Best Epoxy For Aluminum 2

Fasco Epoxies 9XN Steelflex Neutral Quart Kit

  • Epoxy solvent free coating for Steel-Aluminum-Fiberglass-Concrete-Wood-Styrofoam.
  • Strong Abrasion and Impact Resistant Epoxy Coating Perfect for stopping leaky rivets in aluminium boats.
  • A quart does approximately 30 square feet.
  • Coating for pretty much any surface except plastic.
  • Fasco Has been Manufacturing Epoxy compounds and coatings since 1957 Made in the USA.
Check Stock

Leweio Gunite Spiked Shoes -Metal Plate Spiked Screeding Shoes with 3/4” Short Spikes Perfect For Epoxy Floor

  • ... nails can maintain balance when walking on epoxy/concrete/painting,and gunite other materials, while protecting these materials from footprints..
  • STURDY METAL PLATE+INNOVATIVE NUT LOCK DESIGN - Most sellers spike shoes use plastic base, it easy broken and Nuts fall off easily . Leweio gunite spike shoes are made of aluminum alloy plate &Innovative nut lock design, which is sturdy and durable. No worry about the risk of sole fracture and spikes loose . top use soft leather Touch Fasteners + laces design, leather part can wrap your shoes very tightly, Double insurance for shoelaces and Touch Fasteners..
  • ONE SIZE FIT ALL - The Epoxy spike shoes are composed of unbreakable black soft leather with a 11.8*5.1 inch aluminum alloy base plate+26 anti-corrosive steel nails.The laces that hold the spikes onto the bottom of your foot can be adjusted to fit over regular shoes, sneakers, or work boots..
  • 100% FULLY ASSEMABLE - When you unpack the concrete spike shoes package, you will find that the 13pcs 3/4inch nails on each shoe have been assembled. (each sandal has 13 heavy duty steel anti-corrosive and durable spikes.) You only need to tie your shoelaces and you can use them directly. Epoxy spike shoe also come with a free small wrench. Easy to install and remove....
Check Stock

Total Boat High Performance Epoxy Resin (Gallon)

  • Part 1 of a two-part, low-viscosity epoxy resin system that’s easy to use for clear coating, laminating, layups, and vacuum bagging. For use with non-blushing TotalBoat 2:1 Slow, Medium, and Fast Hardeners for curing in a wide range of times and temperatures..
  • Non-blushing formula means no time spent removing messy surface blush so projects can be finished faster. Low odor and low VOCs make it great for shop or indoor use..
  • Simple mix ratio of 2 parts resin to 1 part hardener makes it easy to get a proper cure every time, especially using TotalBoat 2:1 Pumps (sold separately)..
  • Use on properly prepared wood, fiberglass, aluminum, and steel. Clear, hard, flexible cure is great for clear coating and wooden boat building. Blend mixed epoxy resin with fillers to create a strong adhesive, fairing compound, or filleting compound..
  • Available in Quart, Gallon, and 4-Gallon sizes..
Check Stock

J-B Weld 43032 UltraRez UV Resistant Resin, Epoxy Resin, Art Resin, Crystal Clear Non- Yellowing, 32 fl. Oz. Kit, Clear

  • ★ QUICK SET EPOXY: A 2-part epoxy resin system with accelerated drying properties. This fast set epoxy is ideal for anyone requiring a wood or concrete epoxy resin sealer with a shorter working time, drying time, and curing time.
  • ★ QUICK 2-3 HR EPOXY CURE: Considered the BEST 2-3 hour fast drying epoxy on the market. Apply to river tables, live edge wood slabs, epoxy countertops, and epoxy bar tops to prevent air bubbles.
  • ★ FILL CRACKS FAST: Pour epoxy into river table cracks and voids to quickly seal and fill. Use this quick drying resin as clear cast epoxy or excellent for colored cracks and veins in wood or concrete - 12-15 minute pot-life.
  • ★ COLOR CRACKS & VOIDS: Tint with epoxy resin mica powders, epoxy alcohol inks or liquid epoxy pigments to make beautiful epoxy accents to enhance a deep pour wood river table or countertop.
  • ★ MADE IN THE USA: We are the manufacturer and understand epoxy! Quick Set Seal epoxy has 100% Solids, Low Odor, Zero VOC, Quick Curing 1:1 Mix Ratio, 1 Quart 2 Part Epoxy Resin Kit.
Check Stock

AQUASEAL 2 Quart Marine Epoxy Resin Kit | Fast Set Clear Epoxy Resin | Bar Top, Countertop, Table Top Epoxy Resin | 2-Part Combined Casting Resin Epoxy Kit Includes Cups, Spreader, Stirrer & Gloves

  • Premium deep pour epoxy resin kit - Our resin kits deliver extra durable results ideal for boat building, composite construction, house repairs, table top epoxy resin projects and more!.
  • All supplies you need included - This clear epoxy resin kit includes 1 bottle of epoxy resin 1 quart, 1 bottle of hardener 1 quart, 2x measuring cups, 2x plastic spreaders and 2x plastic stirrers..
  • Easy to use - Mix 1 part epoxy resin and 1 part hardener for 20 minutes of work time on your marine epoxy projects. Use on wood, fiberglass, reinforcement fabrics, etched aluminum, and more..
  • Top quality marine epoxy resin - Crystal clear and non-yellowing formula that's anti-smudge, anti-glare, UV resistant, and withstands chemicals, corrosion, rust, salts, and water damage. Perfect for boat building and repair projects..
  • Extra hard results - This resin epoxy kit delivers durable, rock hard results at a fraction of the time. Watch your projects come to life faster with no compromise on quality..
Check Stock

TotalBoat Crystal Clear Epoxy Kits (Gallon)

  • PREMIUM EPOXY KITS include enough 5:1 marine epoxy resin and hardener to complete a variety of boat building, composite construction, and epoxy repair projects. For use on wood, fiberglass, reinforcement fabrics, etched aluminum, bare steel, and lead. Not suitable for clear-coating applications.
  • IDEAL VISCOSITY for wetting out fiberglass cloth and other reinforcement fabrics. Self-leveling properties are ideal for coating and laminating. Combine with fillers to make a high-strength fairing compound, filleting material, or adhesive.
  • CHOOSE FAST OR SLOW HARDENER: Pot life ranges from 12 minutes @ 75°F for Fast Hardener, to 20 minutes @ 75°F for Slow Hardener.
  • CHOOSE FROM THREE EPOXY KIT SIZES: Quart, Gallon, and 4.5 Gallon, with your choice of TotalBoat 5:1 Fast or Slow Hardener. Kits include resin, hardener, calibrated pumps, mixing sticks and mixing cups. Compatible with other 5:1 epoxy resin systems.
  • PUMPS INCLUDED: Metered resin and hardener pumps provide the exact 5 parts resin to 1 part hardener ratio for a proper cure every time. Easy-to-use pumps are calibrated so all you d....
Check Stock

Wisebond Deep Pour Epoxy Resin is Super Clear Epoxy for River Tables and Casting with Super High UV resistance and looks like smooth liquid glass. 2:1 Ratio 1.5-Gal Kit, Amazing Clear Cast Epoxy Resin

  • ★ RIVER TABLE EPOXY: Deep Pour Epoxy for thick 2”+ single epoxy river pouring or epoxy clear casting that offers a super clear epoxy.
  • ★ 2”+ THICK SINGLE POURS: Considered the Best DEEP POUR Epoxy for river tables, live edge wood slabs, epoxy countertops, epoxy bar tops and super clear epoxy object casting.
  • ★ CLEAR OR TINTED: Pour epoxy river tables, fill voids & cracks as a clear cast resin or excellent for colored epoxy resin wood or concrete. Tint with epoxy mica powders, epoxy alcohol inks or liquid epoxy pigments.
  • ★ HIGHEST UV INHIBITORS: Our WiseBond Deep Pour Epoxy has the highest UV yellowing resistance and UV inhibitor protection on the market.
  • ★ MADE IN THE USA: We are the manufacturer and understand epoxy! Deep Pour epoxy has 100% Solids, Low Odor, Zero VOC, Quick Curing 2:1 Mix Ratio, 1.5 Gallon 2 Part Kit.
Check Stock

3M Panel Bonding Adhesive, 38315, 50 mL Cartridge

  • Two-part epoxy used to bond steel, aluminum, SMC, and FRP (traditional fiberglass).
  • A high performance two component epoxy adhesive..
  • Bonds a variety of steel, aluminum, SMC, and FRP (traditional fiberglass) non-structural components..
  • Also use to reinforce welded or riveted structural components..
  • Use with 08190 Performance Manual Applicator and 38191 Static Mixing Nozzle. The Net Fill amount is 47.5mL. Cartridge Volume is 50mL.
Check Stock

White Epoxy Undercoat – Epoxy Paint and Primer Mix for Coating MDF, Plywood, and Porous Materials! Great for DIY Countertop Epoxy Kits! 1 Quart, 32 Fl Oz (Stone Coat Countertops)

  • Custom Shop – KEP Series Anti-Corrosive Epoxy Primer / Sealer is a 1 to 1 Mix Ratio high performance primer specifically designed to be used  DTM (Direct to Metal).  KEP Series Primer contains an advanced resin technology system that offers superior adhesion to Bare Metal, Steel, Bare Aluminum, Fiberglass, Gelcoat. Body Fillers and most properly prepared Rigid Plastics and sanded OEM Finishes..
  • KEP Epoxy Primer is Lead and Chromate Free and its formulation contains a rich blend of Anti-Corrosive additives to achieve maximum defense against rust and corrosion. It also offers excellent salt spray resistance and is a fast dry product..
  • Custom Shop – KEP Series Epoxy Primer is great as a DTM primer but also can be used as an excellent sealer for all single stage Urethane and Basecoat Clearcoat.  If used as a sealer add 1/2 part of XR70 or UR70 reducer, topcoat or basecoat can be applied in 30 minutes. Using KEP allows for excellent topcoat gloss holdout..
  • Available in Gray, Black and White in 1 quart kits, 2 quart kits, gallon kits and 2 gallon kits. Great for Automotive and Industrial applications. KEP is compatible with and can be top coated with most Automotive Paint brands like Custom Shop, Restoration Shop, PPG, House of Kolor, Valspar, etc..
Check Stock