Best Gas Supply Pipe

HZR Copper Ball Valve Internal Water Pipe Equipment Accessory

Hand tightening provides reducing the risk of leakage and self-locking type design, more convenient for you to use..
Brass for corrosion resistance, ductility at high temperatures, and low permeability and valve requires no special tools ..
Working medium: natural gas, liquefied petroleum gas, and each valve individually tested for maximum safety..
It was widely used in irrigation systems, pipeline systems, oil and gas supply systems with different size and colours..
Copper ball valve thick brass inner wire for tap water switch, water valve and water pipe valve..

Gas Type- 2 Positions, LPG 10" W. C & NG 4" W. C, Max inlet pressure PSI: 1/2 (3.5KPa), Gas Flow: 120,000BTU/ Hr. Adjustable outlet pressure 4" &10" Water Column..
Fitting- in 1/2" x out 1/2" NPT Pipe threads. When apply to LP gas, it needs to work with an external regulator (NOT supplied). Install the external regulator between the propane supply source and Maxitrol regulator..
Safety - Our Pressure Regulators Pass CSA certificate for your safety. no gas leaks, ensures safety while using grill, air flow is kept stable and at appropriate levels..
Applications- Stable Gas flow, for Natural LP Gas grills, heater, oven, Gas Welding Equipment, NG gas pressure regulator.
Please take the Hex Screw out to check it's the correct side for your application. LP side and NG side is different. Do not install the regulator too close to the heating equipment or use in very cold environment. Heat or cold can change the resistance of the spring inside the regulator..

Function: Designed for finely controlled air and gas mixtures. Perfect for heating, sterilization and combustion..
Compatiable Gas: For liquefied petroleum gas (LPG) or butane gas. The burner is equipped with a serrated inlet arm that accepts 6-8 mm pipe..
Stable Metal Base: Burner is mounted to a highly stable cast iron base that prevents tipping even when the hose is attached..
Adjustable: Both air and gas supply can be adjusted, allowing individual control of flame height and temperature..
Service: Enjoy a smooth & worry-free return service within a month! An questions feel free to contact us, we will be here for you..

【MULTIPLE PROTECTIONS】：Automatically shuts off gas supply when flame goes out accidentally and ignition is unsuccessful. Anti-freezing....
【QUICK CONNECT GAS INLET】: Easy to install gas pipe by one hand, with more safety for preventing any gas danger at the same time. And its compact....
【CSA CERTIFIED】：The gas quick fittings-CSA approved, to make sure no gas leaks risk when connection and simplify the connection without tools,....
【LIGHTWEIGHT PORTABLE BODY】: Body size: 17.3”*11.8”*5.3”, net weight: only 12 lb! And this 1.58 GPM portable tankless water can bring....
【ON DEMAND HOT WATER 】: Delivers 41,000 BTU per hour at high output setting.Its maximum temperature rise is 167℉(75℃), and this portable water....

GAS TYPE & PRESSURE - Gas Type: Natural Gas (NG). Inlet gas pressure: 1/2 PSI. Outlet pressure range: 3" - 6" Water Column.
PIPE THREAD SIZE - 3/4" Inlet & 3/4" Outlet FPT GAS PIPE. Make sure you measure the gas pipe or regulator opening as close to 1-1/16 inch as shown in the picture’s table..
CAUTION - This regulator has 1-1/16" openings for 3/4" gas pipes. The 3/4" gas pipe means interior diameter 3/4" but outside diameter is 1-1/16.

Bunsen burner is one of the high temperature heating tools commonly used in scientific laboratories. The Bunsen burner can safely burn gaseous fuel, and the flame does not flow back into the gas supply pipe. Gas or natural gas, propane gas, etc. are usually used for fuel..
Bunsen burners can be used to heat non-combustible objects or solutions. It can be used to heat objects to very high temperatures. The maximum temperature can be close to 1200 °C. Because the operating temperature is higher than the alcohol lamp, the material of the lamp must use a heat-resistant metal..
To connect to the burner, please use a gas hose with inner diameter of 8-9 mm (5/16" or 3/8")..
With gas regulator, air intake regulator, and flame stabilizer.Can be used with natural gas and liquid propane.Flame Adjustable: Needle valve fitted above the base can realize easily control the flame, Multiple flames for multiple purpose..
Base diameter - 7.8cm/3.07in, height - 17.5cm/6.89in Materail: Zinc alloy base & copper tube, Weight: Approx. 224g.

GAS TYPE & PRESSURE - Gas Type: Natural Gas (NG). Inlet gas pressure: 1/2 PSI. Outlet pressure range: 4" - 8" Water Column.
PIPE THREAD SIZE - 1/2" Inlet & 1/2" Outlet FPT GAS PIPE. Make sure you measure the gas pipe or regulator opening as 13/16 inch..
CAUTION - This regulator has 13/16" openings for 1/2" gas pipes. The 1/2" gas pipe means interior diameter 1/2" but outside diameter is 13/16"..
MARKING - Model: RV47L, Marking: 1/2 PSIG, Po 4" - 8". Inlet pressure 1/2 PSI. Adjustable outlet pressure 4" - 8" Water Column..
OPERATE TEMPERATURE - 32°F - 225°F (0°C - 107°C). Overall Dimension: 2-7/8” W x 2-1/4” D x 2-1/2” H. This is a small size regulator. Refer to pictures for detailed dimensions..

GAS TYPE & PRESSURE - Gas Type: Natural Gas (NG). Inlet gas pressure: 1/2 PSI. Outlet pressure range: 3" - 6" Water Column.
PIPE THREAD SIZE - 1/2" Inlet & 1/2" Outlet FPT GAS PIPE. Make sure you measure the gas pipe or regulator opening as close to 13/16 inches as shown in....
CAUTION - This regulator has 13/16" openings for 1/2" gas pipes. The 1/2" gas pipe means interior diameter 1/2" but outside diameter is 13/16", refer....
MARKING - Model: RV48L, Marking: 1/2 PSIG, Po 3" - 6". Inlet pressure 1/2 PSI. Adjustable outlet pressure 3"-6" Water Column..
OPERATE TEMPERATURE - 32°F - 225°F (0°C - 107°C). Do not install the regulator too close to the heating equipment or use in very cold environment.....

✅QUALITY- Made of a highly-durable brass for strength and durable for every use. The straight pattern check valve has a working pressure of 125 PSI - 200 Water, Oil, and Gas (WOG) for product safety..
✅FUNCTIONALITY- The valve is designed to keep fluids from backing up into the water supply such as backflow from wells and boiler systems..
✅MEASUREMENT- The swing check valve is equipped with a 2 inch female iron pipe (FIP) threaded connection..
✅SAFETY- The EZ-FLO swing check valve is lead free and suitable for all potable water supply installations..
✅INSTALLATION- Must be installed horizontally. For use in residential and commercial settings..