Best Fiberglass Paint For Boats

Direct 2 Boater Fiberglass Stain Remover Gel 16 oz - Jar FSR Cleaner, FSR Boat Cleaner, FSR Stain Remover, FSR Gel, Rust Remover

  • ⚓ Strong Marine FSR FIBERGLASS STAIN REMOVER for Removing Rust, Oil, Boat Exhaust And Waterline Stains From Boats, Stainless Steel And Concrete. Ideal Hull Cleaner For Boats, works on Fiberglass Boats and as a Fiberglass Restorer..
  • STAIN ABSORBING and great for removing Rust from Stainless Steel and Deck or Hull areas. Ideal Boat Rust Stain Remover, Fiberglass Cleaner for Boats, Rust Remover for Fiberglass, Rust Stain Remover for Concrete & Rust Stain Remover for Clothes..
  • REMOVES RUST STAINS from SAIL CLOTH, CLOTHING, FABRICS AND CONCRETE. Works as Concrete Rust Stain Remover, Fabric Rust Remover, Hull, Stainless Steel Cleaner for Boats, Rust Remover Concrete, Rust Remover for & Boat Cleaner Fiberglass Hull Fabric.
  • NO SANDING or compounding needed, Remove Rust Stains easily. Ideal Gift for Boaters or Gifts for Boat Owners as works a Fiberglass Boat Restoration and Boat Stain Remover. Ideal Rust Remover for Boats, Boat Fiberglass Cleaner & Boat Hull Cleaner for Fiberglass.
  • RUST AND STAIN REMOVER IS EASY TO USE: Apply with cloth, sponge or brush. Allow to sit for several minutes. Then wipe off or remove with water. Ideal Fiberglass Boat Cleaner, Rust Cleaner, Rust Remover Steel, Rust Remover Clothes. Gifts for Boaters.
Check Stock

Interlux YBA068A/16 Trilux 33 Aerosol Antifouling Paint - White, 16 oz.

  • HIGH-PERFORMANCE MARINE ANTIFOULING BOAT BOTTOM PAINT provides superior single-season protection against barnacles, weeds, algae & slime in fresh water, salt water, and brackish water.
  • COPPER FREE FORMULA won't cause galvanic corrosion on aluminum boats, outdrives and trim tabs.
  • copper-free paint also means colors are much brighter than bottom paint that contains copper biocide.
  • FOR USE ON FIBERGLASS, WOOD, STEEL, IRON & ALUMINUM BOATS below the waterline only.
  • haul and relaunch without losing the effectiveness of the biocide.
  • EASY TO APPLY: For brushing, use a high-quality, natural bristle brush.
  • for rolling, use a 3/16” nap or foam solvent-safe roller cover.
  • if needed, thin with TotalBoat Special Brushing Thinner 100 (brushing/rolling) or TotalBoat Spray Thinner 101 (spraying).
  • AVAILABLE IN FIVE BRIGHT, VIBRANT COLORS: Blue (Quart & Gallon), Black (Quart & Gallon), White (Quart & Gallon), Green (Gallon only), and Red (Gallon only).
  • after applying, there’s no maximum dry time before launch.
Check Stock

Fiberglass Oxidation Remover and Color Restorer - 16 oz - Protect All 55016

  • [VERSATILITY:] Protect All Fiberglass Oxidation Remover and Color Restorer works on RVs, cars, trucks, boats and more.
  • [PERFORMANCE]: Removes oxidation, bug stains, wax build-up, surface scratches and hard water spots.
  • [CONVENIENCE]: The one-step formula cleans, polishes and seals the surface, removing oxidation to expose a clean layer of fiberglass or paint.
  • [UTILITY]: Restores color and luster to dull, oxidized fiberglass, gel-coat, enamel and polyurethane painted aluminum.
  • [SAFETY]: Leaves a protective finish on the surface, ensuring a lasting shine and helping eliminate future damage.
Check Stock

TotalBoat JD Select Ablative Antifouling Bottom Paint for Fiberglass, Wood and Steel Boats (Blue, Gallon)

  • ANTIFOULING PAINT FOR BOATS: Unique hybrid paint film keeps barnacles, weeds and slime from clinging to the bottom of your power boat or sailboat for a full season.
  • ideal for fiberglass, wood and steel boats in salt water and fresh water.
  • ABLATIVE BOTTOM PAINT: Self-polishing coating wears away gradually as the boat moves through the water.
  • minimizes bottom paint build up so you have less sanding to do next season.
  • durable finish can be burnished for smoothness, speed & fuel efficiency.
  • LOW ODOR, LOW VOCs, EASY CLEANUP: This low-VOC, water-based marine paint has no toxic fumes, and cleans up easily with soap and water.
  • ideal for use in marinas and boat yards with environmental restrictions.
  • EASY TO APPLY BY BRUSH, ROLLER OR SPRAY: Brush – natural bristle.
  • Roller – 3/16” nap or foam solvent-safe cover.
  • AVAILABLE IN BLACK, BLUE, GREEN & RED COLORS in Quart and Gallon sizes.
  • Coverage: 500 sq. ft. per gallon. Compatible with most previously applied bottom paints: Apply over existing ablative or hard bottom paints.
  • for use on boat bottoms & hulls below waterline only.
Check Stock

TotalBoat JD Select Ablative Antifouling Bottom Paint for Fiberglass, Wood and Steel Boats (Black, Gallon)

  • ANTIFOULING PAINT FOR BOATS: Unique hybrid paint film keeps barnacles, weeds and slime from clinging to the bottom of your power boat or sailboat for a full season.
  • ideal for fiberglass, wood and steel boats in salt water and fresh water.
  • ABLATIVE BOTTOM PAINT: Self-polishing coating wears away gradually as the boat moves through the water.
  • minimizes bottom paint build up so you have less sanding to do next season.
  • durable finish can be burnished for smoothness, speed & fuel efficiency.
  • LOW ODOR, LOW VOCs, EASY CLEANUP: This low-VOC, water-based marine paint has no toxic fumes, and cleans up easily with soap and water.
  • ideal for use in marinas and boat yards with environmental restrictions.
  • EASY TO APPLY BY BRUSH, ROLLER OR SPRAY: Brush - natural bristle.
  • Roller - 3/16” nap or foam solvent-safe cover.
  • AVAILABLE IN BLACK, BLUE, GREEN & RED COLORS in Quart and Gallon sizes.
  • Coverage: 500 sq. ft. per gallon. Compatible with most previously applied bottom paints: Apply over existing ablative or hard bottom paints.
  • for use on boat bottoms & hulls below waterline only.
Check Stock

Boatbuilding For Beginners : Everything You Need To Know To Build, Paint And Fiberglass Your Boat

  • ANTIFOULING PAINT FOR BOATS: Unique hybrid paint film keeps barnacles, weeds and slime from clinging to the bottom of your power boat or sailboat for a full season.
  • ideal for fiberglass, wood and steel boats in salt water and fresh water.
  • ABLATIVE BOTTOM PAINT: Self-polishing coating wears away gradually as the boat moves through the water.
  • minimizes bottom paint build up so you have less sanding to do next season.
  • durable finish can be burnished for smoothness, speed & fuel efficiency.
  • LOW ODOR, LOW VOCs, EASY CLEANUP: This low-VOC, water-based marine paint has no toxic fumes, and cleans up easily with soap and water.
  • ideal for use in marinas and boat yards with environmental restrictions.
  • EASY TO APPLY BY BRUSH, ROLLER OR SPRAY: Brush - natural bristle.
  • Roller - 3/16” nap or foam solvent-safe cover.
  • AVAILABLE IN BLACK, BLUE, GREEN & RED COLORS in Quart and Gallon sizes.
  • Coverage: 500 sq. ft. per gallon. Compati....
Check Stock

Bondo Bondo-Hair Long Strand Fiberglass Reinforced Filler, 00762, 1 Quart

  • Long strands of chopped fiberglass deliver twice the strength of regular body filler.
  • Fill holes up to 1” wide and rebuild missing pieces without backing strips, cloth or mat.
  • Versatile filler works with fiberglass, metal and wood.
  • Fast dry formula allows for sanding in only 20 minutes.
  • Compatible with most paints and paint systems.
  • Waterproof formula works great on cars and boats.
  • Suitable for challenging projects such as rebuilding missing pieces, vehicle restoration, shattered fiberglass repair, filling metal rust holes up to 1” in diameter.
  • Easy to use – includes step-by-step instructions.
  • Use during the Fill stage of the 3M Body Repair System.
  • Filler comes with Bondo Red Cream Hardener.
Check Stock

Wayside Pond

  • ENAMEL MARINE PAINT: Get a long-lasting, elegant cruiser blue finish on your boat, bridge, or other marine structure with Duralux Marine Enamel..
  • LONG-LASTING FINISH: This marine structure and boat paint stands up to salt water, oil, gasoline, repeated washings and the discoloration effects of harbor gasses for a long-lasting finish..
  • FOR A VARIETY OF MARINE APPLICATIONS: This single-component topside enamel adheres to primed steel, metal, wood, aluminum and fiberglass – making it ideal for commercial or pleasure boats, offshore oil rigs, bridges, tanks and other structures..
  • EASY TO USE: Apply 2 thin coats of Duralux Marine Paint on a prepared surface with a brush, roller, or airless sprayer. Do not paint in direct sunlight and allow each coat to dry overnight. Packaged in a 1-quart container..
  • FOR ON-SHORE AND OFF-SHORE APPLICATIONS, Duralux Marine Coatings offers a complete line of high-performance enamels, spar varnish and other coatings in a variety of colors.
Check Stock

TotalBoat Krypton Copper Free Antifouling – Marine Ablative Boat Bottom Paint | For Fiberglass, Wood, Aluminum & Steel Boats | Ideal for Outdrives & Trim Tabs (Black, Gallon)

  • HIGH-PERFORMANCE MARINE ANTIFOULING BOAT BOTTOM PAINT provides superior single-season protection against barnacles, weeds, algae & slime in fresh water, salt water, and brackish water.
  • COPPER FREE FORMULA won’t cause galvanic corrosion on aluminum boats, outdrives and trim tabs.
  • copper-free paint also means colors are much brighter than bottom paint that contains copper biocide.
  • FOR USE ON FIBERGLASS, WOOD, STEEL, IRON & ALUMINUM BOATS below the waterline only.
  • haul and relaunch without losing the effectiveness of the biocide.
  • EASY TO APPLY: For brushing, use a high-quality, natural bristle brush.
  • for rolling, use a 3/16” nap or foam solvent-safe roller cover.
  • if needed, thin with TotalBoat Special Brushing Thinner 100 (brushing/rolling) or TotalBoat Spray Thinner 101 (spraying).
  • AVAILABLE IN FIVE BRIGHT, VIBRANT COLORS: Blue (Quart & Gallon), Black (Quart & Gallon), White (Quart & Gallon), Green (Gallon only), and Red (Gallon only).
  • after applying, there’s no maximum dry time before launch.
Check Stock