Best Force Measurement

Mxmoonfree 500N Digital Force Gauge Push Pull Gauge with Force Gauge Stand Wheel-Operated Manual Push Pull Test Stand Stroke 180mm/7\ with Digital Scale and HJJ-001 Clamp x2 (HLD Test Stand+HP-500N)

  • USB DATA OUTPUT - The Digital Force Gauge 500N can store up to 999 sets of PEAK test data. You can use the attached CH340 chip USB data cable to connect to a laptop and export real-time measurement data..
  • FREE SOFTWARE - We provide free software that can export test data or charts (force versus time curve). You can contact us to get the software. Mxmmonfree provides a 365-day warranty service and free technical support..
  • VARIOUS ACCRSSORIES - Digital Force Meter comes with Compression test parts *4, Tenslie test part *1, Extension rod *1, which are able to meet most of simple tests. The gauge and various accessories can be put into the carrying case for convenient storage. Test Sand comes with screws for installing the gauge and 2 pcs HJJ-001 Clamp for tensile tests..
  • DIGITAL DISPLACEMENT SCALE - This HLD Test Stand has a digital displacement scale (no output function), which can help you measure the displacement during the test. Measurement Range: 0-6"/ 0-150mm | Resolution: 0.0005"/ 0.01mm.
  • GAUGE PARAMETERS - Model: HP-500N | Capacity: 500N/110lbf/50Kgf | Resolution: 0.1N/0.01lbf/0.01Kgf | Accuracy: ±0.5% | Data Output: USB output | Lithium Battery: 5V, 1700mAh | Charger: Input (AC 100-240V 50-60Hz), Output (DC 5V 0.5A) | 2 sets of Installation Dimens....
Check Stock

Mxmoonfree 500N Digital Force Gauge Push Pull Gauge with Force Gauge Stand Force Test Stand Lever-Operated 70mm Stroke and HJJ-001 Clamp x1 (HPB Test Stand+HP-500N)

  • ... to 12.6 inches. When HP-series force gauge is installed, the height of the bottom of the gauge can be adjusted between 1.5 inches and 10.2 inches..
  • DISPLACEMENT SCALE - The digital displacement scale (no output function) helps you measure the displacement during the test. Measurement Range: 0-6"/ 0-150mm | Resolution: 0.0005"/ 0.01mm. And each force gauge stand comes with 1 Pcs HJJ-001 clamp..
  • VARIOUS TEST PARTS - Pressure test parts *4, Tenslie test part *1, Extensive shaft *1, which are able to meet most of the experimental requirements. The portable digital force gauge and various accessories can be put into the carrying case for convenient storage and carrying..
  • DATA STORAGE & OUTPUT - The digital force gauge can use USB for data output, and we provide free SOFTWARE for data analysis and recording. Each package will contain an RS-232→USB data cable. 【NOTE】If you need software, please find us to get it after completing the order..
  • RECHARGEABLE BATTERY - The force gauge with USB output is equipped with a built-in Lithium battery and an AC adapter. When fully ....
Check Stock

BAOSHISHAN NK-500N Force Gauge Push Pull Gauge Analog Mechanical Meter Tester with Portable Carrying Case

  • [PARAMETER] -- Capacity: 500N | Resolution: 2.5N | Unit: N/kg | Stroke: 10mm | Accuracy: ±1% | Net weight: 1.3kg/2.8lb | Relative moisture: 15%~80%RH | ONE YEAR warranty and professional technical support.
  • [HIGH QUALITY & ACCURACY] -- The shell of the tension force gauge is made of high-quality ABS plastic, with high strength and good toughness. The pointer dial is convenient for reading, accurate measurement and high precision..
  • [VARIOUS ACCESSORIES] -- Pressure test parts *4, Tenslie test part *1, Extensive shaft *1, which are able to meet most of the experimental requirements. The spring tension scale and various accessories can be put into the carrying case for convenient storage and carrying..
  • [PEAK/TRACK] -- The knob controller on the pull gauge can switch between the peak value load test and the continuous load test. Switching modes according to different experimental occasions can bring great convenience to your experiment..
  • [WIDELY APPLICATION] -- The handheld force gauge is widely applied in pull push load testing industry like electric, high & low voltage electric appliance, hardware, automobile parts, lighter and ignition system, light industry, mechanical, textile and insertion force or destructive experiment..
Check Stock

Digital Force Meter, 0N/100N/300N/500N Digital Display Dynamometer Force Gauge Push and Pull Tester Meter with 5 Side Heads for Industries Machinery (100)

  • HIGH QUALITY: This push-pull force gauge is made of high-quality metal + plastic materials, strong and durable, not easy to damage, and long service life..
  • TWO MODES: This digital push-pull force gauge supports peak/real-time two modes, adapting to changes.
  • it supports real-time display of values and also supports keeping the peak value unchanged..
  • INSTANT READING: high-definition large-screen display, high sensitivity, graduation value of 0.01, accurate value of thrust and pull, digital display design, reading is more intuitive, clear and convenient..
  • MULTIPLE UNIT CONVERSION: Newton, kilogram, pound and other commonly used measurement units can meet a variety of needs and are more convenient to use..
  • WIDELY USED: Digital push-pull force gauges are now widely used in electronics, high and low voltage electrical appliances, automobiles, chemicals, light industry, construction and other industries and scientific research institutions for tensile and compression loads, insertion and extraction forces, destructive test tests, etc..
Check Stock

QKVCX Shooting Speed Tester Precision Ballistic Chronograph Bullet Bow Arrow Velocity Meter Measurement Tool with Tripod.

  • Aluminum alloy, stainless steel material, support rod, velocity measurement, energy measure, speed energy, looking through record and view average..
  • It is mainly used to learn and experience the ability of the SCM to process data at high speed, and it can measure the flying speed of various projectiles. Such as: table tennis, badminton, bow, arrows, physical acceleration experiment, projectile free fall experiment, nerf playthings speed measurement, children's soft playthings, etc..
  • Test the speed of the shooting toy to prevent excessive force and unsafe. It is a must-have product to prevent the safety risks of shooting toys..
  • The device is accurate with +/-1% of measured velocity, or better..
  • Can be mounted on tripop or just placed on table/bench top..
Check Stock

OXO Steel Single Wall Cocktail Shaker

  • Single-wall Stainless Steel cocktail Shaker features two silicone gaskets to create a leak-proof seal.
  • Parts are easy to separate without excessive force or fear of sticking.
  • Cap also functions as a jigger with printed Measurement markings ½ oz ¾ oz 1 oz and 1 ½ oz.
Check Stock

AQUA TRAINING BAG® Sensor

  • LEVEL UP YOUR TRAINING – Link to your smartphone with our FREE App to track past workouts and store your data.
  • ROUND-BY-ROUND ANALYTICS – Measure your rounds with Punch Force, Hardest Punch, Punch Calorie Measurement, and Punch Frequency Indicators.
  • PERSONALIZED USER EXPERIENCE – Personalize your workout with Power Punch Threshold, Round Timer and Start/Stop Bell customizations.
  • EXCLUSIVE COMPATIBILITY – The Aqua Training Bag Sensor works exclusively with 15”, 18” and 21” Aqua Training Bags.
Check Stock

HORUSDY 30-Piece Hex Key Set, Allen Wrench Set Inch/Metric MM(0.7mm-10mm) SAE(0.028\-3/8)

  • Heat-treated steel with black-oxide finish, contains 15 pieces of long reach keys and 15 pieces of high leverage short keys..
  • The conventional drive end on both the long and short length keys, allows high leverage on stubborn fixings..
  • Come with a torque handle for adding force when loading and unloading the fasteners,Increase extra reach and greater torque..
  • This 30-pieces AlHigh-visibility sizes marked on each wrench and sturdy carrying case for fast size selection and easy organizationlen key set completely covers all hexagon socket screws and contain both inch and metric measurement.
  • This 30-pieces Allen key set completely covers all hexagon socket screws and contain both inch and metric measurement.
Check Stock

INPANOLS Magnetic Z Axis Zero Pre-Setter Tool Setter for CNC Milling Machining Lathe Centers, 50mm Height, 0.01mm Accuracy

  • ★LARGE MEASURING SURFACE: Measuring surface diameters up to 44mm for easy handling.
  • The step design allows the tool setter to test tools with a diameter greater than 44mm..
  • ★STRONG MAGNETIC DESIGN: The Z-Axis Pre Setter has 3 strong magnets embedded in the bottom, easy to fix and non-slip, and can be used horizontally or sideways..
  • ★EASY TO CALIBRATE: Easy to be calibrated by a polished parallel plate or calibration metal rod..
  • ★SMALL SPRING FORCE: The elastic force of the spring inside the measuring surface is small, which can effectively avoid the breakage of small milling cutters or small drills..
Check Stock