Best Electrostatic Voltage Meter

Power Supply AC Adapter OEM Replacement for Xbox One S Slim Model NP15-120P1A PA-1131-13MX

  • The 117 multimeter measures AC and DC voltage as well as AC and DC amps. The 323 clamp meter measures AC and DC voltage as well as AC amps.
  • The 117 multimeter features true RMS for accurate measurements on non-linear loads.
  • The 117 multimeter features low input impedance which helps prevent false readings due to ghost voltage.
  • The 323 clamp meter provides a true RMS AC voltage and current for accurate measurements on non linear signals.
  • The 323 clamp meter measures 400 A AC current and 600 VAC and DC voltage.
Check Stock

Securitron AQU126 Power Supply, 6 Ampere/12V DC

  • 300W high voltage power supply with single output, you can use it to generate the high voltage output..
  • Application: High voltage electric field, clean air, clean smoke, electrostatic air cleaner etc..
  • This high voltage power supply has shortcut protection and preventing spark-over protection..
Check Stock

CAMWAY Portable Clamp Meter Digital 6000 Counts AC/DC Current TRMS AMP OHM Tester Capacitance Multimeter with Alligator Clips

  • 【Auto/Manual Ranging & NCV】 The 6000counts Meter Automatically Select Appropriate Decimal Point Place.
  • NCV Detects Existence of AC voltage on....
  • 【Clamp Measuring】 Clamp Jaw up to 28mm, Clamp Meter Measures AC Current without Interrupting Circuit, Makes it Much Safer to Use on Mains Cables....
  • 【True RMS Multi-purpose Clamp Meter】 AC/DC Current, Accurate AC/DC Voltage , Frequency, Duty Cycle, Diode, Temperature Test,Capacitance and....
  • 【Continuity Test & Overload Protection Display】 Low Voltage Indication & Overload Protection Designed , Safely Accurately Confirm the Circuit....
  • 【Convenient to Use】 Meter size 210×110×45mm Portable . High Resolution , Low Battery Display. Large Backlit LCD Screen Improves Visibility.....
Check Stock

Voltage Amp Meter DC DROK Battery Monitor DC 0-300V 200A Ammeter Voltmeter for Solar System Setup Power Energy Capacity Volt Current Detector Panel with Hall Sensor

  • Multifunctional Meter: DROK multimeter panel is available to measure percentage and AH of remaining capacity, DC positive and negative bidirectional....
  • Hall Sensor & Easy Mount: the voltage amperage meter is coming with a Hall transformer to for isolated measurement, reliable and safe.
  • Display: backlight can be controlled to be ON or OFF as user’s need.
  • Equipped with full angle of view LCD screen, users could see the display....
  • Alarming Function: it will alarm and flash to draw your attention when the real voltage is higher or lower than preset alarming voltage and real....
  • Wide Applications: Can be used as dc amp meter, digital volt meter, power meter, battery capacity monitor. Suitable for all kinds of batteries, such....
Check Stock

Milwaukee 2235-20 400 Amp Clamp Meter

  • 400A MAX AC/DC CURRENT RANGE: Reads both AC and DC current. With 9 functions it’s the perfect meter for the professional electrician.
  • MORE ACCURATE: Equipped with true RMS accuracy this clamp meter won’t leave you guessing weather your readings are correct.
  • HIGH SAFETY RATING: Feel safe on the job knowing Southwire’s clamp meter is CAT III 600V safety rated.
  • BUILT-IN NON-CONTACT VOLTAGE DETECTOR: Helps identify where live voltage may be present before working on electrical installations or troubleshooting.
  • CONVENIENT THIRD-HAND TEST PROBE HOLDER: The clip on the back of the clamp meter allows you to hold a test lead in one hand and the meter and the other test lead in your other hand making the testing process easier.
  • BUILT IN WORK LIGHT: The built-in work light is an extra convenience feature that allows visibility even in dimly lit areas.
  • WHAT’S INCLUDED: Carrying case, clamp meter, test leads, type K temperature probe with banana plug adapter, AAA batteries and instruction manual.
Check Stock

KETOTEK Digital AC Voltmeter Panel Mounting Meter AC80-300V Frequency Counter 45.0-65.0 HZ LED Display Voltage Volt Frequency Meter Tester Gauge

  • 【2 in 1 Multimeter】Voltage and frequency can be displayed with different color on the LED screen, red for voltage, green for frequency. It is clear and convenient to read..
  • 【Wide measuring range】Voltage: AC 80~300V, Hertz: 45-65Hz, Accuracy: 1% ± 2 digits, with high working efficiency of 2 times/s measuring speed..
  • 【No extra individual power supply】It can directly connect two wires to the tested voltage to measure voltage and frequency without power supply..
  • 【Ultra small size】2.68×1.65×1.5inch / 68x42x38mm. This Voltage Frequency Meter can be installed on anywhere flexibly..
  • 【More information】Operating temperature: 10°F~122°F/-10℃ ~ 50℃. Note: The AC current meter only suits for pure AC 50-60HZ power supply and can NOT be used for square wave, inverter output and sine wave circuit measurement of modified sine wave, otherwise the meter will be damaged..
Check Stock

2 Pieces DC 5-48V Car LED Display Voltmeter Waterproof Digital Voltage Gauge Meter with Touch Switch for Boat Marine Vehicle Motorcycle Truck ATV UTV Blue Light

  • What you will get: there are 2 pieces of car digital display voltage gauge and 4 pieces of insulating terminals and screws in one package in total,....
  • Large display: the LED digital voltage meter has a big screen, so you can see the numbers clearly from the digital voltage meter screen.
  • How to use: the round voltage display meter has a simple operation.
  • You need to pick a suitable spot in your car, and use a tool to open a 29 mm/ 1.14....
  • Quality material: this waterproof digital voltage tester is mainly made of fire retardant PC material, which has fireproof, waterproof,....
  • Waterproof function: this LED display voltmeter has a waterproof function, it is not easily eroded by water, so you can use it for voltage tests....
Check Stock

AD8317 1M-10GHz 60dB RF Power Meter Logarithmic RF Signal Power Detector Controller for Amplifier

  • ...iciency, easy to install, stable and reliable, and is used for radio frequency signal power detection..
  • DETECTABLE :The logarithmic power meter has strict quality control and quality assurance. It can detect the power of the radio frequency signal from -55dBm to 0dBm, and convert the radio frequency signal into a DC voltage output..
  • DYNAMIC RANGE :The greater the amplitude or power of the radio frequency signal, the higher the output voltage, and the output voltage is proportional to the logarithm of the input signal amplitude, thereby expanding the dynamic range of the detection signal to 55dB..
  • WIDELY USED :The logarithmic power meter adopts advanced technology and exquisite craftsmanship, and has been improved to improve durability. Logarithmic detector can be widely used in radio frequency signal detection, signal power measurement, and environmental field strength detection..
  • LOGARITHMIC POWER METER :The package contains 1 x logarithmic power meter, the size is 6.5*3.5cm/2.6*1.4in, and the weight is about 9g/0.3oz, which can be used as part of automatic gain control and automatic level control..
Check Stock

Battery Monitor, DROK Amp Volt Power Watt Meter DC 0-300V 200A STN LCD Display Panel Meter, Current Voltage Energy Capacity Ammeter Voltmeter Multimeter Gauge with Hall Sensor, 2.5m Shielded Wire

  • Multifunctional Meter ---- DROK multimeter panel measures percentage and AH of remaining battery capacity, DC positive and negative bidirectional current, DC voltage, DC power and DC accumulated electric energy. Voltage measurement range is DC 0-300V, current measurement range is 0-200A..
  • Hall Sensor & Easy Mount ---- The voltage amperage meter is equipped with a Hall transformer for isolated measurement, which is more reliable and safer. Both two-wire and three-wire connection are available, two wires for testing 5-90V, three wires for monitoring 0-300V. Much more convenient with the long 2.5m shielded wire..
  • STN LCD Screen ---- The backlight of this battery capacity monitor can be controlled to be ON or OFF at user’s need.
  • Equipped with full view STN LCD screen, users could see the display clearly whenever at night and day, indoor or outside, even under the sunshine..
  • Alarming Function ---- The tester will alarm and flash when the real voltage or current is higher or lower than preset alarming ones, or the remaining capacity of battery is low..
  • Wide Applications ---- Can be used as dc amp meter, digital volt meter, power meter, battery capacity monitor. Suitable for all kinds of batteries, such as Lead-acid batteries, Lithium Polymer batteries, lithi....
Check Stock