Best Brazing Alloys Powder

Bernzomatic PC3 Copper-Phosphorous Brazing/Welding Rods, 3-Piece

Copper-phosphorous brazing/welding rods ideal for use in refrigeration, electrical and plumbing jobs.
Working temp: 1,310-1,475-Degree farenheit.
Joins copper to copper without flux, or copper to copper alloys (brass, and bronze).

LFB (bare low fuming bronze) is a general purpose oxyacetylene/brazing rod used for joining various ferrous and non-ferrous metals such as carbon steel, copper alloys, cast iron, malleable iron, stainless steel and some nickel alloys. Mechanical and physical characteristics include ductility, machineability, high strength, free flowing with good tinning action and a low melting point (1630°F).
A “must have” filler metal for every machine shop, LFB is excellent for building up wearing surfaces or large areas where successive layers must be added.
galvanized parts can be brazed without damaging the zinc coating. Precise balance of copper and zinc along with alloying elements of tin, iron, manganese and silicon produces weld deposits that can be easily machined but work harden once put into service.
READ THIS: Main image is for reference only. Please check Picture #2 for an approximate quantity of rods per pound***.
Available in different sizes: 0.045", 1/6", 3/32", 1/8", 5/32", 3/16" and 1/4".
Available in different package weights: 1 Lb, 2 Lb, 5 Lb and 10 Lb.

For all types of steel, malleable and cast iron, galvanized metals, brass, and bronze.
This flux is used for flame brazing with either an oxy-acetylene or electric carbon arc torch.
Active Temperature Range: 1400 to 2200 F (760 to 1205 C).
Meets AWS A5.31-91 Type FB3J Standards as well as MIL-F-16136B, Types A and B Standards.
Brazing Flux Powder comes in 8-Ounce container, Made in the USA.

Professional contractor grade portable oxyacetylene welding and brazing outfit-tanks not included (sold separately).
Cap'n hook five flame tip for brazing up to 1" copper tubing-u's Patent no. 4,191,333.
Welding/brazing tip for brazing up to 1" copper tubing and welding up to 1/8" steel.
Centurion series regulators with Protective rubber gauge boots.
Front valve welding handle with stainless steel ball point valves for accurate Gas control.

【No Flux Needed】No additional flux is needed. BLUEFIRE brazing coil can be used directly with propane torch, which will save you a lot of money on extra flux.In addition, the coil design of brazing rods is more convenient to carry than the rod design, you can use the brazing rods coil in your pocket for repair work anywhere and whenever it's needed. A great and thoughtful design!.
【Universal Magic Alloy】BLUEFIRE flux cored welding coil is mainly made of zinc aluminum alloy,which can be used for brazing copper and aluminum, aluminum and aluminum, aluminum and stainless steel, aluminum and steel, etc.More specificly,BLUEFIRE flux cored welding coil can be used for brazing transformer,reactor,condenser, evaporator, radiator,motor, battery or other household appliances.You can use it to complete most of the brazing work in life..
【Easy to Melt and Flow】BLUEFIRE flux cored brazing rods coil can melt at 752°F and have very good fluidity with good capillary attraction.In addition, BLUEFIRE flux cored welding wire is not only corrosion-resistant, but also is post-braze cleaning unnecessary. It's characteristics of high thermal conductivity and high conductivity make the welding effect full and smooth.It fits both professionals and amateurs..

Super Sil-Flo brazing rod is a brazing alloy that is ideal for large and small copper tubing installations.
Typical applications are refrigeration control valves, joining copper wires to rotor bars, electrical connections.
T joints, wage joints and sleeves, couplings on return bends and condenser fitting.
Sil-flo is not recommended for ferrous metals such as iron or steel.

NO SOLDER POWDER NEEDED: These aluminum rods are flux cored welding rods, no need solder powder, no other materials are required, and it is easy to....
HIGH QUALITY MATERIAL: The low temperature aluminum brazing rods with flux are made of aluminum material, nontoxic, odorless and durable material..
PERFECT WELDING EFFECT: These aluminum welding rods has great welding effect, with low melting point, great weldability and corrosion resistance, high....
WIDELY USE: The easy melt aluminum welding sticks are suitable for welding or surfacing welding aluminum, aluminum alloy, aluminum-magnesium alloy and....
AFTER-SALES SERVICE: For any reason, if you are not satisfied with your purchase, contact us directly and we will solve it for you immediately..