Best Fe cr al Alloys

TEMCo Kanthal A1 wire 28 Gauge 1000 Ft Resistance AWG A-1 ga

28 AWG, Average wire diameter: 0.0126 in. (0.32004 mm), 5.27 Ohms/ft at 68°F.
ALLOY: Kanthal A-1 (22% Cr, 5.8% Al, Fe balance). Rated for temperatures up to 1400°C (2550°F)..
100% MADE IN THE U.S.A. All TEMCo wire is produced and spooled right here in the U.S.A..
PERFECTLY TENSIONED. Zero elongation, scratches or other flaws ensure quality wire on every spool..
ZERO CONTAMINANTS. Clean production environment houses the spooling process. Hands-off computerized spooling eliminates skin salts and oils..

...good flow during welding and can flow into narrow gaps. The welding effect is completely flat..
【Material】The low temperature aluminum welding rods. The composition of the solder: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%. for welding aluminum, aluminum alloys, aluminum-magnesium alloys and other white metals with high strength, good forgeability..
【Wide Application】Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
【Quality Service】 When you encounter problems in the process of using the aluminum brazing rod, please contact us immediately, we will solve all problems for you. Looking forward to your suggestions for welding rods, we will continue to improve our products and serve you better..

16 AWG, Average wire diameter: 0.0508 in. (1.29032 mm), 0.324 Ohms/ft at 68°F.
ALLOY: Kanthal A-1 (22% Cr, 5.8% Al, Fe balance). Rated for temperatures up to 1400°C (2550°F)..
100% MADE IN THE U.S.A. All TEMCo wire is produced and spooled right here in the U.S.A..
PERFECTLY TENSIONED. Zero elongation, scratches or other flaws ensure quality wire on every spool..
ZERO CONTAMINANTS. Clean production environment houses the spooling process. Hands-off computerized spooling eliminates skin salts and oils..

18 AWG, Average wire diameter: 0.0403 in. (1.02362 mm), 0.515 Ohms/ft at 68°F.
ALLOY: Kanthal A-1 (22% Cr, 5.8% Al, Fe balance). Rated for temperatures up to 1400°C (2550°F)..
100% MADE IN THE U.S.A. All TEMCo wire is produced and spooled right here in the U.S.A..
PERFECTLY TENSIONED. Zero elongation, scratches or other flaws ensure quality wire on every spool..
ZERO CONTAMINANTS. Clean production environment houses the spooling process. Hands-off computerized spooling eliminates skin salts and oils..

16 AWG, Average wire diameter: 0.0508 in. (1.29032 mm), 0.324 Ohms/ft at 68°F.
ALLOY: Kanthal A-1 (22% Cr, 5.8% Al, Fe balance). Rated for temperatures up to 1400°C (2550°F)..
100% MADE IN THE U.S.A. All TEMCo wire is produced and spooled right here in the U.S.A..
PERFECTLY TENSIONED. Zero elongation, scratches or other flaws ensure quality wire on every spool..
ZERO CONTAMINANTS. Clean production environment houses the spooling process. Hands-off computerized spooling eliminates skin salts and oils..

18 AWG, Average wire diameter: 0.0403 in. (1.02362 mm), 0.515 Ohms/ft at 68°F.
ALLOY: Kanthal A-1 (22% Cr, 5.8% Al, Fe balance). Rated for temperatures up to 1400°C (2550°F)..
100% MADE IN THE U.S.A. All TEMCo wire is produced and spooled right here in the U.S.A..
PERFECTLY TENSIONED. Zero elongation, scratches or other flaws ensure quality wire on every spool..
ZERO CONTAMINANTS. Clean production environment houses the spooling process. Hands-off computerized spooling eliminates skin salts and oils..

28 AWG, Average wire diameter: 0.0126 in. (0.32004 mm), 5.27 Ohms/ft at 68°F.
ALLOY: Kanthal A-1 (22% Cr, 5.8% Al, Fe balance). Rated for temperatures up to 1400°C (2550°F)..
100% MADE IN THE U.S.A. All TEMCo wire is produced and spooled right here in the U.S.A..
PERFECTLY TENSIONED. Zero elongation, scratches or other flaws ensure quality wire on every spool..
ZERO CONTAMINANTS. Clean production environment houses the spooling process. Hands-off computerized spooling eliminates skin salts and oils..

16 AWG, Average wire diameter: 0.0508 in. (1.29032 mm), 0.324 Ohms/ft at 68°F.
ALLOY: Kanthal A-1 (22% Cr, 5.8% Al, Fe balance). Rated for temperatures up to 1400°C (2550°F)..
100% MADE IN THE U.S.A. All TEMCo wire is produced and spooled right here in the U.S.A..
PERFECTLY TENSIONED. Zero elongation, scratches or other flaws ensure quality wire on every spool..
ZERO CONTAMINANTS. Clean production environment houses the spooling process. Hands-off computerized spooling eliminates skin salts and oils..

【Parameters】 - Size(approx):Inner diameter:1.2mm/0.05".
【Material】 - The heating element is made of FeCrAl heating alloy, high temperature resistance, corrosion resistance, high quality, and safety.
【Advantage】 - The kiln element has good performance, good thermal efficiency, uniform heating, safe use and long service life.
【Application】 - Heating element coils have a wide range of uses, such as small electric furnaces, muffle furnaces, electric heating tubes, and household appliances.
【Noted】 -Please stretch the heating element coil before connecting the power supply, otherwise it will burn and cause damage.