Best Pe Gas Coil Pipe

Shok Blok SB-FPV-40 Water Filter Pressure Regulator Protection Valve for RO & Filter Systems - 1/4\ QC Ports, 40 PSI

GAS TYPE & PRESSURE - Gas Type: Natural Gas (NG). Inlet gas pressure: 1/2 PSI. Outlet pressure range: 3" - 6" Water Column.
PIPE THREAD SIZE - 3/4" Inlet & 3/4" Outlet FPT GAS PIPE. Make sure you measure the gas pipe or regulator opening as close to 1-1/16 inch as shown in the picture’s table..
CAUTION - This regulator has 1-1/16" openings for 3/4" gas pipes. The 3/4" gas pipe means interior diameter 3/4" but outside diameter is 1-1/16.

Check Stock

iSpring 14702 APR40 Pressure Regulator Filter Protection Valve with 1/4\ Quick Connect, 40 Psi, white

GAS TYPE & PRESSURE - Gas Type: Natural Gas (NG). Inlet gas pressure: 1/2 PSI. Outlet pressure range: 4" - 8" Water Column.
PIPE THREAD SIZE - 1/2" Inlet & 1/2" Outlet FPT GAS PIPE. Make sure you measure the gas pipe or regulator opening as 13/16 inch..
CAUTION - This regulator has 13/16" openings for 1/2" gas pipes. The 1/2" gas pipe means interior diameter 1/2" but outside diameter is 13/16"..
MARKING - Model: RV47L, Marking: 1/2 PSIG, Po 4" - 8". Inlet pressure 1/2 PSI. Adjustable outlet pressure 4" - 8" Water Column..
OPERATE TEMPERATURE - 32°F - 225°F (0°C - 107°C). Overall Dimension: 2-7/8” W x 2-1/4” D x 2-1/2” H. This is a small size regulator. Refer to pictures for detailed dimensions..

Check Stock

General Tools Hose and Tubing Cutter #115 - Cuts up to 2 Inch Flexible Rubber, PVC, ABS and Polyethylene Tubing

CUTS RUBBER TUBING: Cuts up to 2-inch rubber hose or tube..
CUT PE OR ABS PIPE: Cuts up to 1-1/2 inch PE and ABS pipe..
CUTS PVC PIPE: Cuts up to 1-1/4 inch PVC pipe..
HOLDS TIGHT: The curved holder supports the hose or tubing during square cuts..
LONG HANDLES: Long handles for added leverage..

Check Stock

Maxitrol RV48L Natural Gas Pressure Regulator 1/2 FPT Thread 13/16 In and Out Opening 1/2 PSIG In 3 -6 WC Out

GAS TYPE & PRESSURE - Gas Type: Natural Gas (NG). Inlet gas pressure: 1/2 PSI. Outlet pressure range: 3" - 6" Water Column.
PIPE THREAD SIZE - 1/2" Inlet & 1/2" Outlet FPT GAS PIPE. Make sure you measure the gas pipe or regulator opening as close to 13/16 inches as shown in....
CAUTION - This regulator has 13/16" openings for 1/2" gas pipes. The 1/2" gas pipe means interior diameter 1/2" but outside diameter is 13/16", refer....
MARKING - Model: RV48L, Marking: 1/2 PSIG, Po 3" - 6". Inlet pressure 1/2 PSI. Adjustable outlet pressure 3"-6" Water Column..
OPERATE TEMPERATURE - 32°F - 225°F (0°C - 107°C). Do not install the regulator too close to the heating equipment or use in very cold environment.....

Check Stock

PATIKIL Hose Barb Fitting Elbow 8mm Barbed M14x1.5 Male Thread 2 Pack Carbon Steel Pipe Adapters Connectors for Air Water Fuel Oil Gold

Overall Size: 46 x 35mm / 1.81 x 1.38 inch (L*W).
Advantage: Carbon steel material features high strength, high pressure, and high-temperature resistance. Leakproof comes with 2 washers for good sealing performance.
Instruction: The thread-to-barb pipe fitting is commonly used to connect pipes such as air, gas, water, oil, and fuel in a quick and simple way..
Application: The thread-to-barb pipe fitting is a coupling for joining 2 diameter sizes pipes in different directions. Can be used with PE, nylon and PU tubing in industrial environments, for many fluids.
Notice: Please confirm the correct size before ordering. You can dip the end of the tubing/hose in hot water for a while for push-on installation easily.

Check Stock

IKENIUP One Stop Gas Appliance Hook Up Kit, 22'' Stainless Steel Flexible Gas Connector with 1/2''Brass Gas Shutoff Valve for Gas Log, Gas Dryer, Garage Heater, Gas Stove, Wall Heater and Fireplace

INCLUDES EVERYTHING FOR INSTALLATION - This Gas Appliances Installation Kit Includes 22” flexible gas line (with 1/2" Female Flare on both end) , 3 different adapters (1/2" Male Flare x 1/2" Male Pipe, 1/2" Male Flare x 3/8" Male Pipe & 1/2" Male Flare x 3/8" Female Pipe), 1/2" brass gas shut off valve, and yellow gas pipe thread seal tape. It has everything needed for installing most gas appliances and easy to install..
HIGHLY DURABLE & LONG SEVERITY LIFE - Made of High Quality 304 Stainless Steel. Designed for safe, optimal flow rate, the flow capacity is up to 150K BTU. This dryer gas line kit is 100% Leak Tested, CAS certified.
it has good air tightness, durability, rust and corrosion resistance. It is the perfect choice for hooking up your gas appliances..
CORRUGATED DESIGNED - The stainless steel gas line is designed with corrugation, which has high-level flexibility and is not easy to be damaged. Can be better used in a narrow range. Also, the corrugated gas line connector has staggered spacing every 2 inches to eliminate noise..
BRASS GAS SHUT OFF VALVE - The shut off valve is a great feature that allows you to directly shut off the flow instead of operating on the appliances. It is convenience for servicing appliances or summer shutdown..

Check Stock

Slime 40069 Inflation Station, Garage Inflator, Pro-Series, Wall Mounted Air on Demand, Flat to Full in 4 Minutes, Cars, Trucks, Bicycles, 120V,Black

【Size】- 37FT length 1/2" gas pipe size: 12mm inner diameter x 16mmOD (0.48" inner diameter x 0.63 "outer diameter), so Our natural gas hose can provide up to 100,000 BTU/hour of Flow Capacity, and provide sufficient airflow for larger sizes equipment to meet your more needs..
【Application 】- Gas line Used to Connects any indoor/outdoor Natural Gas or Liquid propane applications to the gas supply piping, such as fire pit gas tube, gas range pipe, water heater gas hose,Generator gas tube,Compressor gas tube,Grill gas line.etc.
【Sturdy material 】- The inside of the flexible gas line is stainless steel SUS304 corrosion-resistant material, the surface layer is 0.079inch UV-resistant yellow polyethylene jacket, Comes with a 1/2" MALE Brass fittings on both end, Standard Male and Female Pipe Threads for easy connections..
【Flexible and Safety】- Corrugated Stainless Steel Tubing is flexible and can be cut into any length you need,easily snakes into attic and basements areas, around corners and bends, Using one-piece molding exquisite Craft, There is no interface in the middle of the pipe body, re....

Check Stock

MST-101 Automotive Electronic Faults Detector, Spark Tester Pen, Auto Ignition Coil Tester Tool

【Fitment】Ignition Coil(traditional coil, double spark coil, single spark coil) generator, fan, electric-magnetic valves, emission gas controlling value, fuel injectors, relay. etc..
【Features】You can quickly and easily diagnose whether the ignition system of the car is working properly, avoid fire, and burn out the ignition coil. It provides a safe and reliable troubleshooting method that is convenient, economical and time-saving..
【Long-lasting】The Spark Tester is adopted to the high-quality aluminum material with high quality. The internal LED light will show you if the ignition system is normal. The ABS head is easy to insert and long-lasting, making it the right choice..
【Long-lasting】The car to be tested should park at an area with good air condition, can not suck into exhaust emission from engine. During test process, it is necessory to avoid the moving parts and heat source to protect tester and testing equipments..
【Good Performance】Excellent mechanical stability and corrosion protection. Professional manufacturing, high accuracy.

Check Stock

50 Ft Air Conditioning Copper Tubing Pipe Extension, 1/4' 1/2' 3/8' PE Thickened for Mini Split AC and Heating Equipment Insulated Coil Line HVAC Refrigerant with Nuts (1/4' & 3/8'* 3/8' PE WITH NUTS)

1.50 Ft. copper tube showing no leaks with high and low pressure twin lines..
2.1/4" & 3/8" O.D. for Mini Split Air Conditioners..
3.Copper coil line set for ductless mini split air conditioner and heat pump systems..
4. With embossed polyethyene film, Flame-retarded, 3/8" PE thickness matches with most of the PVC cover in the market..
5.Comes with 50 Ft air conditioning drain hose, 5 pipe insulation straps..

Check Stock