Best Fe cr al Resistance Wire

TEMCo Kanthal Wire 28 Gauge - 100 FT 0.61 oz Series A-1 Resistance AWG

  • 28 AWG, Average wire diameter: 0.0126 in. (0.32004 mm), 5.27 Ohms/ft at 68°F.
  • ALLOY: Kanthal A-1 (22% Cr, 5.8% Al, Fe balance). Rated for temperatures up to 1400°C (2550°F)..
  • 100% MADE IN THE U.S.A. All TEMCo wire is produced and spooled right here in the U.S.A..
  • PERFECTLY TENSIONED. Zero elongation, scratches or other flaws ensure quality wire on every spool..
  • ZERO CONTAMINANTS. Clean production environment houses the spooling process. Hands-off computerized spooling eliminates skin salts and oils..
Check Stock

TEMCo Kanthal A1 wire 16 Gauge 1.5 lb 238 ft Resistance AWG A-1 ga

  • 16 AWG, Average wire diameter: 0.0508 in. (1.29032 mm), 0.324 Ohms/ft at 68°F.
  • ALLOY: Kanthal A-1 (22% Cr, 5.8% Al, Fe balance). Rated for temperatures up to 1400°C (2550°F)..
  • 100% MADE IN THE U.S.A. All TEMCo wire is produced and spooled right here in the U.S.A..
  • PERFECTLY TENSIONED. Zero elongation, scratches or other flaws ensure quality wire on every spool..
  • ZERO CONTAMINANTS. Clean production environment houses the spooling process. Hands-off computerized spooling eliminates skin salts and oils..
Check Stock

Fielect Heating Element Coil Wire 220V 3000W Resistance Wire Furnace Heater Wire FeCrAl Silver Heat-resistant Wire Length 800mm,3Pcs

  • 【Parameters】 - Size(approx):Inner diameter:1.2mm/0.05".
  • 【Material】 - The heating element is made of FeCrAl heating alloy, high temperature resistance, corrosion resistance, high quality, and safety.
  • 【Advantage】 - The kiln element has good performance, good thermal efficiency, uniform heating, safe use and long service life.
  • 【Application】 - Heating element coils have a wide range of uses, such as small electric furnaces, muffle furnaces, electric heating tubes, and household appliances.
  • 【Noted】 -Please stretch the heating element coil before connecting the power supply, otherwise it will burn and cause damage.
Check Stock

Fielect Heating Element Coil Wire 220V 4000W Resistance Wire Furnace Heater Wire FeCrAl Silver Heat-resistant Wire Length 1000mm,1Pcs

  • 【Parameters】 - Size(approx):Inner diameter:1.3mm/0.05".
  • 【Material】 - The heating element is made of FeCrAl heating alloy, high temperature resistance, corrosion resistance, high quality, and safety.
  • 【Advantage】 - The kiln element has good performance, good thermal efficiency, uniform heating, safe use and long service life.
  • 【Application】 - Heating element coils have a wide range of uses, such as small electric furnaces, muffle furnaces, electric heating tubes, and household appliances.
  • 【Noted】 -Please stretch the heating element coil before connecting the power supply, otherwise it will burn and cause damage.
Check Stock

WIREOPTIM - 16 AWG - Kanthal A1 Resistance Wire - 100 Feet

  • Kanthal A-1 (22% Cr, 5.8% Al, Fe balance).
  • Rated for temperatures up to 1400°C (2550°F).
  • Magnetic properties: Magnetic up to approximately 600°C (Curie point)..
Check Stock

WIREOPTIM Kanthal A1 Resistance Wire 28 AWG - 100 Feet

  • Kanthal A-1 (22% Cr, 5.8% Al, Fe balance).
  • Rated for temperatures up to 1400°C (2550°F).
  • Magnetic properties: Magnetic up to approximately 600°C (Curie point)..
Check Stock

WIREOPTIM Kanthal A1 Resistance Wire 28 AWG - 250 Feet

  • Kanthal A-1 (22% Cr, 5.8% Al, Fe balance).
  • Rated for temperatures up to 1400°C (2550°F).
  • Magnetic properties: Magnetic up to approximately 600°C (Curie point)..
Check Stock

WIREOPTIM Kanthal A1 Resistance Wire 28 AWG - 25 Feet

  • Kanthal A-1 (22% Cr, 5.8% Al, Fe balance).
  • Rated for temperatures up to 1400°C (2550°F).
  • Magnetic properties: Magnetic up to approximately 600°C (Curie point)..
Check Stock

TEMCo Nichrome 60 series wire 18 Gauge 50 Ft Resistance AWG ga

  • 18 AWG, Average wire diameter: 0.04 in. (1.016 mm), 0.4219 Ohms/ft at 68°F.
  • ALLOY: Nichrome 60 (60% Ni, 16% Cr, 24% Fe). Rated for temperatures up to 1150°C (2100°F)..
  • 100% MADE IN THE U.S.A. All TEMCo wire is produced and spooled right here in the U.S.A..
  • PERFECTLY TENSIONED. Zero elongation, scratches or other flaws ensure quality wire on every spool..
  • ZERO CONTAMINANTS. Clean production environment houses the spooling process. Hands-off computerized spooling eliminates skin salts and oils..
Check Stock