Best Marine Paint For Fiberglass Boats 2

TotalBoat Marine Topside Boat Paint Primer for Fiberglass and Wood (Gray, Quart)

ONE-PART MARINE PRIMER FOR BOATS provides a durable, flexible undercoat for 1-part and 2-part polyurethane and enamel marine topside paint.
for use above the waterline on fiberglass, wood, gelcoat and previously painted surfaces in good condition.
COVERS COMPLETELY IN JUST ONE COAT: High-solids primer seals the surface with 1 thin coat.
apply a second coat only if a higher build is needed.
to fill large surface imperfections use TotalBoat TotalFair epoxy fairing compound before applying Topside Primer.
EASY TO APPLY BY BRUSHING, ROLLING OR SPRAYING: Use a natural bristle paint brush, a 1/8 " solvent-safe foam roller, or to spray, use a 1.1mm tip.
boat primer is chromate-free and lead-free.
DRIES FAST, CURES TO A SMOOTH, HARD FINISH: Ready to sand in 60-90 minutes at 65°F.
marine paint primer is easy to sand, then just wipe clean and apply a topside finish such as TotalBoat Wet Edge or TotalTread marine non-skid deck paint.
AVAILABLE IN WHITE AND GRAY IN QUART AND GALLON SIZES. Brush/roller application - thin with TotalBoat Special Brushing Thinner 100.
do not apply Topside Primer thicker than recommended or it may not cure properly.

Check Stock

Vallejo Oily Steel Paint, 17ml

ANTIFOULING PAINT FOR BOATS: Unique hybrid paint film keeps barnacles, weeds and slime from clinging to the bottom of your power boat or sailboat for a full season.
ideal for fiberglass, wood and steel boats in salt water and fresh water.
ABLATIVE BOTTOM PAINT: Self-polishing coating wears away gradually as the boat moves through the water.
minimizes bottom paint build up so you have less sanding to do next season.
durable finish can be burnished for smoothness, speed & fuel efficiency.
LOW ODOR, LOW VOCs, EASY CLEANUP: This low-VOC, water-based marine paint has no toxic fumes, and cleans up easily with soap and water.
ideal for use in marinas and boat yards with environmental restrictions.
EASY TO APPLY BY BRUSH, ROLLER OR SPRAY: Brush - natural bristle.
Roller - 3/16” nap or foam solvent-safe cover.
AVAILABLE IN BLACK, BLUE, GREEN & RED COLORS in Quart and Gallon sizes.
Coverage: 500 sq. ft. per gallon. Compatible with most previously applied bottom paints: Apply over existing ablative or hard bottom paints.
for use on boat bottoms & hulls below waterline only.

Check Stock

DURALUX Camouflage Paint - Duckboat Drab, 1 Gallon, Camouflage Marine Paint for Boats, ATVs, Hunting Blinds & More, Adheres to Steel, Metal, Wood, Fiberglass & Aluminum

CAMOUFLAGE MARINE PAINT: Get a long-lasting, ultra-low luster finish on your boat, tree stand or hunting blind with Duralux Duckboat Drab Camouflage Paint..
LONG-LASTING FINISH: This structure and boat paint stands up to saltwater, oil, gasoline, and the discoloration effects of harbor gasses for a long-lasting finish..
FOR A VARIETY OF APPLICATIONS: This oil alkyd-based camo paint adheres to steel, metal, wood, aluminum and fiberglass. It's perfect for boats, tree stands, hunting blinds, ATVs and trailers..
EASY TO USE: Apply 2 thin coats of Duralux Marine Paint on a prepared surface with a brush, roller, or airless sprayer. Do not paint in direct sunlight and allow each coat to dry overnight. Packaged in a 1-gallon container..
FOR ON-SHORE AND OFF-SHORE APPLICATIONS Duralux Marine Coatings offers a complete line of high-performance enamels, spar varnish and other coatings in a variety of colors..

Check Stock

Duralux Camouflage Paint - Duckboat Drab, 1 Quart, Camouflage Marine Paint for Boats, ATVs, Hunting Blinds & More, Adheres to Steel, Metal, Wood, Fiberglass & Aluminum

CAMOUFLAGE MARINE PAINT: Get a long-lasting, ultra-low luster finish on your boat, tree stand or hunting blind with Duralux Duckboat Drab Camouflage Paint..
LONG-LASTING FINISH: This structure and boat paint stands up to saltwater, oil, gasoline, and the discoloration effects of harbor gasses for a long-lasting finish..
FOR A VARIETY OF APPLICATIONS: This oil alkyd-based camo paint adheres to steel, metal, wood, aluminum and fiberglass. It's perfect for boats, tree stands, hunting blinds, ATVs and trailers..
EASY TO USE: Apply 2 thin coats of Duralux Marine Paint on a prepared surface with a brush, roller, or airless sprayer. Do not paint in direct sunlight and allow each coat to dry overnight. Packaged in a 1-quart container..
FOR ON-SHORE AND OFF-SHORE APPLICATIONS Duralux Marine Coatings offers a complete line of high-performance enamels, spar varnish and other coatings in a variety of colors..

Check Stock

How To Paint Your Fiberglass Boat

ANTIFOULING PAINT FOR BOATS: Unique hybrid paint film keeps barnacles, weeds and slime from clinging to the bottom of your power boat or sailboat for a full season.
ideal for fiberglass, wood and steel boats in salt water and fresh water.
ABLATIVE BOTTOM PAINT: Self-polishing coating wears away gradually as the boat moves through the water.
minimizes bottom paint build up so you have less sanding to do next season.
durable finish can be burnished for smoothness, speed & fuel efficiency.
LOW ODOR, LOW VOCs, EASY CLEANUP: This low-VOC, water-based marine paint has no toxic fumes, and cleans up easily with soap and water.
ideal for use in marinas and boat yards with environmental restrictions.
EASY TO APPLY BY BRUSH, ROLLER OR SPRAY: Brush - natural bristle.
Roller - 3/16” nap or foam solvent-safe cover.
AVAILABLE IN BLACK, BLUE, GREEN & RED COLORS in Quart and Gallon sizes.
Coverage: 500 sq. ft. per gallon. Compati....

Check Stock

Louie's Backyard Cookbook: Irrisistible Island Dishes and the Best Ocean View in Key West (Roadfood Cookbook)

ONE-PART MARINE PRIMER FOR BOATS provides a durable, flexible undercoat for 1-part and 2-part polyurethane and enamel marine topside paint.
for use above the waterline on fiberglass, wood, gelcoat and previously painted surfaces in good condition.
COVERS COMPLETELY IN JUST ONE COAT: High-solids primer seals the surface with 1 thin coat.
apply a second coat only if a higher build is needed.
to fill large surface imperfections use TotalBoat TotalFair epoxy fairing compound before applying Topside Primer.
EASY TO APPLY BY BRUSHING, ROLLING OR SPRAYING: Use a natural bristle paint brush, a 1/8 " solvent-safe foam roller, or to spray, use a 1.1mm tip.
boat primer is chromate-free and lead-free.
DRIES FAST, CURES TO A SMOOTH, HARD FINISH: Ready to sand in 60-90 minutes at 65°F.
marine paint primer is easy to sand, then just wipe clean and apply a topside finish such as TotalBoat Wet Edge or TotalTread marine non-skid deck paint.
AVAILABLE IN WHITE AND GRAY IN QUART AND GALLON SIZES. Brush/roller application - thin with TotalBoat Special Brushing Thinner 100.
do not apply Topside Primer thicker than recommended or it may not cure properly.

Check Stock

DURALUX Marine Enamel, White, 1 Gallon, Topside Paint for Boats and Other Onshore or Offshore Marine Maintenance Applications, Adheres to Steel, Metal, Wood, Fiberglass & Aluminum

ENAMEL MARINE PAINT: Get a long-lasting, elegant white finish on your boat, bridge, or other marine structure with Duralux Marine Enamel..
LONG-LASTING FINISH: This marine structure and boat paint stands up to salt water, oil, gasoline, repeated washings and the discoloration effects of harbor gasses for a long-lasting finish..
FOR A VARIETY OF MARINE APPLICATIONS: This single-component topside enamel adheres to primed steel, metal, wood, aluminum and fiberglass – making it ideal for commercial or pleasure boats, offshore oil rigs, bridges, tanks and other structures..

Check Stock

DURALUX Marine Enamel, Cruiser Blue, 1 Gallon, Topside Paint for Boats and Other Onshore or Offshore Marine Maintenance Applications, Adheres to Steel, Metal, Wood, Fiberglass & Aluminum

ENAMEL MARINE PAINT: Get a long-lasting, elegant cruiser blue finish on your boat, bridge, or other marine structure with Duralux Marine Enamel..
LONG-LASTING FINISH: This marine structure and boat paint stands up to salt water, oil, gasoline, repeated washings and the discoloration effects of harbor gasses for a long-lasting finish..
FOR A VARIETY OF MARINE APPLICATIONS: This single-component topside enamel adheres to primed steel, metal, wood, aluminum and fiberglass – making it ideal for commercial or pleasure boats, offshore oil rigs, bridges, tanks and other structures..

Check Stock

Davis Fsr Fiberglass Stain Remover - 16oz

⚓ Strong Marine FSR FIBERGLASS STAIN REMOVER for Removing Rust, Oil, Boat Exhaust And Waterline Stains From Boats, Stainless Steel And Concrete. Ideal Hull Cleaner For Boats, works on Fiberglass Boats and as a Fiberglass Restorer..
STAIN ABSORBING and great for removing Rust from Stainless Steel and Deck or Hull areas. Ideal Boat Rust Stain Remover, Fiberglass Cleaner for Boats, Rust Remover for Fiberglass, Rust Stain Remover for Concrete & Rust Stain Remover for Clothes..
REMOVES RUST STAINS from SAIL CLOTH, CLOTHING, FABRICS AND CONCRETE. Works as Concrete Rust Stain Remover, Fabric Rust Remover, Hull, Stainless Steel Cleaner for Boats, Rust Remover Concrete, Rust Remover for & Boat Cleaner Fiberglass Hull Fabric.
NO SANDING or compounding needed, Remove Rust Stains easily. Ideal Gift for Boaters or Gifts for Boat Owners as works a Fiberglass Boat Restoration and Boat Stain Remover. Ideal Rust Remover for Boats, Boat Fiberglass Cleaner & Boat Hull Cleaner for Fiberglass.
RUST AND STAIN REMOVER IS EASY TO USE: Apply with cloth, sponge or brush. Allow to sit for several minutes. Then wipe off or remove with water. Ideal Fiberglass Boat Cleaner, Rust Cleaner, Rust Remover Steel, Rust Remover Clothes. Gifts for Boaters.

Check Stock