them in any combination.
COMPATABILITY: Same as part numbers U370LFZ and U370LF.
QUALITY: SharkBite quality and performance is field-proven with more than 550 million connections.
SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection.
CERTIFIED: SharkBite fittings are certified to 200 PSI and 200 degrees Fahrenheit and can be reused up to 4 times.

Check Stock

Restcozi Adirondack Chairs, HDPE All-Weather Adirondack Chair, Fire Pit Chairs (Traditional, Black)

【All Weather & Classic Design 】❄ Made of durable, rust-proof all-weather HDPE material, it's waterproof and heat resistant, so you can keep it outdoor in all kinds of weather including hot sun, heavy snow, torrential rain, salt spray, and strong coastal winds. HDPE is also a sturdy material, and this Adirondack chair can hold up to 350 pounds..
【Wide and Comfortable Seat】❄ Large seats, high backrests, and wide armrests make this fire pit chair a seating solution that builds rest, relaxation, and rejuvenation, which is perfect for the lawn, garden or patio..
【 Different Form HDPE Materials】❄ Will not fade, chip, crack, peel or rot, UV protection, Able to withstand various environmental pressures, including sun, snow and strong wind. This material perfectly improves the shortcomings of solid wood..
【 Easy Assembly 】❄ Clear instructions and an error of less than 0.017 inches make assembly very easy (according to the instructions, assembly can be completed in 15 minutes, including installation tools).
【Easy to Clean and Maintain】❄ Unlike regular s....

Check Stock

Restcozi Adirondack Chairs, HDPE All-Weather Adirondack Chair, Fire Pit Chairs (Traditional, Teak)

【All Weather & Classic Design 】❄ Made of durable, rust-proof all-weather HDPE material, it's waterproof and heat resistant, so you can keep it outdoor in all kinds of weather including hot sun, heavy snow, torrential rain, salt spray, and strong coastal winds. HDPE is also a sturdy material, and this Adirondack chair can hold up to 350 pounds..
【Wide and Comfortable Seat】❄ Large seats, high backrests, and wide armrests make this fire pit chair a seating solution that builds rest, relaxation, and rejuvenation, which is perfect for the lawn, garden or patio..
【 Different Form HDPE Materials】❄ Will not fade, chip, crack, peel or rot, UV protection, Able to withstand various environmental pressures, including sun, snow and strong wind. This material perfectly improves the shortcomings of solid wood..
【 Easy Assembly 】❄ Clear instructions and an error of less than 0.017 inches make assembly very easy (according to the instructions, assembly can be completed in 15 minutes, including installation tools).
【Easy to Clean and Maintain】❄ Unlike regular s....

Check Stock

KINGYES Adirondack Side Table, Outdoor Rectangular End Table, Gray

【PERFECT COMPANION】KINGYES Adirondack side tables made with HDPE, will never fade, splinter, crack, chip, peel, or rot when exposed to the elements. It is the perfect addition to outdoor Adirondack chair, dining and rocking chairs..
【WEATHER RESISTANT & FADE-PROOF】This KINGYES side table is made with fade-resistant HDPE: a kind recycled material with its timeless style, which can withstand a range of severe weather conditions like burning sun, strong wind or heavy rain yet retain the original color for years to come..
【PRODUCT DIMENSION】16.5" x 15.7" x 12.9.

Check Stock

KINGYES Adirondakc Side Table, Rectangular End Table-Orange

【PERFECT COMPANION】KINGYES Adirondack side tables made with HDPE, will never fade, splinter, crack, chip, peel, or rot when exposed to the elements. It is the perfect addition to outdoor Adirondack chair, dining and rocking chairs..
【WEATHER RESISTANT & FADE-PROOF】This KINGYES side table is made with fade-resistant HDPE: a kind recycled material with its timeless style, which can withstand a range of severe weather conditions like burning sun, strong wind or heavy rain yet retain the original color for years to come..
【PRODUCT DIMENSION】16.5" x 15.7" x 12.9.

Check Stock

KINGYES Adirondack Side Table, End Table for Adirondack Chair, Navy

【PERFECT COMPANION】KINGYES Adirondack side tables made with HDPE, will never fade, splinter, crack, chip, peel, or rot when exposed to the elements. It is the perfect addition to outdoor Adirondack chair, dining and rocking chairs..
【WEATHER RESISTANT & FADE-PROOF】This KINGYES side table is made with fade-resistant HDPE: a kind recycled material with its timeless style, which can withstand a range of severe weather conditions like burning sun, strong wind or heavy rain yet retain the original color for years to come..
【PRODUCT DIMENSION】16.5" x 15.7" x 12.9.

Check Stock

SharkBite 1/2-Inch Tee, 1/2 Inch, Push-to-Connect, PEX, Copper, CPVC

INSTALLS IN SECONDS: 1/2-inch tee pipe connector requires no soldering, crimping, or glue–just push to create a watertight seal.
VERSATILE: Fits PEX, copper, CPVC, HDPE, PE-RT, and CTS pipe and connects them in any combination.
COMPATABILITY: Same as part numbers U362LFZ and U362LF.
QUALITY: SharkBite quality and performance is field-proven with more than 550 million connections.
SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection.
CERTIFIED: SharkBite fittings are certified to 200 PSI and 200 degrees Fahrenheit and can be reused up to 4 times.

Check Stock