Best Hdpe Pipe Extrusion Line

Disconnect Tongs Tool with Depth Gauge and Pipe Deburring Tool Combination Set for Push to Connect Fittings Removal Tool for Disconnect Clamp for 1/2",3/4",1" Plastic PEX CPVC Copper Pipe Fittings

  • 【Package Includes】1 pcs disconnect tongs tool.
  • 1 pcs deburr &gauge tool .the disconnect tongs have 3 size teeth available, can easily remove the push fit fitting from pex, cpvc or copper pipe of 1/2 inch, 3/4 inch or 1 inch.it can deburr the cut end of the pipe & bevel the cut edge, ensure complete seal and smooth connection..
  • 【Quality Material】the push to connect fittings removal tool is made of 40cr steel and tpr coated grips prevent slippage in wet conditions and one-handed operation for in-tight situations.good grips, hefty build to allow your free hand the ability to assist in the removal of fittings..
  • 【Deburr and Gauge Tool】 deburring tool is made of lightweight and durable pvc.ideal for marking pipe depth and deburring..deburring tool is compatible with 1/4 to 1 inch sized pex, copper, cpvc, pe-rt and sdr-9 hdpe pipe.
  • 【Fast Disconnection】 simply align the tool with pipe and fitting and squeeze to remove push-to-connect fittings effortless and quickly. deburring pipe and depth gauge tool, easy measure insertion depth and deburring pipe after pipe is inserted..
Check Stock

Stihl 0000 930 4300 CF3 Pro Trimmer Line

  • The CF3 Pro Trimmer Line is formed using 3-component, tri-extrusion technology..
  • The CF3 Pro Trimmer Line is compatible with all STIHL nylon line trimmer heads, making the CF3 Pro at home on any landscape trailer or in any garage..
  • Its high-quality polyamide components ensure strong durability with excellent cutting performance..
Check Stock

LFS Sport Netting #42 HDPE Batting Cage Net - 12' x 12' x 70'

  • Exceptional quality baseball or softball batting cage nets for use in all environments, indoors or out, nets will give you years of enjoyment..
  • #42 HDPE knotted netting with 218 LB. break strength..
  • Made with twisted knotted #42 HDPE netting for maximum UV and abrasion resistance..
  • A 3/8” HDPE over lock stitched border rope on all edges, and center roof support line, with convenient 6’ rope tails on each end for easier suspending..
  • All cages have a 4 ft. overlapping entry door with rope borders on one end for easy entry..
Check Stock

SharkBite 3/4-Inch Tee, Push-to-Connect, PEX, Copper, CPVC

  • INSTALLS IN SECONDS: 3/4-inch tee pipe connector requires no soldering, crimping, or glue–just push to create a watertight seal.
  • VERSATILE: Fits PEX, copper, CPVC, HDPE, PE-RT, and CTS pipe and connects them in any combination.
  • COMPATABILITY: Same as part numbers U370LFZ and U370LF.
  • QUALITY: SharkBite quality and performance is field-proven with more than 550 million connections.
  • SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection.
  • CERTIFIED: SharkBite fittings are certified to 200 PSI and 200 degrees Fahrenheit and can be reused up to 4 times.
Check Stock

MECCANIXITY Petrol Fuel Line Hose 3/16\ x 5/16\ 3.3ft Blue for Chainsaws Lawn Mower String Trimmer Blowers Small Engines

  • Petrol fuel line hose is a very common and useful accessory used in various engines at home and in the garden. Fuel line is used for small engines for chainsaws, string trimmers, blowers, lawnmowers, etc..
  • Fuel line hose, is in size of : 3.3ft long, 3/16-inch x 5/16-inch(5mm x 8mm)(ID. x OD.), 1/16-inch(1.5mm) wall thickness.
  • The fuel pipe has strong oil resistance and wear resistance, smooth surface, easy installation, and can work normally in low temperature environment. It is a good replacement for the fuel pipe on the engine.
  • Steps of installation: 1.Prepare a fuel line hose.
  • Please select the fuel pipe of appropriate size, especially the inner diameter and outer diameter of the pipe.
Check Stock

MECCANIXITY Petrol Fuel Line Hose 3/16\ x 3/8\ 3.3ft Yellow for Chainsaws Lawn Mower String Trimmer Blowers Small Engines

  • Petrol fuel line hose is a very common and useful accessory used in various engines at home and in the garden. Fuel line is used for small engines for chainsaws, string trimmers, blowers, lawnmowers, etc..
  • Fuel line hose, is in size of : 3.3ft long, 3/16-inch x 3/8-inch(4.5mm x 9.3mm)(ID. x OD.), 3/32-inch(2.4mm) wall thickness.
  • The fuel pipe has strong oil resistance and wear resistance, smooth surface, easy installation, and can work normally in low temperature environment. It is a good replacement for the fuel pipe on the engine.
  • Steps of installation: 1.Prepare a fuel line hose.
  • Please select the fuel pipe of appropriate size, especially the inner diameter and outer diameter of the pipe.
Check Stock

SENRISE 100 X Transparent Shrink Wrap Film Bag Heat Seal Gift Packing for Homemade DIY Project Packaging Candle Jar Bath Bomb Gift 2235CM

  • EXTRUSION SYSTEM: Gradient mixing type with high-speed energy saving design, extrusion blow moulding machine gradually changed screw with same distance and different deep. Material of screw: High quality nitriding steel 38CrMoAlA,with nitriding surface HV≥800,brittleness≤2. Material of barrel: High quality nitriding steel 38CrMoAlA,with nitriding surface HV≥900,brittleness≤2..
  • DIE HEAD: Head mode of plastic toy extrustion blow molding machine, the continuous extrusion head is designed with material center coming-in type and removing the plastic melting line on the product surface, easily for material or color change, saving the time & material cost with speedy operation..
  • HYDRAULIC SYSTEM: The main hydraulic system of fully automatic precision plastic injection blow moulding machine is mainly composed of motor, pump, pressure regulating valve block, reversing valve blocks, cylinders and oil chillers. It controls platens open & close, carriage up & down, extrusion system up & down, blow pin actions, or even spinning cut and so on..
  • ELECTRICAL CONTROL: The electrical control system of plastic small bottles blowing machine is composed of operation panel, temperature control module, PLC, input & output module, proportion board, contactors, voltage s....
Check Stock

0000-930-2340 Trimmer Line .095" (280') Orange 1 Lb Roll

  • An extremely robust, long-lasting trimmer line designed for some of the toughest trimming applications..
  • This rugged line is formed using 3-component, tri-extrusion technology..
  • Its high-quality polyamide components ensure strong durability with excellent cutting performance.
Check Stock

SharkBite 1/2-Inch Tee, 1/2 Inch, Push-to-Connect, PEX, Copper, CPVC

  • INSTALLS IN SECONDS: 1/2-inch tee pipe connector requires no soldering, crimping, or glue–just push to create a watertight seal.
  • VERSATILE: Fits PEX, copper, CPVC, HDPE, PE-RT, and CTS pipe and connects them in any combination.
  • COMPATABILITY: Same as part numbers U362LFZ and U362LF.
  • QUALITY: SharkBite quality and performance is field-proven with more than 550 million connections.
  • SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection.
  • CERTIFIED: SharkBite fittings are certified to 200 PSI and 200 degrees Fahrenheit and can be reused up to 4 times.
Check Stock