Best Flanged Cap Nuts

Glarks 50Pcs 1/4 -20x20mm Threaded Inserts Nuts Zinc Plated Carbon Steel Hex Socket Drive Furniture Flanged Screw-in Nut with M6 Hex Wrench for Wood Furniture 1/4 -20 x 20mm

  • ♛【What You Get:】 In this set, you will get 50pcs threaded insert nuts, which Internal thread insert type is 1/4"-20, external diameter is 10.5mm/0.41inch, total length is 20mm. Along with a 6mm hex wrench to help your installation more fast and convenient..
  • ♛【High Quality:】 All the inserts nuts are made of high quality carbon steel and with yellow zinc plated on the surface, make them have high hardness, perfect wear and rust resistance, smooth surface without burr, non-slip flanged design..
  • ♛【Product Feature:】Our insert nuts are constructed with standard hex socket head, smooth and flat, features flanged thread texture, strong and durable, good for your wood furniture use..
  • ♛【Easy to Use:】 First using the bit to pre-drill a well-sized hole, which depth is 1-2mm longer than furniture screw, then use the internal hex wrench to screw in. Please attention that if the furniture wood is with high-hardness, please enlarge the screw hole..
  • ♛【Wide Application:】 These inserts nuts are strong and durable will works good for for soft woods of pine, plywood, fiberboard.
  • also great used for hard wood, such as solid wood, have a good effect in the advanced furniture combination..
Check Stock

Glarks 216Pcs 3030 Series Aluminum Profile Connector Set Include 20Pcs 3030 Corner Bracket, 40Pcs M6 T Nuts, 4Pcs 3-Way End Corner Bracket Connector, M5 x 20 Button Head Screw Bolts and Flat Washers

  • ♛【What You Get】: Our 3030 series aluminum profile connector set include 20pcs 3030 corner bracket, 40pcs m6 t-slot nuts, 4pcs 3-way end corner bracket connector, 40pcs flanged button head socket cap screws bolts, 40pcs flat washers and 40pcs lock washers, 32pcs allen head socket set screws, total 216pcs are well packed avoid mess..
  • ♛【Durable Quality】: The corner brackets are made of aluminum, the socket cap screws and nuts washers are made of high quality 304 stainless steel, anti-rust and corrosion resistance, can be applied for a long time, you won't worried broken after installed..
  • ♛【Easy to Use】: Our angle bracket is mainly uesd to reinforce right-angle corner joints of aluminum extrusion profiles, easy to use no tool needed. Insert the two ends of the bracket into the groove of the profile, put on the flat washer and lock washer, and tighten the screw to fix the two profiles..
  • ♛【3030 Series】: Our corner bracket set is fit for 3030 series aluninum extrusion, can be used DIY 3D printers, CNC routers, CNC laser cutters, robotics projects and so on..
  • ♛【Wide Application】: Our complete corner bracket kit are matched well with each other, can be widely used in home, office and factory area, like the connection of cabinets, tab....
Check Stock

Glarks 120Pcs 1/4\-20, 5/16\-18 Threaded Inserts Nuts Assortment Set, Zinc Plated Carbon Steel Hex Socket Drive Furniture Flanged Screw-in Nut with M6 M8 Hex Wrench for Wood Furniture

  • ♛【What You Get:】 In this inserts nuts set, you will get 120pcs 1/4"-20, 5/16"-18 threaded nuts assorted kit for your wood furniture use. Which are constructed with standard hex socket head, smooth and flat, features flanged thread texture. Along with 2 hex wrench to help your installation more fast and convenient..
  • ♛【High Quality:】 All the inserts nuts are made of high quality carbon steel and with yellow zinc plated on the surface, make them have high hardness, perfect wear and rust resistance, smooth surface without burr, non-slip flanged design..
  • ♛【Product Size:】 80pcs nut which Internal thread insert type is 1/4"-20, external diameter is 10.5mm/0.41inch. 4 sizes of 1/4"-20x10mm, 1/4"-20x15mm, 1/4"-20x20mm, 1/4"-20x25mm.
  • 40pcs nut which Internal thread insert type is 5/16"-18, external diameter is 14mm/0.55inch. 4 sizes of 5/16"-18x12mm, 5/16"-18x15mm, 5/16"-18x20mm, 5/16"-18x25mm, with m6 m8 hex wrench. Multiple size meet your different needs..
  • ♛【Easy to Use:】 First using the bit to pre-drill a well-sized hole, which depth is 1-2mm longer than furniture screw, then use the internal hex wrench to screw in. Please attention that if the furniture wood is with high-hardness, please enlarge the screw hole..
Check Stock

Gretsch CM1E826PWG 2014 Catalina Maple 7-Piece Rock Shell Pack and 22 Inch Kick with Free Additional 8 Inch Tom - Walnut Claze

  • Bass drums include telescopic bass drum spurs and matching maple wood bass drum hoops. Toms and snare drums feature 2.3mm triple flanged hoops. All drums are fitted with Remo drum heads.
  • Mounting Hardware: Low profile GTS tom suspension system.
  • Low-profile tom and floor tom leg brackets.
  • Gretsch T-Wing nut/bolt & "Gas cap" bass drum mount plate with "G" memory lock.
  • Hoops - Snare: 2.3mm triple flanged, Toms: 2.3mm triple flanged & Bass: Maple with matching lacquer or wrap inlay.
Check Stock

Canitu 135Pcs Threaded Inserts Nuts Assortment Set, Zinc Plated Carbon Steel Hex Socket Drive Furniture Flanged Screw-in Nut with M4 M5 M6 M8 M10 for Wood Furniture with 5Pcs Hex Wrench

  • ☼ Threaded insert nuts provide a strong, permanent thread for wood and wood based sheet materials. The unique external thread ensures strong resistance against pull out and the flanged head prevents splitting of the surfaces and driving the Insert in too far..
  • ☼ High quality carbon steel with high hardness. These furniture screws are wear-resistant and very durable to use. Standard internal hex socket type without burr and non-slip design. Yellow zinc plated surface, anti-corrosion and anti-oxidation, with no burr and flanged anti-slip design, wear-resistant and very practical..
  • ☼ Convenient to use and carry. Pre-drill a proper hole (Suggest that the diameter of the hole is 9.6 +/- 0.2mm, the length is about 18mm), then use our internal hex wrench to screw in. Tip: If the furniture wood is with high-hardness, please enlarge the hole..
  • ☼ Total quantity: 135 pieces of Hex Inserts Nuts & 5Pcs of matching wrenches (35pcs M4*10, 30pcs M5*10, 25pcs M6*10, 10pcs M6*15, 15pcs M8*15, 10Pcs M8*20, 5pcs M10*20). Storage in a plastic case for easy acces..
  • These inserts nuts are strong and durable will works good for for soft woods of pine, plywood, fiberboard.
  • also great used for hard wood, such as solid wood, have a good effect in the advanced furniture com....
Check Stock

WELLUCK 15 Amp Flanged Inlet 125V, NEMA 5-15 RV Shore Power Inlet Plug w/Waterproof and Back Cover, 2 Pole 3-Wire AC Port Plug, Generator Male Receptacle for Marine Boat RV Shed Electrical Extension

  • 【15 Amp Flanged Inlet】: No oxidation for the Nickel coated copper pole on the plug, made of premium copper and Nylon plastic to avoid the damage of UV degradation and chemicals, rugged and durable for indoor and outdoor..
  • 【Easy Reliable Installation】: 2" Hole size required, clear see-thru wiring block (Black-Hot, Green-Ground, Silver-Neutral), and 4 long Stainless Steel screws will fix straight blade flanged inlet on the hole or wall more tightly. No gap on the edge!.
  • 【 Weatherproof Cover】: ETL approved, and the flanged power inlet cap and back cover will protect it from the rain storm, snows, dust and even works well in Western Colorado winters, without crack and leak..
  • 【Wire Up As You Wish】 : Define the Length and Diameter of the cord based on actual need. Flanged electrical inlet receptacle accommodates 12-18 AWG gauge wires, suitable for No. 12-3 through No. 18-3 cords grip..
  • 【Widely Compatible】: As a generator or battery charger plug to energize your electrical devices. Widely used in trailer, camper, RV, car, boat, marine, block heater,home, bumper, recessed outlet box, etc.
Check Stock

POWERTEC QTI1001 Threaded Inserts for Wood | 3/8”-16 Internal Threads, Zinc Alloy – 50 Pack

  • QUALITY: Manufactured with premium zinc alloy, these woodworking fasteners are able to deliver exceptional strength, long-term durability and optimal performance.
  • APPLICATIONS: Perfectly suitable for furniture assembly, display cases, and projects utilizing plywood, fiberboard, composition board, pine, or other soft wood material.
  • Drill a hole sized for the body of the insert, and install these flanged nuts with a hex key.
  • SPECS: 3/8-16 threaded insert | 63/64” Long.
Check Stock

Wanyifa Titanium DIN6923 M5 M6 M8 M10 M12 M14 M16 Hex Flange Nuts pack of 6 (M6 Pitch 1.0mm, Rainbow)

  • Product Type : Serrated Flange Nuts 3/8-16..
Check Stock

Steel Hex Nut, Plain Finish, Grade 8, 1\-8 Threads, 1.732\ Width Across Flats, 0.887\ Height (Pack of 10)

  • Flanged hex nuts with serrated face, reducing the chance of damage to the part and making it less likely to loosen as a result of an uneven fastening surface..
  • Made of high quality stainless steel 304, provides strength and protection from corrosion and tarnishing..
  • Package Included: 50 PCS M5-0.80 serrated flange hex nuts..
Check Stock